update

update update update reset submodule
qmk · Jul 3, 2024 · a4f5754 · a4f5754
1 parent 00bc5af
commit a4f5754
Show file tree

Hide file tree

Showing 10 changed files with 116 additions and 118 deletions.
diff --git a/keyboards/nuphy/air75_v2/ansi/ansi.c b/keyboards/nuphy/air75_v2/ansi/ansi.c
@@ -15,7 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "user_kb.h"
+#include "kb_util.h"
 #include "ansi.h"
 #include "usb_main.h"
 
@@ -152,13 +152,13 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
 
         case SIDE_VAI:
             if (record->event.pressed) {
-                side_light_contol(1);
+                side_light_control(1);
             }
             return false;
 
         case SIDE_VAD:
             if (record->event.pressed) {
-                side_light_contol(0);
+                side_light_control(0);
             }
             return false;
 
@@ -176,13 +176,13 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
 
         case SIDE_SPI:
             if (record->event.pressed) {
-                side_speed_contol(1);
+                side_speed_control(1);
             }
             return false;
 
         case SIDE_SPD:
             if (record->event.pressed) {
-                side_speed_contol(0);
+                side_speed_control(0);
             }
             return false;
 
@@ -271,6 +271,4 @@ void housekeeping_task_kb(void) {
     side_led_show();
 
     sleep_handle();
-
-    housekeeping_task_user();
 }
diff --git a/keyboards/nuphy/air75_v2/ansi/info.json b/keyboards/nuphy/air75_v2/ansi/info.json
@@ -3,7 +3,7 @@
     "manufacturer": "NuPhy",
     "usb":{
         "vid": "0x19F5",
-        "pid": "0x3245",
+        "pid": "0x3246",
         "device_version": "0.0.1",
         "no_startup_check": true
     },
@@ -131,32 +131,32 @@
             {"matrix": [2, 16], "x": 150, "y": 20, "flags": 4},
 
             {"matrix": [1, 15], "x": 150, "y": 30, "flags": 4},
-            {"matrix": [3, 13], "x": 127.5, "y": 30, "flags": 4},
-            {"matrix": [3, 11], "x": 117.5, "y": 30, "flags": 4},
-            {"matrix": [3, 10], "x": 107.5, "y": 30, "flags": 4},
-            {"matrix": [3, 9], "x": 97.5, "y": 30, "flags": 4},
-            {"matrix": [3, 8], "x": 87.5, "y": 30, "flags": 4},
-            {"matrix": [3, 7], "x": 77.5, "y": 30, "flags": 4},
-            {"matrix": [3, 6], "x": 67.5, "y": 30, "flags": 4},
-            {"matrix": [3, 5], "x": 57.5, "y": 30, "flags": 4},
-            {"matrix": [3, 4], "x": 47.5, "y": 30, "flags": 4},
-            {"matrix": [3, 3], "x": 37.5, "y": 30, "flags": 4},
-            {"matrix": [3, 2], "x": 27.5, "y": 30, "flags": 4},
-            {"matrix": [3, 1], "x": 17.5, "y": 30, "flags": 4},
+            {"matrix": [3, 13], "x": 127, "y": 30, "flags": 4},
+            {"matrix": [3, 11], "x": 117, "y": 30, "flags": 4},
+            {"matrix": [3, 10], "x": 107, "y": 30, "flags": 4},
+            {"matrix": [3, 9], "x": 97, "y": 30, "flags": 4},
+            {"matrix": [3, 8], "x": 87, "y": 30, "flags": 4},
+            {"matrix": [3, 7], "x": 77, "y": 30, "flags": 4},
+            {"matrix": [3, 6], "x": 67, "y": 30, "flags": 4},
+            {"matrix": [3, 5], "x": 57, "y": 30, "flags": 4},
+            {"matrix": [3, 4], "x": 47, "y": 30, "flags": 4},
+            {"matrix": [3, 3], "x": 37, "y": 30, "flags": 4},
+            {"matrix": [3, 2], "x": 27, "y": 30, "flags": 4},
+            {"matrix": [3, 1], "x": 17, "y": 30, "flags": 4},
             {"matrix": [3, 0], "x": 0, "y": 30, "flags": 4},
 
