Skip to content

[Legacy] Async, streaming plaintext TCP/IP and secure TLS based connections for ReactPHP.

License

Notifications You must be signed in to change notification settings

reactphp-legacy/socket-client

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Maintenance Mode

This component has now been merged into the Socket component and only exists for BC reasons.

$ composer require react/socket

If you've previously used the SocketClient component to establish outgoing client connections, upgrading should take no longer than a few minutes. All classes have been merged as-is from the latest v0.7.0 release with no other changes, so you can simply update your code to use the updated namespace like this:

// old from SocketClient component and namespace
$connector = new React\SocketClient\Connector($loop);
$connector->connect('google.com:80')->then(function (ConnectionInterface $conn) {
    $connection->write('…');
});

// new
$connector = new React\Socket\Connector($loop);
$connector->connect('google.com:80')->then(function (ConnectionInterface $conn) {
    $connection->write('…');
});

See https://github.com/reactphp/socket for more details.

The below documentation applies to the last release of this component. Further development will take place in the updated Socket component, so you're highly recommended to upgrade as soon as possible.

Legacy SocketClient Component

Build Status Code Climate

Async, streaming plaintext TCP/IP and secure TLS based connections for ReactPHP

You can think of this library as an async version of fsockopen() or stream_socket_client(). If you want to transmit and receive data to/from a remote server, you first have to establish a connection to the remote end. Establishing this connection through the internet/network may take some time as it requires several steps (such as resolving target hostname, completing TCP/IP handshake and enabling TLS) in order to complete. This component provides an async version of all this so you can establish and handle multiple connections without blocking.

Table of Contents

Usage

ConnectorInterface

The ConnectorInterface is responsible for providing an interface for establishing streaming connections, such as a normal TCP/IP connection.

This is the main interface defined in this package and it is used throughout React's vast ecosystem.

Most higher-level components (such as HTTP, database or other networking service clients) accept an instance implementing this interface to create their TCP/IP connection to the underlying networking service. This is usually done via dependency injection, so it's fairly simple to actually swap this implementation against any other implementation of this interface.

The interface only offers a single method:

connect()

The connect(string $uri): PromiseInterface<ConnectionInterface, Exception> method can be used to create a streaming connection to the given remote address.

It returns a Promise which either fulfills with a stream implementing ConnectionInterface on success or rejects with an Exception if the connection is not successful:

$connector->connect('google.com:443')->then(
    function (ConnectionInterface $connection) {
        // connection successfully established
    },
    function (Exception $error) {
        // failed to connect due to $error
    }
);

See also ConnectionInterface for more details.

The returned Promise MUST be implemented in such a way that it can be cancelled when it is still pending. Cancelling a pending promise MUST reject its value with an Exception. It SHOULD clean up any underlying resources and references as applicable:

$promise = $connector->connect($uri);

$promise->cancel();

ConnectionInterface

The ConnectionInterface is used to represent any outgoing connection, such as a normal TCP/IP connection.

An outgoing connection is a duplex stream (both readable and writable) that implements React's DuplexStreamInterface. It contains additional properties for the local and remote address where this connection has been established to.

Most commonly, instances implementing this ConnectionInterface are returned by all classes implementing the ConnectorInterface.

Note that this interface is only to be used to represent the client-side end of an outgoing connection. It MUST NOT be used to represent an incoming connection in a server-side context. If you want to accept incoming connections, use the Socket component instead.

Because the ConnectionInterface implements the underlying DuplexStreamInterface you can use any of its events and methods as usual:

$connection->on('data', function ($chunk) {
    echo $chunk;
});

$connection->on('end', function () {
    echo 'ended';
});

$connection->on('error', function (Exception $e) {
    echo 'error: ' . $e->getMessage();
});

$connection->on('close', function () {
    echo 'closed';
});

$connection->write($data);
$connection->end($data = null);
$connection->close();
// …

For more details, see the DuplexStreamInterface.

getRemoteAddress()

The getRemoteAddress(): ?string method can be used to return the remote address (IP and port) where this connection has been established to.

$address = $connection->getRemoteAddress();
echo 'Connected to ' . $address . PHP_EOL;

If the remote address can not be determined or is unknown at this time (such as after the connection has been closed), it MAY return a NULL value instead.

