-
Notifications
You must be signed in to change notification settings - Fork 1k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Bump serve-static and express in /cirq-web/cirq_ts #6731
Bump serve-static and express in /cirq-web/cirq_ts #6731
Conversation
Bumps [serve-static](https://github.com/expressjs/serve-static) and [express](https://github.com/expressjs/express). These dependencies needed to be updated together. Updates `serve-static` from 1.15.0 to 1.16.2 - [Release notes](https://github.com/expressjs/serve-static/releases) - [Changelog](https://github.com/expressjs/serve-static/blob/v1.16.2/HISTORY.md) - [Commits](expressjs/serve-static@v1.15.0...v1.16.2) Updates `express` from 4.19.2 to 4.21.0 - [Release notes](https://github.com/expressjs/express/releases) - [Changelog](https://github.com/expressjs/express/blob/4.21.0/History.md) - [Commits](expressjs/express@4.19.2...4.21.0) --- updated-dependencies: - dependency-name: serve-static dependency-type: indirect - dependency-name: express dependency-type: indirect ... Signed-off-by: dependabot[bot] <support@github.com>
Thanks for your pull request! It looks like this may be your first contribution to a Google open source project. Before we can look at your pull request, you'll need to sign a Contributor License Agreement (CLA). View this failed invocation of the CLA check for more information. For the most up to date status, view the checks section at the bottom of the pull request. |
Codecov ReportAll modified and coverable lines are covered by tests ✅
Additional details and impacted files@@ Coverage Diff @@
## main #6731 +/- ##
==========================================
- Coverage 97.83% 97.83% -0.01%
==========================================
Files 1077 1077
Lines 92485 92524 +39
==========================================
+ Hits 90484 90518 +34
- Misses 2001 2006 +5 ☔ View full report in Codecov by Sentry. |
Bumps [serve-static](https://github.com/expressjs/serve-static) and [express](https://github.com/expressjs/express). These dependencies needed to be updated together. Updates `serve-static` from 1.15.0 to 1.16.2 - [Release notes](https://github.com/expressjs/serve-static/releases) - [Changelog](https://github.com/expressjs/serve-static/blob/v1.16.2/HISTORY.md) - [Commits](expressjs/serve-static@v1.15.0...v1.16.2) Updates `express` from 4.19.2 to 4.21.0 - [Release notes](https://github.com/expressjs/express/releases) - [Changelog](https://github.com/expressjs/express/blob/4.21.0/History.md) - [Commits](expressjs/express@4.19.2...4.21.0) --- updated-dependencies: - dependency-name: serve-static dependency-type: indirect - dependency-name: express dependency-type: indirect ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Michael Hucka <mhucka@caltech.edu>
Bumps [serve-static](https://github.com/expressjs/serve-static) and [express](https://github.com/expressjs/express). These dependencies needed to be updated together. Updates `serve-static` from 1.15.0 to 1.16.2 - [Release notes](https://github.com/expressjs/serve-static/releases) - [Changelog](https://github.com/expressjs/serve-static/blob/v1.16.2/HISTORY.md) - [Commits](expressjs/serve-static@v1.15.0...v1.16.2) Updates `express` from 4.19.2 to 4.21.0 - [Release notes](https://github.com/expressjs/express/releases) - [Changelog](https://github.com/expressjs/express/blob/4.21.0/History.md) - [Commits](expressjs/express@4.19.2...4.21.0) --- updated-dependencies: - dependency-name: serve-static dependency-type: indirect - dependency-name: express dependency-type: indirect ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Michael Hucka <mhucka@caltech.edu>
* Explicitly convert NumPy ndarray of np.bool to Python bool In NumPy 2 (and possibly earlier versions), lines 478-480 produced a deprecation warning: ``` DeprecationWarning: In future, it will be an error for 'np.bool' scalars to be interpreted as an index ``` This warning is somewhat misleading: it _is_ the case that Booleans are involved, but they are not being used as indices. The fields `rs`, `xs`, and `zs` of CliffordTableau as defined in file `cirq-core/cirq/qis/clifford_tableau.py` have type `Optional[np.ndarray]`, and the values in the ndarray have NumPy type `bool` in practice. The protocol buffer version of CliffordTableau defined in file `cirq-google/cirq_google/api/v2/program_pb2.pyi` defines those fields as `collections.abc.Iterable[builtins.bool]`. At first blush, you might think they're arrays of Booleans in both cases, but unfortunately, there's a wrinkle: Python defines its built-in `bool` type as being derived from `int` (see PEP 285), while NumPy explicitly does _not_ drive its `bool` from its integer class (see <https://numpy.org/doc/2.0/reference/arrays.scalars.html#numpy.bool>). The warning about converting `np.bool` to index values (i.e., integers) probably arises when the `np.bool` values in the ndarray are coerced into Python Booleans. At first, I thought the obvious solution would be to use `np.asarray` to convert the values to `builtins.bool`, but this did not work: ``` >>> import numpy as np >>> import builtins >>> arr = np.array([True, False], dtype=np.bool) >>> arr array([ True, False]) >>> type(arr[0]) <class 'numpy.bool'> >>> newarr = np.asarray(arr, dtype=builtins.bool) >>> newarr array([ True, False]) >>> type(newarr[0]) <class 'numpy.bool'> ``` They still end up being NumPy bools. Some other variations on this approach all failed to produce proper Python Booleans. In the end, what worked was to use `map()` to apply `builtins.bool` to every value in the incoming arrays. This may not be as efficient as possible; a possible optimization for the future is to look for a more efficient way to cast the types, or avoid having to do it at all. * Avoid a construct deprecated in NumPy 2 The NumPy 2 Migration Guide [explicitly recommends changing](https://numpy.org/doc/stable/numpy_2_0_migration_guide.html#adapting-to-changes-in-the-copy-keyword) constructs of the form ```python np.array(state, copy=False) ``` to ```python np.asarray(state) ``` * Avoid implicitly converting 2-D arrays of single value to scalars NumPy 2 raises deprecation warnings about converting an ndarray with dimension > 0 of values likle `[[0]]` to a scalar value like `0`. The solution is to get the value using `.item()`. * Add pytest option --warn-numpy-data-promotion This adds a new option to make NumPy warn about data promotion behavior that has changed in NumPy 2. This new promotion can lead to lower precision results when working with floating-point scalars, and errors or overflows when working with integer scalars. Invoking pytest with `--warn-numpy-data-promotion` will cause warnings warnings to be emitted when dissimilar data types are used in an operation in such a way that NumPy ends up changing the data type of the result value. Although this new option for Cirq's pytest code is most useful during Cirq's migration to NumPy 2, the flag will likely remain for some time afterwards too, because developers will undoubtely need time to adjust to the new NumPy behavior. For more information about the NumPy warning enabled by this option, see <https://numpy.org/doc/2.0/numpy_2_0_migration_guide.html#changes-to-numpy-data-type-promotion>. * Update requirements to use NumPy 2 This updates the minimum NumPy version requirement to 2.0, and updates a few other packages to versions that are compatible with NumPy 2.0. Note: NumPy 2.1 was released 3 weeks ago, but at this time, Cirq can only upgrade to 2.0. This is due to the facts that (a) Google's internal codebase is moving to NumPy 2.0.2, and not 2.1 yet; and (b) conflicts arise with some other packages used by Cirq if NumPy 2.1 is required right now. These considerations will no doubt change in the near future, at which time we can update Cirq to use NumPy 2.1 or higher. * Address NumPy 2 data type promotion warnings One of the changes in NumPy 2 is to the [behavior of type promotion](https://numpy.org/devdocs/numpy_2_0_migration_guide.html#changes-to-numpy-data-type-promotion). A possible negative impact of the changes is that some operations involving scalar types can lead to lower precision, or even overflow. For example, `uint8(100) + 200` previously (in Numpy < 2.0) produced a `unit16` value, but now results in a `unit8` value and an overflow _warning_ (not error). This can have an impact on Cirq. For example, in Cirq, simulator measurement result values are `uint8`'s, and in some places, arrays of values are summed; this leads to overflows if the sum > 128. It would not be appropriate to change measurement values to be larger than `uint8`, so in cases like this, the proper solution is probably to make sure that where values are summed or otherwise numerically manipulated, `uint16` or larger values are ensured. NumPy 2 offers a new option (`np._set_promotion_state("weak_and_warn")`) to produce warnings where data types are changed. Commit 6cf50eb adds a new command-line to our pytest framework, such that running ```bash check/pytest --warn-numpy-data-promotion ``` will turn on this NumPy setting. Running `check/pytest` with this option enabled revealed quite a lot of warnings. The present commit changes code in places where those warnings were raised, in an effort to eliminate as many of them as possible. It is certainly the case that not all of the type promotion warnings are meaningful. Unfortunately, I found