Skip to content

Commit

Permalink
Add NuttX based targets for RISC-V and ARM
Browse files Browse the repository at this point in the history
Apache NuttX is a real-time operating system (RTOS) with an emphasis on standards compliance and small footprint. It is scalable from 8-bit to 64-bit microcontroller environments. The primary governing standards in NuttX are POSIX and ANSI standards.

NuttX adopts additional standard APIs from Unix and other common RTOSs, such as VxWorks. These APIs are used for functionality not available under the POSIX and ANSI standards. However, some APIs, like fork(), are not appropriate for deeply-embedded environments and are not implemented in NuttX.

For brevity, many parts of the documentation will refer to Apache NuttX as simply NuttX.

I'll be adding libstd support for NuttX in the future, but for now I'll just add the targets.

Tier 3 policy:

> A tier 3 target must have a designated developer or developers (the "target
>  maintainers") on record to be CCed when issues arise regarding the target.
>  (The mechanism to track and CC such developers may evolve over time.)

I will be the target maintainer for this target on matters that pertain to the NuttX part of the triple.
For matters pertaining to the riscv or arm part of the triple, there should be no difference from all other targets. If there are issues, I will address issues regarding the target.

> Targets must use naming consistent with any existing targets; for instance, a
> target for the same CPU or OS as an existing Rust target should use the same
> name for that CPU or OS. Targets should normally use the same names and
> naming conventions as used elsewhere in the broader ecosystem beyond Rust
> (such as in other toolchains), unless they have a very good reason to
> diverge. Changing the name of a target can be highly disruptive, especially
> once the target reaches a higher tier, so getting the name right is important
> even for a tier 3 target.

This is a new supported OS, so I have taken the origin target like `riscv32imac-unknown-none-elf` or `thumbv7m-none-eabi`
and changed the `os` section to `nuttx`.

> Target names should not introduce undue confusion or ambiguity unless
> absolutely necessary to maintain ecosystem compatibility. For example, if
> the name of the target makes people extremely likely to form incorrect
> beliefs about what it targets, the name should be changed or augmented to
> disambiguate it.

I feel that the target name does not introduce any ambiguity.

> Tier 3 targets may have unusual requirements to build or use, but must not
> create legal issues or impose onerous legal terms for the Rust project or for
> Rust developers or users.

The only unusual requirement for building the compiler-builtins crate is a standard RISC-V or ARM C compiler supported by cc-rs, and using this target does not require any additional software beyond what is shipped by rustup.

> The target must not introduce license incompatibilities.

All of the additional code will use Apache-2.0.

> Anything added to the Rust repository must be under the standard Rust
> license (`MIT OR Apache-2.0`).

Agreed, and there is no problem here.

> The target must not cause the Rust tools or libraries built for any other
> host (even when supporting cross-compilation to the target) to depend
> on any new dependency less permissive than the Rust licensing policy. This
> applies whether the dependency is a Rust crate that would require adding
> new license exceptions (as specified by the `tidy` tool in the
> rust-lang/rust repository), or whether the dependency is a native library
> or binary. In other words, the introduction of the target must not cause a
> user installing or running a version of Rust or the Rust tools to be
> subject to any new license requirements.

No new dependencies are added.

> Compiling, linking, and emitting functional binaries, libraries, or other
> code for the target (whether hosted on the target itself or cross-compiling
> from another target) must not depend on proprietary (non-FOSS) libraries.
> Host tools built for the target itself may depend on the ordinary runtime
> libraries supplied by the platform and commonly used by other applications
> built for the target, but those libraries must not be required for code
> generation for the target; cross-compilation to the target must not require
> such libraries at all. For instance, `rustc` built for the target may
> depend on a common proprietary C runtime library or console output library,
> but must not depend on a proprietary code generation library or code
> optimization library. Rust's license permits such combinations, but the
> Rust project has no interest in maintaining such combinations within the
> scope of Rust itself, even at tier 3.

Linking is performed by rust-lld

> "onerous" here is an intentionally subjective term. At a minimum, "onerous"
> legal/licensing terms include but are *not* limited to: non-disclosure
> requirements, non-compete requirements, contributor license agreements
> (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms,
> requirements conditional on the employer or employment of any particular
> Rust developers, revocable terms, any requirements that create liability
> for the Rust project or its developers or users, or any requirements that
> adversely affect the livelihood or prospects of the Rust project or its
> developers or users.

There are no terms. NuttX is distributed under the Apache 2.0 license.

> Neither this policy nor any decisions made regarding targets shall create any
> binding agreement or estoppel by any party. If any member of an approving
> Rust team serves as one of the maintainers of a target, or has any legal or
> employment requirement (explicit or implicit) that might affect their
> decisions regarding a target, they must recuse themselves from any approval
> decisions regarding the target's tier status, though they may otherwise
> participate in discussions.

I'm not the reviewer here.

> This requirement does not prevent part or all of this policy from being
> cited in an explicit contract or work agreement (e.g. to implement or
> maintain support for a target). This requirement exists to ensure that a
> developer or team responsible for reviewing and approving a target does not
> face any legal threats or obligations that would prevent them from freely
> exercising their judgment in such approval, even if such judgment involves
> subjective matters or goes beyond the letter of these requirements.

Again I'm not the reviewer here.

> Tier 3 targets should attempt to implement as much of the standard libraries
> as possible and appropriate (`core` for most targets, `alloc` for targets
> that can support dynamic memory allocation, `std` for targets with an
> operating system or equivalent layer of system-provided functionality), but
> may leave some code unimplemented (either unavailable or stubbed out as
> appropriate), whether because the target makes it impossible to implement or
> challenging to implement. The authors of pull requests are not obligated to
> avoid calling any portions of the standard library on the basis of a tier 3
> target not implementing those portions.
> The target must provide documentation for the Rust community explaining how
> to build for the target, using cross-compilation if possible. If the target
> supports running binaries, or running tests (even if they do not pass), the
> documentation must explain how to run such binaries or tests for the target,
> using emulation if possible or dedicated hardware if necessary.

Building is described in platform support doc, but libstd is not supported now,
I'll implement it later.

> Tier 3 targets must not impose burden on the authors of pull requests, or
> other developers in the community, to maintain the target. In particular,
> do not post comments (automated or manual) on a PR that derail or suggest a
> block on the PR based on a tier 3 target. Do not send automated messages or
> notifications (via any medium, including via `@`) to a PR author or others
> involved with a PR regarding a tier 3 target, unless they have opted into
> such messages.

Understood.

> Backlinks such as those generated by the issue/PR tracker when linking to
> an issue or PR are not considered a violation of this policy, within
> reason. However, such messages (even on a separate repository) must not
> generate notifications to anyone involved with a PR who has not requested
> such notifications.

Understood.

> Patches adding or updating tier 3 targets must not break any existing tier 2
> or tier 1 target, and must not knowingly break another tier 3 target without
> approval of either the compiler team or the maintainers of the other tier 3
> target.

I believe I didn't break any other target.

> In particular, this may come up when working on closely related targets,
> such as variations of the same architecture with different features. Avoid
> introducing unconditional uses of features that another variation of the
> target may not have; use conditional compilation or runtime detection, as
> appropriate, to let each target run code supported by that target.

I think there are no such problems in this PR.

> Tier 3 targets must be able to produce assembly using at least one of
> rustc's supported backends from any host target. (Having support in a fork
> of the backend is not sufficient, it must be upstream.)

Yes, it use standard RISCV or ARM backend to generate assembly.

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
  • Loading branch information
no1wudi committed Jul 19, 2024
1 parent 8c3a94a commit 768fe13
Show file tree
Hide file tree
Showing 19 changed files with 520 additions and 4 deletions.
13 changes: 13 additions & 0 deletions compiler/rustc_target/src/spec/mod.rs
Original file line number Diff line number Diff line change
Expand Up @@ -1840,6 +1840,19 @@ supported_targets! {

