Merge tag 'v6.4-rc5' into media_stage

Linux 6.4-rc5

* tag 'v6.4-rc5': (919 commits)
  Linux 6.4-rc5
  leds: qcom-lpg: Fix PWM period limits
  selftests/ftrace: Choose target function for filter test from samples
  KVM: selftests: Add test for race in kvm_recalculate_apic_map()
  KVM: x86: Bail from kvm_recalculate_phys_map() if x2APIC ID is out-of-bounds
  KVM: x86: Account fastpath-only VM-Exits in vCPU stats
  KVM: SVM: vNMI pending bit is V_NMI_PENDING_MASK not V_NMI_BLOCKING_MASK
  KVM: x86/mmu: Grab memslot for correct address space in NX recovery worker
  tpm, tpm_tis: correct tpm_tis_flags enumeration values
  Revert "ext4: remove ac->ac_found > sbi->s_mb_min_to_scan dead check in ext4_mb_check_limits"
  media: uvcvideo: Don't expose unsupported formats to userspace
  media: v4l2-subdev: Fix missing kerneldoc for client_caps
  media: staging: media: imx: initialize hs_settle to avoid warning
  media: v4l2-mc: Drop subdev check in v4l2_create_fwnode_links_to_pad()
  riscv: Implement missing huge_ptep_get
  riscv: Fix huge_ptep_set_wrprotect when PTE is a NAPOT
  module/decompress: Fix error checking on zstd decompression
  fork, vhost: Use CLONE_THREAD to fix freezer/ps regression
  dt-bindings: serial: 8250_omap: add rs485-rts-active-high
  selinux: don't use make's grouped targets feature yet
  ...

.mailmap

@@ -364,6 +364,11 @@ Nicolas Pitre <nico@fluxnic.net> <nico@linaro.org>
 Nicolas Saenz Julienne <nsaenz@kernel.org> <nsaenzjulienne@suse.de>
 Nicolas Saenz Julienne <nsaenz@kernel.org> <nsaenzjulienne@suse.com>
 Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
+Nikolay Aleksandrov <razor@blackwall.org> <naleksan@redhat.com>
+Nikolay Aleksandrov <razor@blackwall.org> <nikolay@redhat.com>
+Nikolay Aleksandrov <razor@blackwall.org> <nikolay@cumulusnetworks.com>
+Nikolay Aleksandrov <razor@blackwall.org> <nikolay@nvidia.com>
+Nikolay Aleksandrov <razor@blackwall.org> <nikolay@isovalent.com>
 Oleksandr Natalenko <oleksandr@natalenko.name> <oleksandr@redhat.com>
 Oleksij Rempel <linux@rempel-privat.de> <bug-track@fisher-privat.net>
 Oleksij Rempel <linux@rempel-privat.de> <external.Oleksij.Rempel@de.bosch.com>

CREDITS

@@ -1706,6 +1706,10 @@ S: Panoramastrasse 18
 S: D-69126 Heidelberg
 S: Germany
 
+N: Neil Horman
+M: nhorman@tuxdriver.com
+D: SCTP protocol maintainer.
+
 N: Simon Horman
 M: horms@verge.net.au
 D: Renesas ARM/ARM64 SoC maintainer

Documentation/admin-guide/cifs/changes.rst

@@ -5,5 +5,5 @@ Changes
 See https://wiki.samba.org/index.php/LinuxCIFSKernel for summary
 information about fixes/improvements to CIFS/SMB2/SMB3 support (changes
 to cifs.ko module) by kernel version (and cifs internal module version).
-This may be easier to read than parsing the output of "git log fs/cifs"
-by release.
+This may be easier to read than parsing the output of
+"git log fs/smb/client" by release.

Documentation/admin-guide/cifs/usage.rst

@@ -45,7 +45,7 @@ Installation instructions
 
 If you have built the CIFS vfs as module (successfully) simply
 type ``make modules_install`` (or if you prefer, manually copy the file to
-the modules directory e.g. /lib/modules/2.4.10-4GB/kernel/fs/cifs/cifs.ko).
+the modules directory e.g. /lib/modules/6.3.0-060300-generic/kernel/fs/smb/client/cifs.ko).
 