             {"matrix": [4, 0], "x": 0, "y": 40, "flags": 4},
-            {"matrix": [4, 2], "x": 22.5, "y": 40, "flags": 4},
-            {"matrix": [4, 3], "x": 32.5, "y": 40, "flags": 4},
-            {"matrix": [4, 4], "x": 42.5, "y": 40, "flags": 4},
-            {"matrix": [4, 5], "x": 52.5, "y": 40, "flags": 4},
-            {"matrix": [4, 6], "x": 62.5, "y": 40, "flags": 4},
-            {"matrix": [4, 7], "x": 72.5, "y": 40, "flags": 4},
-            {"matrix": [4, 8], "x": 82.5, "y": 40, "flags": 4},
-            {"matrix": [4, 9], "x": 92.5, "y": 40, "flags": 4},
-            {"matrix": [4, 10], "x": 102.5, "y": 40, "flags": 4},
-            {"matrix": [4, 11], "x": 112.5, "y": 40, "flags": 4},
-            {"matrix": [4, 13], "x": 122.5, "y": 40, "flags": 4},
+            {"matrix": [4, 2], "x": 22, "y": 40, "flags": 4},
+            {"matrix": [4, 3], "x": 32, "y": 40, "flags": 4},
+            {"matrix": [4, 4], "x": 42, "y": 40, "flags": 4},
+            {"matrix": [4, 5], "x": 52, "y": 40, "flags": 4},
+            {"matrix": [4, 6], "x": 62, "y": 40, "flags": 4},
+            {"matrix": [4, 7], "x": 72, "y": 40, "flags": 4},
+            {"matrix": [4, 8], "x": 82, "y": 40, "flags": 4},
+            {"matrix": [4, 9], "x": 92, "y": 40, "flags": 4},
+            {"matrix": [4, 10], "x": 102, "y": 40, "flags": 4},
+            {"matrix": [4, 11], "x": 112, "y": 40, "flags": 4},
+            {"matrix": [4, 13], "x": 122, "y": 40, "flags": 4},
             {"matrix": [4, 14], "x": 140, "y": 40, "flags": 4},
             {"matrix": [2, 15], "x": 150, "y": 40, "flags": 4},
 
@@ -166,9 +166,9 @@
             {"matrix": [3, 14], "x": 120, "y": 50, "flags": 4},
             {"matrix": [5, 10], "x": 110, "y": 50, "flags": 4},
             {"matrix": [5, 9], "x": 100, "y": 50, "flags": 4},
-            {"matrix": [5, 6], "x": 37.5, "y": 50, "flags": 4},
+            {"matrix": [5, 6], "x": 37, "y": 50, "flags": 4},
             {"matrix": [5, 2], "x": 25, "y": 50, "flags": 4},
-            {"matrix": [5, 1], "x": 12.5, "y": 50, "flags": 4},
+            {"matrix": [5, 1], "x": 12, "y": 50, "flags": 4},
             {"matrix": [5, 0], "x": 0, "y": 50, "flags": 4},
             {"flags": 4}
         ]

diff --git a/keyboards/nuphy/air75_v2/ansi/user_kb.c → keyboards/nuphy/air75_v2/ansi/kb_util.c b/keyboards/nuphy/air75_v2/ansi/user_kb.c → keyboards/nuphy/air75_v2/ansi/kb_util.c
@@ -15,14 +15,14 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "user_kb.h"
+#include "kb_util.h"
 #include "ansi.h"
 #include "usb_main.h"
 #include "rf_driver.h"
 
 kb_config_t     kb_config;
 DEV_INFO_STRUCT dev_info = {
-    .rf_baterry = 100,
+    .rf_battery = 100,
     .link_mode  = LINK_USB,
     .rf_state   = RF_IDLE,
 };
@@ -59,32 +59,32 @@ extern uint8_t            side_rgb;
 extern uint8_t            side_colour;
 
