Car unrecognized after update #42
Comments
|
You running beta or release. WP? What options are turned on. |
|
Release, no panda. I believe all my toggles are stock/default |
|
Make sure the speed spoof is off. Maybe it was turned on somehow. |
|
It is off. I went through all the settings to see if something looked off, and it all looks totally normal. |
|
Make sure the speed spoof is off. Maybe it was turned on somehow. Can you try the beta branch? |
|
Also make sure auto on ACC is off. |
|
I will try installing the beta right now |
|
Ok, for whatever reason, it wouldn’t take the beta or release url, so I put in the stock open pilot url and it downloaded just fine. But after installation, I still get far unrecognized. How does this get fixed? I’ve got a 30 hour road trip coming up this weekend and this would SUCK to not have. |
So that's weird. Check all your cables. Something else is going on. |
|
Could it just be the new version that’s causing the issue?
…On Tue, May 7, 2024 at 4:17 PM Miniz199922 ***@***.***> wrote:
Ok, for whatever reason, it wouldn’t take the beta or release url, so I
put in the stock open pilot url and it downloaded just fine. But after
installation, I still get far unrecognized. How does this get fixed? I’ve
got a 30 hour road trip coming up this weekend and this would SUCK to not
have.
So that's weird. Check all your cables. Something else is going on.
—
Reply to this email directly, view it on GitHub
<#42 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A743NCXLIPHGHVW52OOEKK3ZBFOHDAVCNFSM6AAAAABHL3MFIOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOJZGQ3DCNBVHE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Install this one bit.ly/jvePilot-beta then check for update and select a different branch like upgrade/0.9.5 if that works you will have to do a pull request for openpilot because all forks pull from them. |
|
This is what I keep getting. “Download failed”
…On Tue, May 7, 2024 at 4:26 PM Miniz199922 ***@***.***> wrote:
Could it just be the new version that’s causing the issue?
On Tue, May 7, 2024 at 4:17 PM Miniz199922 *@*.***> wrote:
Ok, for whatever reason, it wouldn’t take the beta or release url, so I
put in the stock open pilot url and it downloaded just fine. But after
installation, I still get far unrecognized. How does this get fixed? I’ve
got a 30 hour road trip coming up this weekend and this would SUCK to not
have.
So that's weird. Check all your cables. Something else is going on.
—
Reply to this email directly, view it on GitHub
#42 (comment)
<#42 (comment)>
,
or unsubscribe
https://github.com/notifications/unsubscribe-auth/A743NCXLIPHGHVW52OOEKK3ZBFOHDAVCNFSM6AAAAABHL3MFIOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOJZGQ3DCNBVHE
.
You are receiving this because you authored the thread.Message ID:
*@*.***>
Install this one bit.ly/jvePilot-beta then check for update and select a
different branch like upgrade/0.9.5
—
Reply to this email directly, view it on GitHub
<#42 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A743NCXHJKNKLXH7NJKDXYLZBFPKZAVCNFSM6AAAAABHL3MFIOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOJZGQ3DSMBRGE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Something is wrong. Did you hard reset it? Keep tapping on comma logo after restart. |
|
I’m doing a fastboot AGNOS install right now. Almost done with that.
…On Tue, May 7, 2024 at 4:53 PM Miniz199922 ***@***.***> wrote:
This is what I keep getting. “Download failed”
On Tue, May 7, 2024 at 4:26 PM Miniz199922 *@*.***> wrote:
Could it just be the new version that’s causing the issue?
On Tue, May 7, 2024 at 4:17 PM Miniz199922 *@*.***> wrote:
Ok, for whatever reason, it wouldn’t take the beta or release url, so I
put in the stock open pilot url and it downloaded just fine. But after
installation, I still get far unrecognized. How does this get fixed? I’ve
got a 30 hour road trip coming up this weekend and this would SUCK to not
have.
So that's weird. Check all your cables. Something else is going on.
