Add support for AKB boards

keyboards/akb/eb46/config.h

@@ -0,0 +1,52 @@
+/*
+Copyright 2019 Elliot Powell
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x4646
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Elliot Powell
+#define PRODUCT eb46
+#define DESCRIPTION eb46 running qmk
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS \
+  { B5, B4, D7, B6 }
+#define MATRIX_COL_PINS \
+  { B0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D4, D6, C6 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5

keyboards/akb/eb46/eb46.c

@@ -0,0 +1,43 @@
+/* Copyright 2019 Elliot Powell
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "eb46.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/akb/eb46/eb46.h

@@ -0,0 +1,40 @@
+/* Copyright 2019 Elliot Powell
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define xxx KC_NO
+
+#define LAYOUT(\
+  k000, k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b,\
+	k100, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,     \
+	k200, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a,     \
+	k300, k30, k31, k32, k33,           k36,      k38, k39, k3a     \
+) \
+{ \
+  {k000, k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b},\
+	{k100, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, xxx},\
+	{k200, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, xxx},\
+	{k300, k30, k31, k32, k33, xxx, xxx, k36, xxx, k38, k39, k3a, xxx} \
+}

keyboards/akb/eb46/info.json

@@ -0,0 +1,55 @@
+{
+    "keyboard_name": "eb46",
+    "maintainer": "e11i0t23",
+    "width": 12,
+    "hight": 4,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                { "x": 0, "y": 0 },
+                { "x": 1, "y": 0 },
+                { "x": 2, "y": 0 },
+                { "x": 3, "y": 0 },
+                { "x": 4, "y": 0 },
+                { "x": 5, "y": 0 },
+                { "x": 6, "y": 0 },
+                { "x": 7, "y": 0 },
+                { "x": 8, "y": 0 },
+                { "x": 9, "y": 0 },
+                { "x": 10, "y": 0 },
+                { "x": 11, "y": 0 },
+                { "x": 0, "y": 1, "w": 1.25 },
+                { "x": 1.25, "y": 1 },
+                { "x": 2.25, "y": 1 },
+                { "x": 3.25, "y": 1 },
+                { "x": 4.25, "y": 1 },
+                { "x": 5.25, "y": 1 },
+                { "x": 6.25, "y": 1 },
+                { "x": 7.25, "y": 1 },
+                { "x": 8.25, "y": 1 },
+                { "x": 9.25, "y": 1 },
+                { "x": 10.25, "y": 1, "w": 1.75 },
+                { "x": 0, "y": 2, "w": 1.75 },
+                { "x": 1.75, "y": 2 },
+                { "x": 2.75, "y": 2 },
+                { "x": 3.75, "y": 2 },
+                { "x": 4.75, "y": 2 },
+                { "x": 5.75, "y": 2 },
+                { "x": 6.75, "y": 2 },
+                { "x": 7.75, "y": 2 },
+                { "x": 8.75, "y": 2 },
+                { "x": 9.75, "y": 2 },
+                { "x": 10.75, "y": 2, "w": 1.25 },
+                { "x": 0, "y": 3 },
+                { "x": 1, "y": 3 },
+                { "x": 2, "y": 3 },
+                { "x": 3, "y": 3, "w": 2.25 },
+                { "x": 5.25, "y": 3, "w": 2.75 },
+                { "x": 8, "y": 3 },
+                { "x": 9, "y": 3 },
+                { "x": 10, "y": 3 },
+                { "x": 11, "y": 3 }
+            ]
+        }
+    }
+}

keyboards/akb/eb46/keymaps/default/keymap.c

@@ -0,0 +1,37 @@
+/* Copyright 2019 Elliot Powell
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( /* Base */\
+  KC_F5,    KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,\
+  KC_PGUP,  KC_TAB,  KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,       KC_ENT, \
+  KC_PGDN,  KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_RSFT,\
+  KC_ESC,   LCTL_T(KC_LBRC), KC_LGUI, KC_LALT,  KC_SPC,  LT(1, KC_SPC), KC_RALT, MO(2), RCTL_T(KC_RBRC) \
+  ),
+  [1] = LAYOUT( /* Base */\
+  KC_TRNS,  KC_TRNS,  KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0,     KC_TRNS,\
+  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_UP,   KC_DOWN, KC_RIGHT,         KC_TRNS,\
+  KC_TRNS,  KC_TRNS,           KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_TRNS,\
+  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS \
+  ),
+  [2] = LAYOUT( /* Base */\
+  KC_TRNS,  KC_F1  ,  KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 ,\
+  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_NUHS,          KC_TRNS,\
+  KC_TRNS,  KC_TRNS,           KC_NUBS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLSH, KC_TRNS, KC_TRNS,\
+  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS,  RESET \
+  ),
+};

keyboards/akb/eb46/readme.md

@@ -0,0 +1,13 @@
+# ep46
+
+EB46: A 40% plus macro keys
+
+Keyboard Maintainer: [Elliot Powell](https://github.com/e11i0t23), [/u/e11i0t23 on reddit](https://reddit.com/u/e11i0t23)  
+Hardware Supported: EB46 PCB  
+Hardware Availability: Coming Soon
+
+Make example for this keyboard (after setting up your build environment):
+
+    make akb/eb46:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/akb/eb46/rules.mk

@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/akb/raine/config.h

@@ -0,0 +1,51 @@
+/*
+Copyright 2019 Elliot Powell
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER AKB
+#define PRODUCT Raine M3
+#define DESCRIPTION Raine M3
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS \
+  { E6, C6, F7, B2, B0 }
+#define MATRIX_COL_PINS \
+  { F6, F5, F4, B1, F1, F0, B3, B7, D0, D1, D2, D3, D5, D4, D6, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE