Home
PCIeDuino is an Android clone with a full-sized mini-PCIe card form factor. It is based on SparkFun Pro Micro 3.3V/8MHz board.
The bill of materials (BOM) spreadsheet is on Google Drive (no login required).
Currently need manual flashing with avrdude, as the Arduino IDE on ARM platforms don't seem to work too well. Need to press the reset button x2 (to go into bootloader mode) to flash.
Bootloader can be flashed only with external connector (through the ISP header), as the USB line seem to cut connection at around 80% during the firmware upload, leaving the board in an unusable state!
(Details will follow)
- It's available on Tindie.
The hardware design and wiki content is released under CC BY-SA 3.0