 /**
- * @brief  gpio initial.
+ * @brief  Initialize GPIO.
  */
 void gpio_init(void) {
-    /* enable led power driver  */
-    setPinOutput(DRIVER_LED_CS_PIN);
-    setPinOutput(DRIVER_SIDE_CS_PIN);
-    writePinLow(DRIVER_LED_CS_PIN);
-    writePinLow(DRIVER_SIDE_CS_PIN);
-    /* set side led pin output low */
-    setPinOutput(DRIVER_SIDE_PIN);
-    writePinLow(DRIVER_SIDE_PIN);
+    /* enable LED power driver  */
+    gpio_set_pin_output_push_pull(DRIVER_LED_CS_PIN);
+    gpio_set_pin_output_push_pull(DRIVER_SIDE_CS_PIN);
+    gpio_write_pin_low(DRIVER_LED_CS_PIN);
+    gpio_write_pin_low(DRIVER_SIDE_CS_PIN);
+    /* set side LED pin output low */
+    gpio_set_pin_output_push_pull(DRIVER_SIDE_PIN);
+    gpio_write_pin_low(DRIVER_SIDE_PIN);
     /* config RF module pin */
-    setPinOutput(NRF_WAKEUP_PIN);
-    writePinHigh(NRF_WAKEUP_PIN);
-    setPinInputHigh(NRF_TEST_PIN);
+    gpio_set_pin_output_push_pull(NRF_WAKEUP_PIN);
+    gpio_write_pin_high(NRF_WAKEUP_PIN);
+    gpio_set_pin_input_high(NRF_TEST_PIN);
     /* reset RF module */
-    setPinOutput(NRF_RESET_PIN);
-    writePinLow(NRF_RESET_PIN);
+    gpio_set_pin_output_push_pull(NRF_RESET_PIN);
+    gpio_write_pin_low(NRF_RESET_PIN);
     wait_ms(50);
-    writePinHigh(NRF_RESET_PIN);
+    gpio_write_pin_high(NRF_RESET_PIN);
     /* config dial switch pin */
-    setPinInputHigh(DEV_MODE_PIN);
-    setPinInputHigh(SYS_MODE_PIN);
-    /* open led DC driver */
-    setPinOutput(DC_BOOST_PIN);
-    writePinHigh(DC_BOOST_PIN);
+    gpio_set_pin_input_high(DEV_MODE_PIN);
+    gpio_set_pin_input_high(SYS_MODE_PIN);
+    /* open LED DC driver */
+    gpio_set_pin_output_push_pull(DC_BOOST_PIN);
+    gpio_write_pin_high(DC_BOOST_PIN);
 }
 
 /**
@@ -118,7 +118,7 @@ void long_press_key(void) {
         rf_sw_press_delay = 0;
     }
 
-    // The device is restored to factory Settings
+    // The device is restored to factory settings
     if (f_dev_reset_press) {
         dev_reset_press_delay++;
         if (dev_reset_press_delay >= DEV_RESET_PRESS_DELAY) {
@@ -246,11 +246,11 @@ void dial_sw_scan(void) {
     }
     dial_scan_timer = timer_read32();
 
-    setPinInputHigh(DEV_MODE_PIN);
-    setPinInputHigh(SYS_MODE_PIN);
+    gpio_set_pin_input_high(DEV_MODE_PIN);
+    gpio_set_pin_input_high(SYS_MODE_PIN);
 