Otherwise, it will return the full remote address as a string value. If this is a TCP/IP based connection and you only want the remote IP, you may use something like this:

$address = $connection->getRemoteAddress();
$ip = trim(parse_url('tcp://' . $address, PHP_URL_HOST), '[]');
echo 'Connected to ' . $ip . PHP_EOL;

getLocalAddress()

The getLocalAddress(): ?string method can be used to return the full local address (IP and port) where this connection has been established from.

$address = $connection->getLocalAddress();
echo 'Connected via ' . $address . PHP_EOL;

If the local address can not be determined or is unknown at this time (such as after the connection has been closed), it MAY return a NULL value instead.

Otherwise, it will return the full local address as a string value.

This method complements the getRemoteAddress() method, so they should not be confused.

If your system has multiple interfaces (e.g. a WAN and a LAN interface), you can use this method to find out which interface was actually used for this connection.

Connector

The Connector class is the main class in this package that implements the ConnectorInterface and allows you to create streaming connections.

You can use this connector to create any kind of streaming connections, such as plaintext TCP/IP, secure TLS or local Unix connection streams.

It binds to the main event loop and can be used like this:

$loop = React\EventLoop\Factory::create();
$connector = new Connector($loop);

$connector->connect($uri)->then(function (ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

$loop->run();

In order to create a plaintext TCP/IP connection, you can simply pass a host and port combination like this:

$connector->connect('www.google.com:80')->then(function (ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

If you do no specify a URI scheme in the destination URI, it will assume tcp:// as a default and establish a plaintext TCP/IP connection. Note that TCP/IP connections require a host and port part in the destination URI like above, all other URI components are optional.

In order to create a secure TLS connection, you can use the tls:// URI scheme like this:

$connector->connect('tls://www.google.com:443')->then(function (ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

In order to create a local Unix domain socket connection, you can use the unix:// URI scheme like this:

$connector->connect('unix:///tmp/demo.sock')->then(function (ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

Under the hood, the Connector is implemented as a higher-level facade for the lower-level connectors implemented in this package. This means it also shares all of their features and implementation details. If you want to typehint in your higher-level protocol implementation, you SHOULD use the generic ConnectorInterface instead.

In particular, the Connector class uses Google's public DNS server 8.8.8.8 to resolve all hostnames into underlying IP addresses by default. This implies that it also ignores your hosts file and resolve.conf, which means you won't be able to connect to localhost and other non-public hostnames by default. If you want to use a custom DNS server (such as a local DNS relay), you can set up the Connector like this:

$connector = new Connector($loop, array(
    'dns' => '127.0.1.1'
));

$connector->connect('localhost:80')->then(function (ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

If you do not want to use a DNS resolver at all and want to connect to IP addresses only, you can also set up your Connector like this:

$connector = new Connector($loop, array(
    'dns' => false
));

$connector->connect('127.0.0.1:80')->then(function (ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

Advanced: If you need a custom DNS Resolver instance, you can also set up your Connector like this:

$dnsResolverFactory = new React\Dns\Resolver\Factory();
$resolver = $dnsResolverFactory->createCached('127.0.1.1', $loop);

$connector = new Connector($loop, array(
    'dns' => $resolver
));

$connector->connect('localhost:80')->then(function (ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

By default, the tcp:// and tls:// URI schemes will use timeout value that repects your default_socket_timeout ini setting (which defaults to 60s). If you want a custom timeout value, you can simply pass this like this:

$connector = new Connector($loop, array(
    'timeout' => 10.0
));

Similarly, if you do not want to apply a timeout at all and let the operating system handle this, you can pass a boolean flag like this:

$connector = new Connector($loop, array(
    'timeout' => false
));

By default, the Connector supports the tcp://, tls:// and unix:// URI schemes. If you want to explicitly prohibit any of these, you can simply pass boolean flags like this:

// only allow secure TLS connections
$connector = new Connector($loop, array(
    'tcp' => false,
    'tls' => true,
    'unix' => false,
));

$connector->connect('tls://google.com:443')->then(function (ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

The tcp:// and tls:// also accept additional context options passed to the underlying connectors. If you want to explicitly pass additional context options, you can simply pass arrays of context options like this:

// allow insecure TLS connections
$connector = new Connector($loop, array(
    'tcp' => array(
        'bindto' => '192.168.0.1:0'
    ),
    'tls' => array(
        'verify_peer' => false,
        'verify_peer_name' => false
    ),
));

$connector->connect('tls://localhost:443')->then(function (ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

For more details about context options, please refer to the PHP documentation about socket context options and SSL context options.

