Addition of EC 60X

keyboards/cipulot/ec_60x/config.h

@@ -0,0 +1,71 @@
+/* Copyright 2024 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+#define MATRIX_ROW_PINS \
+    { A8, A15, B12, B8, B9}
+
+#define AMUX_COUNT 1
+#define AMUX_MAX_COLS_COUNT 16
+
+#define AMUX_EN_PINS \
+    { B5 }
+
+#define AMUX_SEL_PINS \
+    { B6, B7, B4, B3 }
+
+#define AMUX_COL_CHANNELS_SIZES \
+    { 15 }
+
+#define AMUX_0_COL_CHANNELS \
+    { 7, 6, 5, 4, 3, 2, 1, 0, 8, 14, 13, 10, 9, 12, 11}
+
+#define AMUX_COL_CHANNELS AMUX_0_COL_CHANNELS
+
+#define DISCHARGE_PIN A2
+#define ANALOG_PORT A3
+
+#define DEFAULT_ACTUATION_MODE 0
+#define DEFAULT_MODE_0_ACTUATION_LEVEL 550
+#define DEFAULT_MODE_0_RELEASE_LEVEL 500
+#define DEFAULT_MODE_1_INITIAL_DEADZONE_OFFSET DEFAULT_MODE_0_ACTUATION_LEVEL
+#define DEFAULT_MODE_1_ACTUATION_OFFSET 70
+#define DEFAULT_MODE_1_RELEASE_OFFSET 70
+#define DEFAULT_EXTREMUM 1023
+#define EXPECTED_NOISE_FLOOR 0
+#define NOISE_FLOOR_THRESHOLD 50
+#define BOTTOMING_CALIBRATION_THRESHOLD 50
+#define DEFAULT_NOISE_FLOOR_SAMPLING_COUNT 30
+#define DEFAULT_BOTTOMING_READING 1023
+#define DEFAULT_CALIBRATION_STARTER true
+
+#define DISCHARGE_TIME 10
+
+// #define DEBUG_MATRIX_SCAN_RATE
+#define EECONFIG_KB_DATA_SIZE 159
+
+// PWM driver with direct memory access (DMA) support
+#define WS2812_PWM_COMPLEMENTARY_OUTPUT
+#define WS2812_PWM_DRIVER PWMD1
+#define WS2812_PWM_CHANNEL 3
+#define WS2812_PWM_PAL_MODE 1
+#define WS2812_DMA_STREAM STM32_DMA2_STREAM5
+#define WS2812_DMA_CHANNEL 6
+#define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM1_UP

keyboards/cipulot/ec_60x/halconf.h

@@ -0,0 +1,23 @@
+/* Copyright 2024 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_ADC TRUE
+#define HAL_USE_PAL TRUE
+#define HAL_USE_PWM TRUE
+
+#include_next <halconf.h>