-    if (readPin(DEV_MODE_PIN)) dial_scan |= 0X01;
-    if (readPin(SYS_MODE_PIN)) dial_scan |= 0X02;
+    if (gpio_read_pin(DEV_MODE_PIN)) dial_scan |= 0X01;
+    if (gpio_read_pin(SYS_MODE_PIN)) dial_scan |= 0X02;
 
     if (dial_save != dial_scan) {
         break_all_key();
@@ -316,16 +316,16 @@ void dial_sw_fast_scan(void) {
     uint8_t dial_check_sys = 0;
     uint8_t debounce = 0;
 
-    setPinInputHigh(DEV_MODE_PIN);
-    setPinInputHigh(SYS_MODE_PIN);
+    gpio_set_pin_input_high(DEV_MODE_PIN);
+    gpio_set_pin_input_high(SYS_MODE_PIN);
 
     // Debounce to get a stable state
     for(debounce=0; debounce<10; debounce++) {
         dial_scan_dev = 0;
         dial_scan_sys = 0;
-        if (readPin(DEV_MODE_PIN))  dial_scan_dev = 0x01;
+        if (gpio_read_pin(DEV_MODE_PIN))  dial_scan_dev = 0x01;
         else                        dial_scan_dev = 0;
-        if (readPin(SYS_MODE_PIN))  dial_scan_sys = 0x01;
+        if (gpio_read_pin(SYS_MODE_PIN))  dial_scan_sys = 0x01;
         else                        dial_scan_sys = 0;
         if((dial_scan_dev != dial_check_dev)||(dial_scan_sys != dial_check_sys))
         {
@@ -399,7 +399,7 @@ void timer_pro(void) {
 void londing_eeprom_data(void) {
     eeconfig_read_kb_datablock(&kb_config);
     if (kb_config.default_brightness_flag != 0xA5) {
-        /* first power on, set rgb matrix brightness at middle level*/
+        /* upon first power on, set RGB matrix brightness to middle level */
         rgb_matrix_sethsv(255, 255, RGB_MATRIX_MAXIMUM_BRIGHTNESS - RGB_MATRIX_VAL_STEP * 2);
         kb_config.default_brightness_flag = 0xA5;
         kb_config.ee_side_mode            = side_mode;

diff --git a/keyboards/nuphy/air75_v2/ansi/user_kb.h → keyboards/nuphy/air75_v2/ansi/kb_util.h b/keyboards/nuphy/air75_v2/ansi/user_kb.h → keyboards/nuphy/air75_v2/ansi/kb_util.h
@@ -47,7 +47,7 @@ typedef enum {
 #define RF_DISCONNECT           4
 #define RF_SLEEP                5
 #define RF_SNIF                 6
-#define RF_INVAILD              0XFE
+#define RF_INVALID              0XFE
 #define RF_ERR_STATE            0XFF
 
 #define CMD_POWER_UP            0XF0
@@ -124,7 +124,7 @@ typedef struct
     uint8_t rf_state;
     uint8_t rf_charge;
     uint8_t rf_led;
-    uint8_t rf_baterry;
+    uint8_t rf_battery;
     uint8_t sys_sw_state;
 } DEV_INFO_STRUCT;
 
@@ -147,8 +147,8 @@ void    rf_device_init(void);
 void    uart_send_report_repeat(void);
 void    uart_receive_pro(void);
 void    uart_send_report(uint8_t report_type, uint8_t *report_buf, uint8_t report_size);
-void    side_speed_contol(uint8_t dir);
-void    side_light_contol(uint8_t dir);
+void    side_speed_control(uint8_t dir);
+void    side_light_control(uint8_t dir);
 void    side_colour_control(uint8_t dir);
 void    side_mode_control(uint8_t dir);
 void    side_led_show(void);

diff --git a/keyboards/nuphy/air75_v2/ansi/rf.c b/keyboards/nuphy/air75_v2/ansi/rf.c
@@ -15,7 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "user_kb.h"
+#include "kb_util.h"
 #include "uart.h" // qmk uart.h
 #include "ansi.h"
 #include "rf_driver.h"
@@ -146,7 +146,7 @@ void uart_send_report_repeat(void)
             wait_us(200);
 
             if(f_bit_kb_act)
-            uart_send_report(CMD_RPT_BIT_KB, uart_bit_report_buf, 16);
+                uart_send_report(CMD_RPT_BIT_KB, uart_bit_report_buf, 16);
         }
         else {
             f_bit_kb_act = 0;
@@ -256,11 +256,11 @@ void RF_Protocol_Receive(void) {
 
                     dev_info.rf_charge = Usart_Mgr.RXDBuf[7];
 
-                    if (Usart_Mgr.RXDBuf[8] <= 100) dev_info.rf_baterry = Usart_Mgr.RXDBuf[8];
-                    if (dev_info.rf_charge & 0x01) dev_info.rf_baterry = 100;
+                    if (Usart_Mgr.RXDBuf[8] <= 100) dev_info.rf_battery = Usart_Mgr.RXDBuf[8];
+                    if (dev_info.rf_charge & 0x01) dev_info.rf_battery = 100;
                 }
                 else {
-                    if (dev_info.rf_state != RF_INVAILD) {
+                    if (dev_info.rf_state != RF_INVALID) {
                         if (error_cnt >= 5) {
                             error_cnt      = 0;
                             f_send_channel = 1;
@@ -447,9 +447,9 @@ void dev_sts_sync(void) {
     if (f_rf_reset) {
         f_rf_reset = 0;
         wait_ms(100);
-        writePinLow(NRF_RESET_PIN);
+        gpio_write_pin_low(NRF_RESET_PIN);
         wait_ms(50);
-        writePinHigh(NRF_RESET_PIN);
+        gpio_write_pin_high(NRF_RESET_PIN);
         wait_ms(50);
     }
     else if (f_send_channel) {
@@ -506,22 +506,22 @@ void dev_sts_sync(void) {
 /**
  * @brief Uart send bytes.
  * @param Buffer data buf
- * @param Length data lenght
+ * @param Length data length
  */
 void UART_Send_Bytes(uint8_t *Buffer, uint32_t Length) {
-    writePinLow(NRF_WAKEUP_PIN);
+    gpio_write_pin_low(NRF_WAKEUP_PIN);
     wait_us(50);
 
     uart_transmit(Buffer, Length);
 
     wait_us(50 + Length * 30);
-    writePinHigh(NRF_WAKEUP_PIN);
+    gpio_write_pin_high(NRF_WAKEUP_PIN);
 }
 
 /**
  * @brief get checksum.
  * @param buf data buf
- * @param len data lenght
+ * @param len data length
  */
 uint8_t get_checksum(uint8_t *buf, uint8_t len) {
     uint8_t i;
@@ -560,7 +560,7 @@ void uart_send_report(uint8_t report_type, uint8_t *report_buf, uint8_t report_s
 }
 
 /**
- * @brief Uart receives data and processes it after completion,.
+ * @brief Uart receives data and processes it after completion.
  */
 void uart_receive_pro(void) {
     static bool rcv_start = false;

diff --git a/keyboards/nuphy/air75_v2/ansi/rf_driver.c b/keyboards/nuphy/air75_v2/ansi/rf_driver.c
@@ -18,7 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "host_driver.h"
 #include "rf_driver.h"
 #include "host.h"
-#include "user_kb.h"
+#include "kb_util.h"
 
 /* Variable declaration */
 extern DEV_INFO_STRUCT dev_info;

diff --git a/keyboards/nuphy/air75_v2/ansi/rules.mk b/keyboards/nuphy/air75_v2/ansi/rules.mk
@@ -1,3 +1,3 @@
-SRC += side.c rf.c sleep.c rf_driver.c user_kb.c side_driver.c
+SRC += side.c rf.c sleep.c rf_driver.c kb_util.c side_driver.c
 
 UART_DRIVER_REQUIRED = yes