Advanced: By default, the Connector supports the tcp://, tls:// and unix:// URI schemes. For this, it sets up the required connector classes automatically. If you want to explicitly pass custom connectors for any of these, you can simply pass an instance implementing the ConnectorInterface like this:

$dnsResolverFactory = new React\Dns\Resolver\Factory();
$resolver = $dnsResolverFactory->createCached('127.0.1.1', $loop);
$tcp = new DnsConnector(new TcpConnector($loop), $resolver);

$tls = new SecureConnector($tcp, $loop);

$unix = new UnixConnector($loop);

$connector = new Connector($loop, array(
    'tcp' => $tcp,
    'tls' => $tls,
    'unix' => $unix,

    'dns' => false,
    'timeout' => false,
));

$connector->connect('google.com:80')->then(function (ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

Internally, the tcp:// connector will always be wrapped by the DNS resolver, unless you disable DNS like in the above example. In this case, the tcp:// connector receives the actual hostname instead of only the resolved IP address and is thus responsible for performing the lookup. Internally, the automatically created tls:// connector will always wrap the underlying tcp:// connector for establishing the underlying plaintext TCP/IP connection before enabling secure TLS mode. If you want to use a custom underlying tcp:// connector for secure TLS connections only, you may explicitly pass a tls:// connector like above instead. Internally, the tcp:// and tls:// connectors will always be wrapped by TimeoutConnector, unless you disable timeouts like in the above example.

Advanced Usage

TcpConnector

The React\SocketClient\TcpConnector class implements the ConnectorInterface and allows you to create plaintext TCP/IP connections to any IP-port-combination:

$tcpConnector = new React\SocketClient\TcpConnector($loop);

$tcpConnector->connect('127.0.0.1:80')->then(function (ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

$loop->run();

See also the first example.

Pending connection attempts can be cancelled by cancelling its pending promise like so:

$promise = $tcpConnector->connect('127.0.0.1:80');

$promise->cancel();

Calling cancel() on a pending promise will close the underlying socket resource, thus cancelling the pending TCP/IP connection, and reject the resulting promise.

You can optionally pass additional socket context options to the constructor like this:

$tcpConnector = new React\SocketClient\TcpConnector($loop, array(
    'bindto' => '192.168.0.1:0'
));

Note that this class only allows you to connect to IP-port-combinations. If the given URI is invalid, does not contain a valid IP address and port or contains any other scheme, it will reject with an InvalidArgumentException:

If the given URI appears to be valid, but connecting to it fails (such as if the remote host rejects the connection etc.), it will reject with a RuntimeException.

If you want to connect to hostname-port-combinations, see also the following chapter.

Advanced usage: Internally, the TcpConnector allocates an empty context resource for each stream resource. If the destination URI contains a hostname query parameter, its value will be used to set up the TLS peer name. This is used by the SecureConnector and DnsConnector to verify the peer name and can also be used if you want a custom TLS peer name.

DnsConnector

The DnsConnector class implements the ConnectorInterface and allows you to create plaintext TCP/IP connections to any hostname-port-combination.

It does so by decorating a given TcpConnector instance so that it first looks up the given domain name via DNS (if applicable) and then establishes the underlying TCP/IP connection to the resolved target IP address.

Make sure to set up your DNS resolver and underlying TCP connector like this:

$dnsResolverFactory = new React\Dns\Resolver\Factory();
$dns = $dnsResolverFactory->createCached('8.8.8.8', $loop);

$dnsConnector = new React\SocketClient\DnsConnector($tcpConnector, $dns);

$dnsConnector->connect('www.google.com:80')->then(function (ConnectionInterface $connection) {
    $connection->write('...');
    $connection->end();
});

$loop->run();

See also the first example.

Pending connection attempts can be cancelled by cancelling its pending promise like so:

$promise = $dnsConnector->connect('www.google.com:80');

$promise->cancel();

Calling cancel() on a pending promise will cancel the underlying DNS lookup and/or the underlying TCP/IP connection and reject the resulting promise.

Advanced usage: Internally, the DnsConnector relies on a Resolver to look up the IP address for the given hostname. It will then replace the hostname in the destination URI with this IP and append a hostname query parameter and pass this updated URI to the underlying connector. The underlying connector is thus responsible for creating a connection to the target IP address, while this query parameter can be used to check the original hostname and is used by the TcpConnector to set up the TLS peer name. If a hostname is given explicitly, this query parameter will not be modified, which can be useful if you want a custom TLS peer name.

SecureConnector

The SecureConnector class implements the ConnectorInterface and allows you to create secure TLS (formerly known as SSL) connections to any hostname-port-combination.

