stigs

Overview

Chainguard has developed a STIG profile for images built with Wolfi, namely, all Chainguard Images. The profile is based on the General Purpose Operating System (GPOS) STIG which defines hardening checks across a range of capabilities including cryptography, remote access, and internal configuration. The Chainguard GPOS STIG profile is compatible with common STIG checking tools including OpenSCAP and SCAP Viewer - instructions for using those tools are included below.

When the STIG profile is run against a Chainguard Image, the scanning tool will check several aspects of the image's configuration based on which GPOS checks apply to a container image. An explanation of each check is included and those checks marked as Not Applicable include a rationale section explaining why the checks do not apply. For more information on STIG scanning containers see DISA's Container Hardening Whitepaper

Getting Started

The simplest way to get started is to use Chainguard's pre-packaged Chainguard Image for openscap, which includes the openscap tool itself, the oscap-docker libraries, and the Chainguard GPOS STIG profile. This image is built with the same capabilities and low-to-zero CVEs as every other Chainguard image, and makes the otherwise difficult to setup openscap tool portable.

The instructions below assume that docker is installed and running on your system, and are intended to be performed on a non-production system, similar to the process outlined in DISA's Container Hardening Whitepaper.

For ease of use, we'll use the datastream file sourced from this repository, and available within Chainguard's openscap image, we'll refer to this as the scan image, and the target image we'll be scanning will be: cgr.dev/chainguard/wolfi-base:latest.

# Start the target image (required by openscap-docker)
docker run --name target -d cgr.dev/chainguard/wolfi-base:latest tail -f /dev/null

# Run the scan image against the target image
# NOTE: This is a highly privileged container since we're scanning a container being run by the host's docker daemon.
docker run -i --rm -u 0:0 --pid=host \
  -v /var/run/docker.sock:/var/run/docker.sock \
  -v $(pwd)/out:/out \
  --entrypoint sh \
  cgr.dev/chainguard/openscap:latest-dev <<_END_DOCKER_RUN
oscap-docker container target xccdf eval \
  --profile "xccdf_basic_profile_.check" \
  --report /out/report.html \
  --results /out/results.xml \
  /usr/share/xml/scap/ssg/content/ssg-chainguard-gpos-ds.xml
_END_DOCKER_RUN

The results of the scan will be written to the current directory in the out directory. The report.html file will contain a human-readable report of the scan results, and the results.xml file will contain the raw results of the scan.

Alternative Uses

The SSG content in this repository can be used by any other tool that supports the format, such as SCAP Workbench. For an alternative walkthrough of using SCAP workbench, see alternative uses.

Updates

The Chainguard STIG profile is re-evaluated and evolves alongside Wolfi OS and Chainguard images. New releases of the profile is marked by a new version number. The cgr.dev/chainguard/openscap:latest image always contains the latest version of the Chainguard GPOS profile.