("x86_64-unknown-linux-none", x86_64_unknown_linux_none),

("thumbv6m-nuttx-eabi", thumbv6m_nuttx_eabi),
("thumbv7m-nuttx-eabi", thumbv7m_nuttx_eabi),
("thumbv7em-nuttx-eabi", thumbv7em_nuttx_eabi),
("thumbv7em-nuttx-eabihf", thumbv7em_nuttx_eabihf),
("thumbv8m.base-nuttx-eabi", thumbv8m_base_nuttx_eabi),
("thumbv8m.main-nuttx-eabi", thumbv8m_main_nuttx_eabi),
("thumbv8m.main-nuttx-eabihf", thumbv8m_main_nuttx_eabihf),
("riscv32imc-unknown-nuttx-elf", riscv32imc_unknown_nuttx_elf),
("riscv32imac-unknown-nuttx-elf", riscv32imac_unknown_nuttx_elf),
("riscv32imafc-unknown-nuttx-elf", riscv32imafc_unknown_nuttx_elf),
("riscv64imac-unknown-nuttx-elf", riscv64imac_unknown_nuttx_elf),
("riscv64gc-unknown-nuttx-elf", riscv64gc_unknown_nuttx_elf),

}

/// Cow-Vec-Str: Cow<'static, [Cow<'static, str>]>
Expand Down
Original file line number Diff line number Diff line change
@@ -0,0 +1,29 @@
use crate::spec::{cvs, Cc, LinkerFlavor, Lld, PanicStrategy, RelocModel, Target, TargetOptions};

pub fn target() -> Target {
Target {
data_layout: "e-m:e-p:32:32-i64:64-n32-S128".into(),
llvm_target: "riscv32".into(),
metadata: crate::spec::TargetMetadata {
description: None,
tier: None,
host_tools: None,
std: None,
},
pointer_width: 32,
arch: "riscv32".into(),

options: TargetOptions {
families: cvs!["unix"],
os: "nuttx".into(),
linker_flavor: LinkerFlavor::Gnu(Cc::No, Lld::Yes),
linker: Some("rust-lld".into()),
cpu: "generic-rv32".into(),
max_atomic_width: Some(32),
features: "+m,+a,+c".into(),
panic_strategy: PanicStrategy::Unwind,
relocation_model: RelocModel::Static,
..Default::default()
},
}
}
Original file line number Diff line number Diff line change
@@ -0,0 +1,32 @@
use crate::spec::{cvs, Cc, LinkerFlavor, Lld, PanicStrategy, RelocModel, Target, TargetOptions};

pub fn target() -> Target {
Target {
data_layout: "e-m:e-p:32:32-i64:64-n32-S128".into(),
llvm_target: "riscv32".into(),
metadata: crate::spec::TargetMetadata {
description: None,
tier: None,
host_tools: None,
std: None,
},
pointer_width: 32,
arch: "riscv32".into(),

options: TargetOptions {
families: cvs!["unix"],
os: "nuttx".into(),
linker_flavor: LinkerFlavor::Gnu(Cc::No, Lld::Yes),
linker: Some("rust-lld".into()),
cpu: "generic-rv32".into(),
max_atomic_width: Some(32),
llvm_abiname: "ilp32f".into(),
features: "+m,+a,+c,+f".into(),
panic_strategy: PanicStrategy::Abort,
relocation_model: RelocModel::Static,
emit_debug_gdb_scripts: false,
eh_frame_header: false,
..Default::default()
},
}
}
Original file line number Diff line number Diff line change
@@ -0,0 +1,29 @@
use crate::spec::{cvs, Cc, LinkerFlavor, Lld, PanicStrategy, RelocModel, Target, TargetOptions};

pub fn target() -> Target {
Target {
data_layout: "e-m:e-p:32:32-i64:64-n32-S128".into(),
llvm_target: "riscv32".into(),
metadata: crate::spec::TargetMetadata {
description: None,
tier: None,
host_tools: None,
std: None,
},
pointer_width: 32,
arch: "riscv32".into(),

