Migrate Telophase to UART driver

keyboards/telophase/config.h

@@ -72,12 +72,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* disable these deprecated features by default */
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-
-// UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM       \
-    /* enable TX and RX */            \
-    UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
-    /* 8-bit data */                  \
-    UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);

keyboards/telophase/matrix.c

@@ -18,18 +18,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "quantum.h"
 #include "matrix.h"
-#include "protocol/serial.h"
+#include "uart.h"
 
 void matrix_init_custom(void) {
-    serial_init();
+    uart_init(1000000);
 }
 
 bool matrix_scan_custom(matrix_row_t current_matrix[]) {
     uint32_t timeout = 0;
     bool changed = false;
 
     //the s character requests the RF slave to send the matrix
-    SERIAL_UART_DATA = 's';
+    uart_write('s');
 
     //trust the external keystates entirely, erase the last data
     uint8_t uart_data[13] = {0};
@@ -39,13 +39,13 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) {
         //wait for the serial data, timeout if it's been too long
         //this only happened in testing with a loose wire, but does no
         //harm to leave it in here
-        while (!SERIAL_UART_RXD_PRESENT) {
+        while (!uart_available()) {
             timeout++;
             if (timeout > 10000) {
                 break;
             }
         }
-        uart_data[i] = SERIAL_UART_DATA;
+        uart_data[i] = uart_read();
     }
 
     //check for the end packet, the key state bytes use the LSBs, so 0xE0

keyboards/telophase/rules.mk

@@ -19,7 +19,8 @@ AUDIO_ENABLE = no           # Audio output
 CUSTOM_MATRIX = lite
 
 # project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
 
 # Disable unsupported hardware
 RGBLIGHT_SUPPORTED = no