—
Reply to this email directly, view it on GitHub
#42 <#42> (comment)
#42 (comment)
<#42 (comment)>
,
or unsubscribe
https://github.com/notifications/unsubscribe-auth/A743NCXLIPHGHVW52OOEKK3ZBFOHDAVCNFSM6AAAAABHL3MFIOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOJZGQ3DCNBVHE
.
You are receiving this because you authored the thread.Message ID:
*@*.***>
Install this one bit.ly/jvePilot-beta then check for update and select a
different branch like upgrade/0.9.5
—
Reply to this email directly, view it on GitHub
#42 (comment)
<#42 (comment)>
,
or unsubscribe
https://github.com/notifications/unsubscribe-auth/A743NCXHJKNKLXH7NJKDXYLZBFPKZAVCNFSM6AAAAABHL3MFIOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOJZGQ3DSMBRGE
.
You are receiving this because you authored the thread.Message ID:
*@*.***>
Something is wrong. Did you hard reset it? Keep tapping on comma logo
after restart.
—
Reply to this email directly, view it on GitHub
<#42 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A743NCQHQXCCU3HZAC6W5PLZBFSRPAVCNFSM6AAAAABHL3MFIOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOJZGQ4TCMJSGQ>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
Literally giving me the same Download Failed message after AGNOS
reinstall....
On Tue, May 7, 2024 at 4:55 PM David Perkins ***@***.***>
wrote:
… I’m doing a fastboot AGNOS install right now. Almost done with that.
On Tue, May 7, 2024 at 4:53 PM Miniz199922 ***@***.***>
wrote:
> This is what I keep getting. “Download failed”
>
> On Tue, May 7, 2024 at 4:26 PM Miniz199922 *@*.***> wrote:
>
> Could it just be the new version that’s causing the issue?
>
> On Tue, May 7, 2024 at 4:17 PM Miniz199922 *@*.***> wrote:
>
> Ok, for whatever reason, it wouldn’t take the beta or release url, so I
> put in the stock open pilot url and it downloaded just fine. But after
> installation, I still get far unrecognized. How does this get fixed? I’ve
> got a 30 hour road trip coming up this weekend and this would SUCK to not
> have.
>
> So that's weird. Check all your cables. Something else is going on.
>
> —
> Reply to this email directly, view it on GitHub
> #42 <#42> (comment)
> #42 (comment)
> <#42 (comment)>
> ,
> or unsubscribe
>
>
> https://github.com/notifications/unsubscribe-auth/A743NCXLIPHGHVW52OOEKK3ZBFOHDAVCNFSM6AAAAABHL3MFIOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOJZGQ3DCNBVHE
> .
> You are receiving this because you authored the thread.Message ID:
> *@*.***>
>
> Install this one bit.ly/jvePilot-beta then check for update and select a
> different branch like upgrade/0.9.5
>
> —
> Reply to this email directly, view it on GitHub
> #42 (comment)
> <#42 (comment)>
> ,
> or unsubscribe
>
> https://github.com/notifications/unsubscribe-auth/A743NCXHJKNKLXH7NJKDXYLZBFPKZAVCNFSM6AAAAABHL3MFIOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOJZGQ3DSMBRGE
> .
> You are receiving this because you authored the thread.Message ID:
> *@*.***>
>
> Something is wrong. Did you hard reset it? Keep tapping on comma logo
> after restart.