options: TargetOptions {
families: cvs!["unix"],
os: "nuttx".into(),
linker_flavor: LinkerFlavor::Gnu(Cc::No, Lld::Yes),
linker: Some("rust-lld".into()),
cpu: "generic-rv32".into(),
max_atomic_width: Some(32),
features: "+m,+c".into(),
panic_strategy: PanicStrategy::Unwind,
relocation_model: RelocModel::Static,
..Default::default()
},
}
}
Original file line number Diff line number Diff line change
@@ -0,0 +1,36 @@
use crate::spec::SanitizerSet;
use crate::spec::{cvs, Cc, CodeModel, LinkerFlavor, Lld, PanicStrategy};
use crate::spec::{RelocModel, Target, TargetOptions};

pub fn target() -> Target {
Target {
data_layout: "e-m:e-p:64:64-i64:64-i128:128-n32:64-S128".into(),
metadata: crate::spec::TargetMetadata {
description: None,
tier: None,
host_tools: None,
std: None,
},
llvm_target: "riscv64".into(),
pointer_width: 64,
arch: "riscv64".into(),

options: TargetOptions {
families: cvs!["unix"],
os: "nuttx".into(),
linker_flavor: LinkerFlavor::Gnu(Cc::No, Lld::Yes),
linker: Some("rust-lld".into()),
llvm_abiname: "lp64d".into(),
cpu: "generic-rv64".into(),
max_atomic_width: Some(64),
features: "+m,+a,+f,+d,+c".into(),
panic_strategy: PanicStrategy::Abort,
relocation_model: RelocModel::Static,
code_model: Some(CodeModel::Medium),
emit_debug_gdb_scripts: false,
eh_frame_header: false,
supported_sanitizers: SanitizerSet::KERNELADDRESS,
..Default::default()
},
}
}
Original file line number Diff line number Diff line change
@@ -0,0 +1,36 @@
use crate::spec::SanitizerSet;
use crate::spec::{cvs, Cc, CodeModel, LinkerFlavor, Lld, PanicStrategy};
use crate::spec::{RelocModel, Target, TargetOptions};

pub fn target() -> Target {
Target {
data_layout: "e-m:e-p:64:64-i64:64-i128:128-n32:64-S128".into(),
metadata: crate::spec::TargetMetadata {
description: None,
tier: None,
host_tools: None,
std: None,
},
llvm_target: "riscv64".into(),
pointer_width: 64,
arch: "riscv64".into(),

options: TargetOptions {
families: cvs!["unix"],
os: "nuttx".into(),
linker_flavor: LinkerFlavor::Gnu(Cc::No, Lld::Yes),
linker: Some("rust-lld".into()),
llvm_abiname: "lp64d".into(),
cpu: "generic-rv64".into(),
max_atomic_width: Some(64),
features: "+m,+a,+c".into(),
panic_strategy: PanicStrategy::Abort,
relocation_model: RelocModel::Static,
code_model: Some(CodeModel::Medium),
emit_debug_gdb_scripts: false,
eh_frame_header: false,
supported_sanitizers: SanitizerSet::KERNELADDRESS,
..Default::default()
},
}
}
33 changes: 33 additions & 0 deletions compiler/rustc_target/src/spec/targets/thumbv6m_nuttx_eabi.rs
Original file line number Diff line number Diff line change
@@ -0,0 +1,33 @@
// Targets the Cortex-M0, Cortex-M0+ and Cortex-M1 processors (ARMv6-M architecture)

use crate::spec::{base, cvs, Target, TargetOptions};

pub fn target() -> Target {
Target {
llvm_target: "thumbv6m-none-eabi".into(),
metadata: crate::spec::TargetMetadata {
description: None,
tier: None,
host_tools: None,
std: None,
},
pointer_width: 32,
data_layout: "e-m:e-p:32:32-Fi8-i64:64-v128:64:128-a:0:32-n32-S64".into(),
arch: "arm".into(),