It does so by decorating a given DnsConnector instance so that it first creates a plaintext TCP/IP connection and then enables TLS encryption on this stream.

$secureConnector = new React\SocketClient\SecureConnector($dnsConnector, $loop);

$secureConnector->connect('www.google.com:443')->then(function (ConnectionInterface $connection) {
    $connection->write("GET / HTTP/1.0\r\nHost: www.google.com\r\n\r\n");
    ...
});

$loop->run();

See also the second example.

Pending connection attempts can be cancelled by cancelling its pending promise like so:

$promise = $secureConnector->connect('www.google.com:443');

$promise->cancel();

Calling cancel() on a pending promise will cancel the underlying TCP/IP connection and/or the SSL/TLS negonation and reject the resulting promise.

You can optionally pass additional SSL context options to the constructor like this:

$secureConnector = new React\SocketClient\SecureConnector($dnsConnector, $loop, array(
    'verify_peer' => false,
    'verify_peer_name' => false
));

Advanced usage: Internally, the SecureConnector relies on setting up the required context options on the underlying stream resource. It should therefor be used with a TcpConnector somewhere in the connector stack so that it can allocate an empty context resource for each stream resource and verify the peer name. Failing to do so may result in a TLS peer name mismatch error or some hard to trace race conditions, because all stream resources will use a single, shared default context resource otherwise.

TimeoutConnector

The TimeoutConnector class implements the ConnectorInterface and allows you to add timeout handling to any existing connector instance.

It does so by decorating any given ConnectorInterface instance and starting a timer that will automatically reject and abort any underlying connection attempt if it takes too long.

$timeoutConnector = new React\SocketClient\TimeoutConnector($connector, 3.0, $loop);

$timeoutConnector->connect('google.com:80')->then(function (ConnectionInterface $connection) {
    // connection succeeded within 3.0 seconds
});

See also any of the examples.

Pending connection attempts can be cancelled by cancelling its pending promise like so:

$promise = $timeoutConnector->connect('google.com:80');

$promise->cancel();

Calling cancel() on a pending promise will cancel the underlying connection attempt, abort the timer and reject the resulting promise.

UnixConnector

The UnixConnector class implements the ConnectorInterface and allows you to connect to Unix domain socket (UDS) paths like this:

$connector = new React\SocketClient\UnixConnector($loop);

$connector->connect('/tmp/demo.sock')->then(function (ConnectionInterface $connection) {
    $connection->write("HELLO\n");
});

$loop->run();

Connecting to Unix domain sockets is an atomic operation, i.e. its promise will settle (either resolve or reject) immediately. As such, calling cancel() on the resulting promise has no effect.

Install

The recommended way to install this library is through Composer. New to Composer?

This will install the latest supported version:

$ composer require react/socket-client:^0.7

More details about version upgrades can be found in the CHANGELOG.

This project supports running on legacy PHP 5.3 through current PHP 7+ and HHVM. It's highly recommended to use PHP 7+ for this project, partly due to its vast performance improvements and partly because legacy PHP versions require several workarounds as described below.

Secure TLS connections received some major upgrades starting with PHP 5.6, with the defaults now being more secure, while older versions required explicit context options. This library does not take responsibility over these context options, so it's up to consumers of this library to take care of setting appropriate context options as described above.

All versions of PHP prior to 5.6.8 suffered from a buffering issue where reading from a streaming TLS connection could be one data event behind. This library implements a work-around to try to flush the complete incoming data buffers on these versions, but we have seen reports of people saying this could still affect some older versions (5.5.23, 5.6.7, and 5.6.8). Note that this only affects some higher-level streaming protocols, such as IRC over TLS, but should not affect HTTP over TLS (HTTPS). Further investigation of this issue is needed. For more insights, this issue is also covered by our test suite.

This project also supports running on HHVM. Note that really old HHVM < 3.8 does not support secure TLS connections, as it lacks the required stream_socket_enable_crypto() function. As such, trying to create a secure TLS connections on affected versions will return a rejected promise instead. This issue is also covered by our test suite, which will skip related tests on affected versions.

Tests

To run the test suite, you first need to clone this repo and then install all dependencies through Composer:

$ composer install

To run the test suite, go to the project root and run:

$ php vendor/bin/phpunit

License

MIT, see LICENSE file.

About

[Legacy] Async, streaming plaintext TCP/IP and secure TLS based connections for ReactPHP.

Resources

License

Stars

Watchers

Forks

Languages