pwmout - M451 - add read methods for period and pulsewidth

targets/TARGET_NUVOTON/TARGET_M451/pwmout_api.c

@@ -13,7 +13,7 @@
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
- 
+
 #include "pwmout_api.h"
 
 #if DEVICE_PWMOUT
@@ -46,20 +46,20 @@ static const struct nu_modinit_s pwm_modinit_tab[] = {
     {PWM_0_3, PWM0_MODULE, CLK_CLKSEL2_PWM0SEL_PCLK0, 0, PWM0_RST, PWM0P1_IRQn, &pwm0_var},
     {PWM_0_4, PWM0_MODULE, CLK_CLKSEL2_PWM0SEL_PCLK0, 0, PWM0_RST, PWM0P2_IRQn, &pwm0_var},
     {PWM_0_5, PWM0_MODULE, CLK_CLKSEL2_PWM0SEL_PCLK0, 0, PWM0_RST, PWM0P2_IRQn, &pwm0_var},
-    
+
     {PWM_1_0, PWM1_MODULE, CLK_CLKSEL2_PWM1SEL_PCLK1, 0, PWM1_RST, PWM1P0_IRQn, &pwm1_var},
     {PWM_1_1, PWM1_MODULE, CLK_CLKSEL2_PWM1SEL_PCLK1, 0, PWM1_RST, PWM1P0_IRQn, &pwm1_var},
     {PWM_1_2, PWM1_MODULE, CLK_CLKSEL2_PWM1SEL_PCLK1, 0, PWM1_RST, PWM1P1_IRQn, &pwm1_var},
     {PWM_1_3, PWM1_MODULE, CLK_CLKSEL2_PWM1SEL_PCLK1, 0, PWM1_RST, PWM1P1_IRQn, &pwm1_var},
     {PWM_1_4, PWM1_MODULE, CLK_CLKSEL2_PWM1SEL_PCLK1, 0, PWM1_RST, PWM1P2_IRQn, &pwm1_var},
     {PWM_1_5, PWM1_MODULE, CLK_CLKSEL2_PWM1SEL_PCLK1, 0, PWM1_RST, PWM1P2_IRQn, &pwm1_var},
-    
+
     {NC, 0, 0, 0, 0, (IRQn_Type) 0, NULL}
 };
 
-static void pwmout_config(pwmout_t* obj);
+static void pwmout_config(pwmout_t *obj);
 
-void pwmout_init(pwmout_t* obj, PinName pin)
+void pwmout_init(pwmout_t *obj, PinName pin)
 {
     obj->pwm = (PWMName) pinmap_peripheral(pin, PinMap_PWM);
     MBED_ASSERT((int) obj->pwm != NC);
@@ -83,7 +83,7 @@ void pwmout_init(pwmout_t* obj, PinName pin)
     }
 
     // NOTE: All channels (identified by PWMName) share a PWM module. This reset will also affect other channels of the same PWM module.
-    if (! ((struct nu_pwm_var *) modinit->var)->en_msk) {
+    if (!((struct nu_pwm_var *) modinit->var)->en_msk) {
         // Reset this module if no channel enabled
         SYS_ResetModule(modinit->rsetidx);
     }
@@ -107,22 +107,22 @@ void pwmout_init(pwmout_t* obj, PinName pin)
     pwm_modinit_mask |= 1 << i;
 }
 
-void pwmout_free(pwmout_t* obj)
+void pwmout_free(pwmout_t *obj)
 {
     PWM_T *pwm_base = (PWM_T *) NU_MODBASE(obj->pwm);
     uint32_t chn =  NU_MODSUBINDEX(obj->pwm);
     PWM_ForceStop(pwm_base, 1 << chn);
-    
+
     const struct nu_modinit_s *modinit = get_modinit(obj->pwm, pwm_modinit_tab);
     MBED_ASSERT(modinit != NULL);
     MBED_ASSERT(modinit->modname == obj->pwm);
     ((struct nu_pwm_var *) modinit->var)->en_msk &= ~(1 << chn);
-    
-    
+
+
     if ((((struct nu_pwm_var *) modinit->var)->en_msk & 0x3F) == 0) {
         CLK_DisableModuleClock(modinit->clkidx);
     }
-    
+
     // Mark this module to be deinited.
     int i = modinit - pwm_modinit_tab;
     pwm_modinit_mask &= ~(1 << i);
@@ -132,29 +132,29 @@ void pwmout_free(pwmout_t* obj)
     obj->pin = NC;
 }
 
-void pwmout_write(pwmout_t* obj, float value)
+void pwmout_write(pwmout_t *obj, float value)
 {
-    obj->pulsewidth_us = NU_CLAMP((uint32_t) (value * obj->period_us), 0, obj->period_us);
+    obj->pulsewidth_us = NU_CLAMP((uint32_t)(value * obj->period_us), 0, obj->period_us);
     pwmout_config(obj);
 }
 
-float pwmout_read(pwmout_t* obj)
+float pwmout_read(pwmout_t *obj)
 {
     return NU_CLAMP((((float) obj->pulsewidth_us) / obj->period_us), 0.0f, 1.0f);
 }
 
-void pwmout_period(pwmout_t* obj, float seconds)
+void pwmout_period(pwmout_t *obj, float seconds)
 {
     pwmout_period_us(obj, seconds * 1000000.0f);
 }
 
-void pwmout_period_ms(pwmout_t* obj, int ms)
+void pwmout_period_ms(pwmout_t *obj, int ms)
 {
     pwmout_period_us(obj, ms * 1000);
 }
 
 // Set the PWM period, keeping the duty cycle the same.
-void pwmout_period_us(pwmout_t* obj, int us)
+void pwmout_period_us(pwmout_t *obj, int us)
 {
     uint32_t period_us_old = obj->period_us;
     uint32_t pulsewidth_us_old = obj->pulsewidth_us;
@@ -163,23 +163,32 @@ void pwmout_period_us(pwmout_t* obj, int us)
     pwmout_config(obj);
 }
 
-void pwmout_pulsewidth(pwmout_t* obj, float seconds)
+int pwmout_read_period_us(pwmout_t *obj)
+{
+    return obj->period_us;
+}
+
+void pwmout_pulsewidth(pwmout_t *obj, float seconds)
 {
     pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
 }
 
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
+void pwmout_pulsewidth_ms(pwmout_t *obj, int ms)
 {
     pwmout_pulsewidth_us(obj, ms * 1000);
 }
 
-void pwmout_pulsewidth_us(pwmout_t* obj, int us)
+void pwmout_pulsewidth_us(pwmout_t *obj, int us)
 {
     obj->pulsewidth_us = NU_CLAMP(us, 0, obj->period_us);
     pwmout_config(obj);
 }
 
-static void pwmout_config(pwmout_t* obj)
+int pwmout_read_pulsewidth_us(pwmout_t *obj {
+    return obj->pulsewidth_us;
+}
+
+static void pwmout_config(pwmout_t *obj)
 {
     PWM_T *pwm_base = (PWM_T *) NU_MODBASE(obj->pwm);
     uint32_t chn = NU_MODSUBINDEX(obj->pwm);