>
> —
> Reply to this email directly, view it on GitHub
> <#42 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/A743NCQHQXCCU3HZAC6W5PLZBFSRPAVCNFSM6AAAAABHL3MFIOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOJZGQ4TCMJSGQ>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
|
|
Are you in discord asking the, support channel. Think your device is having an issue. Or do you think it's your Wi-Fi? |
|
Not my wifi---I'm a network engineer... Holy crap, I got it to take! The only thing I changed was the p in Pilot was not capitalized. I had no idea that would be case sensitive.... Now I'm going to go back down to my car to see if it'll recognize it... |
|
Ok if it doesn't work check for update and select the other branch for 0.9.5 |
|
Didn’t work, trying to get 0.9.5 back now…
…On Tue, May 7, 2024 at 5:20 PM Miniz199922 ***@***.***> wrote:
Ok if it doesn't work check for update and select the other branch for
0.9.5
—
Reply to this email directly, view it on GitHub
<#42 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A743NCQPOFBGEFE3UGYU3JLZBFVULAVCNFSM6AAAAABHL3MFIOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOJZGUYTEMRYGM>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
Well, there goes 3 hours of my life I’ll never get back…but it works again
now that I’m back on 0.9.5. Would be nice if someone can make sure people
know about this until it gets fixed.
Thank you for your help and sticking through this with me. Couldn’t have
figured it out without you!
On Tue, May 7, 2024 at 5:36 PM David Perkins ***@***.***>
wrote:
… Didn’t work, trying to get 0.9.5 back now…
On Tue, May 7, 2024 at 5:20 PM Miniz199922 ***@***.***>
wrote:
> Ok if it doesn't work check for update and select the other branch for
> 0.9.5
>
> —
> Reply to this email directly, view it on GitHub
> <#42 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/A743NCQPOFBGEFE3UGYU3JLZBFVULAVCNFSM6AAAAABHL3MFIOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOJZGUYTEMRYGM>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
|
|
You need to report this on the comma GitHub or it will never get fixed. |
|
@Miniz199922 thanks for helping out here! @dperk11 Comma has switched to a new fingerprinting method for our vehicles and it's missing some Jeep codes. If you don't get your codes into the main branch, your Jeep will be left behind. Here is a tutorial: https://github.com/commaai/openpilot/wiki/Fingerprinting |
|
Thanks John, I’ll go through that tutorial and see if I can figure it out.
…On Tue, May 7, 2024 at 7:13 PM John Van Etten ***@***.***> wrote:
@Miniz199922 <https://github.com/Miniz199922> thanks for helping out here!
@dperk11 <https://github.com/dperk11> Comma has switched to a new
fingerprinting method for our vehicles and it's missing some Jeep codes. If
you don't get your codes into the main branch, your Jeep will be left
behind. Here is a tutorial:
https://github.com/commaai/openpilot/wiki/Fingerprinting
—
Reply to this email directly, view it on GitHub
<#42 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A743NCSWI3K4KTZVHYLVJB3ZBGC43AVCNFSM6AAAAABHL3MFIOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOJZGYYDKNZZGU>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
|
Holy crap that’s a little daunting for the lay person haha. Not sure I’m up
for that process…
Might just be left behind….
On Tue, May 7, 2024 at 7:32 PM David Perkins ***@***.***>
wrote:
… Thanks John, I’ll go through that tutorial and see if I can figure it out.
On Tue, May 7, 2024 at 7:13 PM John Van Etten ***@***.***>
wrote:
> @Miniz199922 <https://github.com/Miniz199922> thanks for helping out
> here!
>
> @dperk11 <https://github.com/dperk11> Comma has switched to a new
> fingerprinting method for our vehicles and it's missing some Jeep codes. If
> you don't get your codes into the main branch, your Jeep will be left
> behind. Here is a tutorial:
> https://github.com/commaai/openpilot/wiki/Fingerprinting
>
> —
> Reply to this email directly, view it on GitHub
> <#42 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/A743NCSWI3K4KTZVHYLVJB3ZBGC43AVCNFSM6AAAAABHL3MFIOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOJZGYYDKNZZGU>
> .
> You are receiving this because you were mentioned.Message ID:
> ***@***.***>
>
|
|
@dperk11 I agree. I should be able to help when I'm back from my work trip. DM me on discord. |
I did the most recent update today 0.9.6 and now OP says Car unrecognized. This is a 2019 grand Cherokee with a comma 3.
The text was updated successfully, but these errors were encountered: