USB Screen

USB屏幕&编辑器

图文教程:

https://zhuanlan.zhihu.com/p/698789562

视频教程

https://www.bilibili.com/video/BV1eTTwe6EFU/?vd_source=a2700de3db7bd5f0117df32bdd5cef9f

硬件

支持的屏幕型号

目前支持 ST7735 128x160 和 ST7789 320x240两种屏幕

ST7735接线方式

    GND <=> GND
    VCC <=> 3V3
    SCL <=> SCLK(GPIO6)
    SDA <=> MOSI(GPIO7)
    RES <=> RST(GPIO14)
    DC  <=> DC(GPIO13)
    CS  <=> GND
    BLK <=> 不连接

ST7789接线方式

    GND   <=> GND
    VCC   <=> 3V3
    SCL   <=> PIN6(clk)
    SDA   <=> PIN7(mosi)
    RESET <=> PIN14(rst)
    AO    <=> PIN13
    CS    <=> PIN9
    BL    <=> 5V

固件源码

https://github.com/planet0104/rp2040_usb_screen

接线方式

编译

编译aarch64-linux

1、设置default features，启用 v4l-webcam

[features]
default = ["v4l-webcam", "usb-serial"]

2、启动 DockerDesktop

3、进入 wsl2 Ubuntu

4、安装 cross

cargo install cross --git https://github.com/cross-rs/cross

5、编译

注意 Cross.toml 中的配置

# rustup component add rust-src --toolchain nightly
RUSTFLAGS="-Zlocation-detail=none" cross +nightly build -Z build-std=std,panic_abort \
  -Z build-std-features=panic_immediate_abort \
  -Z build-std-features="optimize_for_size" \
  --target aarch64-unknown-linux-gnu --release

运行编辑器

windows中运行

设置 deault features

[features]
default = ["editor", "tray", "nokhwa-webcam"]

./run.cmd

Ubuntu中运行

设置 deault features

[features]
default = ["editor", "v4l-webcam"]

# export https_proxy=http://192.168.1.25:6003;export http_proxy=http://192.168.1.25:6003;export all_proxy=socks5://192.168.1.25:6003
# export https_proxy=;export http_proxy=;export all_proxy=;
sudo apt-get install -y libclang-dev libv4l-dev libudev-dev

sh run.sh
# sudo ./target/debug/USB-Screen
# sudo ./target/debug/USB-Screen editor

## v4l utils
## sudo apt install v4l-utils
## v4l2-ctl  --list-formats -d /dev/video0
## v4l2-ctl --list-formats-ext -d /dev/video0