it sometimes difficult to be sure of which ones _are_ meaningful, in part because Cirq's code has many layers and uses ndarrays a lot, and understanding the impact of a type demotion (say, from `float64` to `float32`) was difficult for me to do. In view of this, I wanted to err on the side of caution and try to avoid losses of precision. The principles followed in the changes are roughly the following: * Don't worry about warnings about changes from `complex64` to `complex128`, as this obviously does not reduce precision. * If a warning involves an operation using an ndarray, change the code to try to get the actual data type of the data elements in the array rather than use a specific data type. This is the reason some of the changes look like the following, where it reaches into an ndarray to get the dtype of an element and then later uses the `.type()` method of that dtype to cast the value of something else: ```python dtype = args.target_tensor.flat[0].dtype ..... args.target_tensor[subspace] *= dtype.type(x) ``` * In cases where the above was not possible, or where it was obvious what the type must always be, the changes add type casts with explicit types like `complex(x)` or `np.float64(x)`. It is likely that this approach resulted in some unnecessary up-promotion of values and may have impacted run-time performance. Some simple overall timing of `check/pytest` did not reveal a glaring negative impact of the changes, but that doesn't mean real applications won't be impacted. Perhaps a future review can evaluate whether speedups are possible. * NumPy 2 data promotion + minor refactoring This commit for one file implements a minor refactoring of 3 test functions to make them all use similar idioms (for greater ease of reading) and to address the same NumPy 2 data promotion warnings for the remaining files in commit eeeabef. * Adjust dtypes per mypy warnings Mypy flagged a couple of the previous data type declaration changes as being incompatible with expected types. Changing them to satisfy mypy did not affect Numpy data type promotion warnings. * Fix Rigetti check for Aspen family device kind (#6734) * Sync with new API for checking device family in qcs-sdk-python, Ref: rigetti/qcs-sdk-rust#463 in isa.pyi * Require qcs-sdk-python-0.20.1 which introduced the new family API Fixes #6732 * Adjustment for mypy: change 2 places where types are declared Pytest was happy with the previous approach to declaring the value types in a couple of expressions, but mypy was not. This new version satisfies both. * Avoid getting NumPy dtypes in printed (string) scalar values As a consequence of [NEP 51](https://numpy.org/neps/nep-0051-scalar-representation.html#nep51), the string representation of scalar numbers changed in NumPy 2 to include type information. This affected printing Cirq circuit diagrams: instead seeing numbers like 1.5, you would see `np.float64(1.5)` and similar. The solution is to avoid getting the repr output of NumPy scalars directly, and instead doing `.item()` on them before passing them to `format()` or other string-producing functions. * Don't force Numpy 2; maintain compatibility with 1 The recent changes support NumPy 2 (as long as cirq-rigetti is removed manually), but they don't require NumPy 2. We can maintain compatibility with Numpy 1.x. * Bump serve-static and express in /cirq-web/cirq_ts (#6731) Bumps [serve-static](https://github.com/expressjs/serve-static) and [express](https://github.com/expressjs/express). These dependencies needed to be updated together. Updates `serve-static` from 1.15.0 to 1.16.2 - [Release notes](https://github.com/expressjs/serve-static/releases) - [Changelog](https://github.com/expressjs/serve-static/blob/v1.16.2/HISTORY.md) - [Commits](expressjs/serve-static@v1.15.0...v1.16.2) Updates `express` from 4.19.2 to 4.21.0 - [Release notes](https://github.com/expressjs/express/releases) - [Changelog](https://github.com/expressjs/express/blob/4.21.0/History.md) - [Commits](expressjs/express@4.19.2...4.21.0) --- updated-dependencies: - dependency-name: serve-static dependency-type: indirect - dependency-name: express dependency-type: indirect ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Michael Hucka <mhucka@caltech.edu> * Silence pytest warnings about asyncio fixture scope In the current version of pytest (8.3.3) with the pytest-asyncio module version 0.24.0, we see the following warnings at the beginning of a pytest run: ``` warnings.warn(PytestDeprecationWarning(_DEFAULT_FIXTURE_LOOP_SCOPE_UNSET)) ..../lib/python3.10/site-packages/pytest_asyncio/plugin.py:208: PytestDeprecationWarning: The configuration option "asyncio_default_fixture_loop_scope" is unset. The event loop