Add initial Eco keymap

keyboards/eco/keymaps/bcat/config.h

@@ -0,0 +1,6 @@
+#pragma once
+
+/* WS2812B RGB LED strip hand wired to Elite-C. */
+#define RGB_DI_PIN B7
+#define RGBLED_NUM 15
+#define RGBLIGHT_ANIMATIONS

keyboards/eco/keymaps/bcat/keymap.c

@@ -0,0 +1,56 @@
+#include QMK_KEYBOARD_H
+
+#include "bcat.h"
+
+enum layer {
+    LAYER_DEFAULT,
+    LAYER_LOWER,
+    LAYER_RAISE,
+    LAYER_ADJUST,
+};
+
+#define LY_LWR MO(LAYER_LOWER)
+#define LY_RSE MO(LAYER_RAISE)
+
+#define KY_CSPC LCTL(KC_SPC)
+#define KY_ZMIN LCTL(KC_EQL)
+#define KY_ZMOUT LCTL(KC_MINS)
+#define KY_ZMRST LCTL(KC_0)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Default layer: http://www.keyboard-layout-editor.com/#/gists/2c11371c7a5f7cd08a0132631d3d3281 */
+    [LAYER_DEFAULT] = LAYOUT(
+        KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_LBRC,  KC_RBRC,  KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_BSPC,
+        KC_ESC,   KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_HOME,  KC_PGUP,  KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,
+        KC_LSFT,  KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_END,   KC_PGDN,  KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,
+        XXXXXXX,  XXXXXXX,  KC_LALT,  KC_LCTL,  LY_LWR,   KC_SPC,   XXXXXXX,  XXXXXXX,  KC_ENT,   LY_RSE,   KC_RALT,  KC_RGUI,  XXXXXXX,  XXXXXXX
+    ),
+
+    /* Lower layer: http://www.keyboard-layout-editor.com/#/gists/11256970dc0552886a82382ee02fa415 */
+    [LAYER_LOWER] = LAYOUT(
+        MC_ALTT,  KC_EXLM,  KC_AT,    KC_HASH,  KC_DLR,   KC_PERC,  _______,  _______,  KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,  KC_RPRN,  _______,
+        KY_CSPC,  KY_ZMRST, KY_ZMOUT, KY_ZMIN,  KC_WBAK,  KC_WFWD,  _______,  _______,  KC_PIPE,  KC_UNDS,  KC_PLUS,  KC_LCBR,  KC_RCBR,  KC_TILD,
+        _______,  KC_APP,   KC_PSCR,  KC_SLCK,  KC_PAUS,  KC_LGUI,  _______,  _______,  KC_BSLS,  KC_MINS,  KC_EQL,   KC_LBRC,  KC_RBRC,  KC_GRV,
+        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
+    ),
+
+    /* Raise layer: http://www.keyboard-layout-editor.com/#/gists/308a8be75e0b85902dc18db1b2546862 */
+    [LAYER_RAISE] = LAYOUT(
+        KC_CAPS,  KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     _______,  _______,  KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     _______,
+        _______,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    _______,  _______,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  KC_F11,   KC_DEL,
+        _______,  KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   _______,  _______,  KC_HOME,  KC_PGDN,  KC_PGUP,  KC_END,   KC_F12,   KC_INS,
+        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
+    ),
+
+    /* Adjust layer: http://www.keyboard-layout-editor.com/#/gists/b18aafa0327d7e83eaf485546c067a21 */
+    [LAYER_ADJUST] = LAYOUT(
+        _______,  NK_TOGG,  KC_MPLY,  KC_VOLU,  KC_MSTP,  _______,  _______,  _______,  EEP_RST,  RESET,    _______,  _______,  _______,  _______,
+        _______,  _______,  KC_MPRV,  KC_VOLD,  KC_MNXT,  _______,  _______,  _______,  RGB_RMOD, RGB_VAD,  RGB_VAI,  RGB_MOD,  RGB_SPI,  _______,
+        _______,  _______,  _______,  KC_MUTE,  _______,  _______,  _______,  _______,  RGB_HUI,  RGB_SAD,  RGB_SAI,  RGB_HUD,  RGB_SPD,  _______,
+        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  RGB_TOG,  _______,  _______,  _______,  _______,  _______
+    ),
+};
+
+layer_state_t layer_state_set_keymap(layer_state_t state) {
+    return update_tri_layer_state(state, LAYER_LOWER, LAYER_RAISE, LAYER_ADJUST);
+}

keyboards/eco/keymaps/bcat/readme.md

@@ -0,0 +1,44 @@
+# bcat's Eco layout
+
+This is a cute little 4x14 ortholinear keyboard. I've set it up using an
+unsplit, ortho version of my [split 3x6 + 3 thumb
+keys](https://github.com/qmk/qmk_firmware/tree/master/layouts/community/split_3x6_3/bcat)
+(Crkbd) layout, with the following changes:
+
+* The alpha keys are separated by an extra two columns in the middle to provide
+a little more hand separation, similar to a split keyboard.
+
+* The top three rows of the extra middle columns feature navigation keys and
+brackets/braces. I don't really use dedicated keys for these, but I had the
+keycaps, so I figured I may as well put them there.
+
+* I have a Left Alt and Right Super key on the bottom row just like my
+[Lily58](https://github.com/qmk/qmk_firmware/tree/master/keyboards/lily58/keymaps/bcat).
+
+* The two keys in each bottom corner are unbound, as is the 2U spacebar in the
+center of the bottom row. These keys are too inconvenient to reach, and there's
+nothing really useful to bind them to anyway.
+
+## Default layer
+
+![Default layer layout](https://i.imgur.com/uRUT2cY.png)
+
+([KLE](http://www.keyboard-layout-editor.com/#/gists/2c11371c7a5f7cd08a0132631d3d3281))
+
+## Lower layer
+
+![Lower layer layout](https://i.imgur.com/8SR0M9x.png)
+
+([KLE](http://www.keyboard-layout-editor.com/#/gists/11256970dc0552886a82382ee02fa415))
+
+## Raise layer
+
+![Raise layer layout](https://i.imgur.com/U7KERR3.png)
+
+([KLE](http://www.keyboard-layout-editor.com/#/gists/308a8be75e0b85902dc18db1b2546862))
+
+## Adjust layer
+
+![Adjust layer layout](https://i.imgur.com/J2rOshm.png)
+
+([KLE](http://www.keyboard-layout-editor.com/#/gists/b18aafa0327d7e83eaf485546c067a21))

keyboards/eco/keymaps/bcat/rules.mk

@@ -0,0 +1,3 @@
+BOOTLOADER = atmel-dfu  # Elite-C
+
+RGBLIGHT_ENABLE = yes