 If you have built the CIFS vfs into the kernel itself, follow the instructions
 for your distribution on how to install a new kernel (usually you
@@ -66,15 +66,15 @@ If cifs is built as a module, then the size and number of network buffers
 and maximum number of simultaneous requests to one server can be configured.
 Changing these from their defaults is not recommended. By executing modinfo::
 
-	modinfo kernel/fs/cifs/cifs.ko
+	modinfo <path to cifs.ko>
 
-on kernel/fs/cifs/cifs.ko the list of configuration changes that can be made
+on kernel/fs/smb/client/cifs.ko the list of configuration changes that can be made
 at module initialization time (by running insmod cifs.ko) can be seen.
 
 Recommendations
 ===============
 
-To improve security the SMB2.1 dialect or later (usually will get SMB3) is now
+To improve security the SMB2.1 dialect or later (usually will get SMB3.1.1) is now
 the new default. To use old dialects (e.g. to mount Windows XP) use "vers=1.0"
 on mount (or vers=2.0 for Windows Vista).  Note that the CIFS (vers=1.0) is
 much older and less secure than the default dialect SMB3 which includes

Documentation/admin-guide/quickly-build-trimmed-linux.rst

@@ -215,12 +215,14 @@ again.
    reduce the compile time enormously, especially if you are running an
    universal kernel from a commodity Linux distribution.
 
-   There is a catch: the make target 'localmodconfig' will disable kernel
-   features you have not directly or indirectly through some program utilized
-   since you booted the system. You can reduce or nearly eliminate that risk by
-   using tricks outlined in the reference section; for quick testing purposes
-   that risk is often negligible, but it is an aspect you want to keep in mind
-   in case your kernel behaves oddly.
+   There is a catch: 'localmodconfig' is likely to disable kernel features you
+   did not use since you booted your Linux -- like drivers for currently
+   disconnected peripherals or a virtualization software not haven't used yet.
+   You can reduce or nearly eliminate that risk with tricks the reference
+   section outlines; but when building a kernel just for quick testing purposes
+   it is often negligible if such features are missing. But you should keep that
+   aspect in mind when using a kernel built with this make target, as it might
+   be the reason why something you only use occasionally stopped working.
 
    [:ref:`details<configuration>`]
 
@@ -271,6 +273,9 @@ again.
    does nothing at all; in that case you have to manually install your kernel,
    as outlined in the reference section.
 
+   If you are running a immutable Linux distribution, check its documentation
+   and the web to find out how to install your own kernel there.
+
    [:ref:`details<install>`]
 
 .. _another_sbs:
@@ -291,29 +296,29 @@ again.
    version you care about, as git otherwise might retrieve the entire commit
    history::
 
-     git fetch --shallow-exclude=v6.1 origin
-
-   If you modified the sources (for example by applying a patch), you now need
-   to discard those modifications; that's because git otherwise will not be able
-   to switch to the sources of another version due to potential conflicting
-   changes::
-
-     git reset --hard
+     git fetch --shallow-exclude=v6.0 origin
 
-   Now checkout the version you are interested in, as explained above::
+   Now switch to the version you are interested in -- but be aware the command
+   used here will discard any modifications you performed, as they would
+   conflict with the sources you want to checkout::
 
-     git checkout --detach origin/master
+     git checkout --force --detach origin/master
 
    At this point you might want to patch the sources again or set/modify a build
-   tag, as explained earlier; afterwards adjust the build configuration to the
-   new codebase and build your next kernel::
+   tag, as explained earlier. Afterwards adjust the build configuration to the
+   new codebase using olddefconfig, which will now adjust the configuration file
+   you prepared earlier using localmodconfig  (~/linux/.config) for your next
+   kernel::
 
      # reminder: if you want to apply patches, do it at this point
      # reminder: you might want to update your build tag at this point
      make olddefconfig
+
+   Now build your kernel::
+
      make -j $(nproc --all)
 
-   Install the kernel as outlined above::
+   Afterwards install the kernel as outlined above::
 
      command -v installkernel && sudo make modules_install install
 
@@ -584,11 +589,11 @@ versions and individual commits at hand at any time::
     curl -L \
       https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/clone.bundle \
       -o linux-stable.git.bundle
-    git clone clone.bundle ~/linux/
+    git clone linux-stable.git.bundle ~/linux/
     rm linux-stable.git.bundle
     cd ~/linux/
-    git remote set-url origin
-    https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
+    git remote set-url origin \
+      https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
     git fetch origin
     git checkout --detach origin/master
 

Documentation/cdrom/index.rst

@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-=====
-cdrom
-=====
+======
+CD-ROM
+======
 
 .. toctree::
     :maxdepth: 1

Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml

@@ -32,7 +32,7 @@ properties:
     maxItems: 1
 
   iommus:
-    maxItems: 1
+    maxItems: 4
 
   power-domains:
     maxItems: 1

Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml

@@ -82,6 +82,18 @@ properties:
       Indicates if the DSI controller is driving a panel which needs
       2 DSI links.
 
+  qcom,master-dsi:
+    type: boolean
+    description: |
+      Indicates if the DSI controller is the master DSI controller when
+      qcom,dual-dsi-mode enabled.
+
+  qcom,sync-dual-dsi:
+    type: boolean
+    description: |
+      Indicates if the DSI controller needs to sync the other DSI controller
+      with MIPI DCS commands when qcom,dual-dsi-mode enabled.
+
   assigned-clocks:
     minItems: 2
     maxItems: 4

Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Lattice Slave SPI sysCONFIG FPGA manager
 
 maintainers:
-  - Ivan Bornyakov <i.bornyakov@metrotek.ru>
+  - Vladimir Georgiev <v.georgiev@metrotek.ru>
 
 description: |
   Lattice sysCONFIG port, which is used for FPGA configuration, among others,

Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Microchip Polarfire FPGA manager.
 
 maintainers:
-  - Ivan Bornyakov <i.bornyakov@metrotek.ru>
+  - Vladimir Georgiev <v.georgiev@metrotek.ru>
 
 description:
   Device Tree Bindings for Microchip Polarfire FPGA Manager using slave SPI to

Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml

@@ -39,6 +39,12 @@ properties:
   power-domains:
     maxItems: 1
 
+  vref-supply:
+    description: |
+      External ADC reference voltage supply on VREFH pad. If VERID[MVI] is
+      set, there are additional, internal reference voltages selectable.
+      VREFH1 is always from VREFH pad.
+
   "#io-channel-cells":
     const: 1
 
@@ -72,6 +78,7 @@ examples:
             assigned-clocks = <&clk IMX_SC_R_ADC_0>;
             assigned-clock-rates = <24000000>;
             power-domains = <&pd IMX_SC_R_ADC_0>;
+            vref-supply = <&reg_1v8>;
             #io-channel-cells = <1>;
         };
     };

Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml

@@ -90,7 +90,7 @@ patternProperties:
             of the MAX chips to the GyroADC, while MISO line of each Maxim
             ADC connects to a shared input pin of the GyroADC.
         enum:
-          - adi,7476
+          - adi,ad7476
           - fujitsu,mb88101a
           - maxim,max1162
           - maxim,max11100

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml

@@ -166,6 +166,12 @@ properties:
   resets:
     maxItems: 1
 
+  mediatek,broken-save-restore-fw:
+    type: boolean
+    description:
+      Asserts that the firmware on this device has issues saving and restoring
+      GICR registers when the GIC redistributors are powered off.
+
 dependencies:
   mbi-ranges: [ msi-controller ]
   msi-controller: [ mbi-ranges ]

Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml

@@ -21,11 +21,22 @@ properties:
 
   st,can-primary:
     description:
-      Primary and secondary mode of the bxCAN peripheral is only relevant
-      if the chip has two CAN peripherals. In that case they share some
-      of the required logic.
+      Primary mode of the bxCAN peripheral is only relevant if the chip has
+      two CAN peripherals in dual CAN configuration. In that case they share
+      some of the required logic.
+      Not to be used if the peripheral is in single CAN configuration.
       To avoid misunderstandings, it should be noted that ST documentation
-      uses the terms master/slave instead of primary/secondary.
+      uses the terms master instead of primary.
+    type: boolean
+
+  st,can-secondary:
+    description:
+      Secondary mode of the bxCAN peripheral is only relevant if the chip
+      has two CAN peripherals in dual CAN configuration. In that case they
+      share some of the required logic.
+      Not to be used if the peripheral is in single CAN configuration.
+      To avoid misunderstandings, it should be noted that ST documentation
+      uses the terms slave instead of secondary.
     type: boolean
 
   reg:

Documentation/devicetree/bindings/serial/8250_omap.yaml

@@ -70,6 +70,7 @@ properties:
   dsr-gpios: true
   rng-gpios: true
   dcd-gpios: true
+  rs485-rts-active-high: true
   rts-gpio: true
   power-domains: true
   clock-frequency: true

Documentation/devicetree/bindings/sound/tas2562.yaml

@@ -55,7 +55,9 @@ properties:
     description: TDM TX current sense time slot.
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -72,7 +74,7 @@ examples:
      codec: codec@4c {
        compatible = "ti,tas2562";
        reg = <0x4c>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        shutdown-gpios = <&gpio1 15 0>;

Documentation/devicetree/bindings/sound/tas2770.yaml

@@ -57,7 +57,9 @@ properties:
       - 1 # Falling edge
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -74,7 +76,7 @@ examples:
      codec: codec@41 {
        compatible = "ti,tas2770";
        reg = <0x41>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        reset-gpio = <&gpio1 15 0>;

Documentation/devicetree/bindings/sound/tas27xx.yaml

@@ -50,7 +50,9 @@ properties:
     description: TDM TX voltage sense time slot.
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -67,7 +69,7 @@ examples:
      codec: codec@38 {
        compatible = "ti,tas2764";
        reg = <0x38>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        reset-gpios = <&gpio1 15 0>;

Documentation/devicetree/bindings/sound/tlv320aic32x4.txt

@@ -8,7 +8,7 @@ Required properties:
 	"ti,tlv320aic32x6" TLV320AIC3206, TLV320AIC3256
 	"ti,tas2505" TAS2505, TAS2521
  - reg: I2C slave address
- - supply-*: Required supply regulators are:
+ - *-supply: Required supply regulators are:
     "iov" - digital IO power supply
     "ldoin" - LDO power supply
     "dv" - Digital core power supply

Documentation/devicetree/bindings/usb/cdns,usb3.yaml

@@ -64,7 +64,7 @@ properties:
     description:
       size of memory intended as internal memory for endpoints
       buffers expressed in KB
-    $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint16
 
   cdns,phyrst-a-enable:
     description: Enable resetting of PHY if Rx fail is detected

Documentation/devicetree/bindings/usb/snps,dwc3.yaml

@@ -287,7 +287,7 @@ properties:
     description:
       High-Speed PHY interface selection between UTMI+ and ULPI when the
       DWC_USB3_HSPHY_INTERFACE has value 3.
-    $ref: /schemas/types.yaml#/definitions/uint8
+    $ref: /schemas/types.yaml#/definitions/string
     enum: [utmi, ulpi]
 
   snps,quirk-frame-length-adjustment:

Documentation/filesystems/index.rst

@@ -72,7 +72,6 @@ Documentation for filesystem implementations.
    befs
    bfs
    btrfs
-   cifs/index
    ceph
    coda
    configfs
@@ -111,6 +110,7 @@ Documentation for filesystem implementations.
    ramfs-rootfs-initramfs
    relay
    romfs
+   smb/index
    spufs/index
    squashfs
    sysfs

Documentation/filesystems/ramfs-rootfs-initramfs.rst

@@ -6,8 +6,7 @@ Ramfs, rootfs and initramfs
 
 October 17, 2005
 
-Rob Landley <rob@landley.net>
-=============================
+:Author: Rob Landley <rob@landley.net>
 
 What is ramfs?
 --------------