scope for asynchronous fixtures will default to the fixture caching scope. Future versions of pytest-asyncio will default the loop scope for asynchronous fixtures to function scope. Set the default fixture loop scope explicitly in order to avoid unexpected behavior in the future. Valid fixture loop scopes are: "function", "class", "module", "package", "session" ``` A [currently-open issue and discussion over in the pytest-asyncio repo](pytest-dev/pytest-asyncio#924) suggests that this is an undesired side-effect of a recent change in pytest-asyncio and is not actually a significant warning. Moreover, the discussion suggests the warning will be removed or changed in the future. In the meantime, the warning is confusing because it makes it sound like something is wrong. This simple PR silences the warning by adding a suitable pytest init flag to `pyproject.toml'. * Fix wrong number of arguments to reshape() Flagged by pylint. * Fix formatting issues flagged by check/format-incremental * Add coverage tests for changes in format_real() * Remove import of kahypar after all In commit eb98361 I added the import of kahypar, which (at least at the time) appeared to have been imported by Quimb. Double-checking this import in clean environments reveals that in fact, nothing depends on kahypar. Taking it out via a separate commit because right now this package is causing our GitHub actions for commit checks to fail, and I want to leave a record of what caused the failures and how they were resolved. * Simplify proper_repr * No need to use bool from builtins * Restore numpy casting to the state as in main * Fix failing test_run_repetitions_terminal_measurement_stochastic Instead of summing int8 ones count them. * Simplify CircuitDiagramInfoArgs.format_radians Handle np2 numeric types without outputting their dtype. * `.item()` already collapses dimensions and converts to int * Exclude cirq_rigetti from json_serialization_test when using numpy-2 This also enables the hash_from_pickle_test.py with numpy-2. * pytest - apply warn_numpy_data_promotion option before test collection * Add temporary requirements file for NumPy-2.0 * Adjust requirements for cirq-core * allow numpy-1.24 which is still in the NEP-29 support window per https://numpy.org/neps/nep-0029-deprecation_policy.html * require `scipy~=1.8` as scipy-1.8 is the first version that has wheels for Python 3.10 --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: Pavol Juhas <juhas@google.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps serve-static and express. These dependencies needed to be updated together.
Updates
serve-static
from 1.15.0 to 1.16.2Release notes
Sourced from serve-static's releases.
Changelog
Sourced from serve-static's changelog.
Commits
ec9c5ec
1.16.2f454d37
fix(deps): encodeurl@~2.0.077a8255
1.16.14263f49
fix(deps): send@0.19.048c7397
1.16.00c11fad
Merge commit from forkMaintainer changes
This version was pushed to npm by wesleytodd, a new releaser for serve-static since your current version.
Updates
express
from 4.19.2 to 4.21.0Release notes
Sourced from express's releases.
... (truncated)
Changelog
Sourced from express's changelog.
Commits
7e562c6
4.21.01bcde96
fix(deps): qs@6.13.0 (#5946)7d36477
fix(deps): serve-static@1.16.2 (#5951)40d2d8f
fix(deps): finalhandler@1.3.177ada90
Deprecate"back"
magic string in redirects (#5935)21df421
4.20.04c9ddc1
feat: upgrade to serve-static@0.16.09ebe5d5
feat: upgrade to send@0.19.0 (#5928)ec4a01b
feat: upgrade to body-parser@1.20.3 (#5926)54271f6
fix: don't render redirect values in anchor hrefDependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting
@dependabot rebase
.Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR:
@dependabot rebase
will rebase this PR@dependabot recreate
will recreate this PR, overwriting any edits that have been made to it@dependabot merge
will merge this PR after your CI passes on it@dependabot squash and merge
will squash and merge this PR after your CI passes on it@dependabot cancel merge
will cancel a previously requested merge and block automerging@dependabot reopen
will reopen this PR if it is closed@dependabot close
will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually@dependabot show <dependency name> ignore conditions
will show all of the ignore conditions of the specified dependency@dependabot ignore this major version
will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)@dependabot ignore this minor version
will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)@dependabot ignore this dependency
will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)You can disable automated security fix PRs for this repo from the Security Alerts page.