options: TargetOptions {
families: cvs!["unix"],
os: "nuttx".into(),
abi: "eabi".into(),
// The ARMv6-M architecture doesn't support unaligned loads/stores so we disable them
// with +strict-align.
// Also force-enable 32-bit atomics, which allows the use of atomic load/store only.
// The resulting atomics are ABI incompatible with atomics backed by libatomic.
features: "+strict-align,+atomics-32".into(),
// There are no atomic CAS instructions available in the instruction set of the ARMv6-M
// architecture
atomic_cas: false,
..base::thumb::opts()
},
}
}
35 changes: 35 additions & 0 deletions compiler/rustc_target/src/spec/targets/thumbv7em_nuttx_eabi.rs
Original file line number Diff line number Diff line change
@@ -0,0 +1,35 @@
// Targets the Cortex-M4 and Cortex-M7 processors (ARMv7E-M)
//
// This target assumes that the device doesn't have a FPU (Floating Point Unit) and lowers all the
// floating point operations to software routines (intrinsics).
//
// As such, this target uses the "soft" calling convention (ABI) where floating point values are
// passed to/from subroutines via general purpose registers (R0, R1, etc.).
//
// To opt-in to hardware accelerated floating point operations, you can use, for example,
// `-C target-feature=+vfp4` or `-C target-cpu=cortex-m4`.

use crate::spec::{base, cvs, Target, TargetOptions};

pub fn target() -> Target {
Target {
llvm_target: "thumbv7em-none-eabi".into(),
metadata: crate::spec::TargetMetadata {
description: None,
tier: None,
host_tools: None,
std: None,
},
pointer_width: 32,
data_layout: "e-m:e-p:32:32-Fi8-i64:64-v128:64:128-a:0:32-n32-S64".into(),
arch: "arm".into(),

options: TargetOptions {
families: cvs!["unix"],
os: "nuttx".into(),
abi: "eabi".into(),
max_atomic_width: Some(32),
..base::thumb::opts()
},
}
}
43 changes: 43 additions & 0 deletions compiler/rustc_target/src/spec/targets/thumbv7em_nuttx_eabihf.rs
Original file line number Diff line number Diff line change
@@ -0,0 +1,43 @@
// Targets the Cortex-M4F and Cortex-M7F processors (ARMv7E-M)
//
// This target assumes that the device does have a FPU (Floating Point Unit) and lowers all (single
// precision) floating point operations to hardware instructions.
//
// Additionally, this target uses the "hard" floating convention (ABI) where floating point values
// are passed to/from subroutines via FPU registers (S0, S1, D0, D1, etc.).
//
// To opt into double precision hardware support, use the `-C target-feature=+fp64` flag.

use crate::spec::{base, cvs, Target, TargetOptions};

pub fn target() -> Target {
Target {
llvm_target: "thumbv7em-none-eabihf".into(),
metadata: crate::spec::TargetMetadata {
description: None,
tier: None,
host_tools: None,
std: None,
},
pointer_width: 32,
data_layout: "e-m:e-p:32:32-Fi8-i64:64-v128:64:128-a:0:32-n32-S64".into(),
arch: "arm".into(),

options: TargetOptions {
families: cvs!["unix"],
os: "nuttx".into(),
abi: "eabihf".into(),
// vfp4 is the lowest common denominator between the Cortex-M4F (vfp4) and the
// Cortex-M7 (vfp5).
// Both the Cortex-M4 and the Cortex-M7 only have 16 double-precision registers
// available, and the Cortex-M4 only supports single-precision floating point operations
// whereas in the Cortex-M7 double-precision is optional.
//
// Reference:
// ARMv7-M Architecture Reference Manual - A2.5 The optional floating-point extension
features: "+vfp4d16sp".into(),
max_atomic_width: Some(32),
..base::thumb::opts()
},
}
}
26 changes: 26 additions & 0 deletions compiler/rustc_target/src/spec/targets/thumbv7m_nuttx_eabi.rs
Original file line number Diff line number Diff line change
@@ -0,0 +1,26 @@
// Targets the Cortex-M3 processor (ARMv7-M)

use crate::spec::{base, cvs, Target, TargetOptions};

pub fn target() -> Target {
Target {
llvm_target: "thumbv7m-none-eabi".into(),
metadata: crate::spec::TargetMetadata {
description: None,
tier: None,
host_tools: None,
std: None,
},
pointer_width: 32,
data_layout: "e-m:e-p:32:32-Fi8-i64:64-v128:64:128-a:0:32-n32-S64".into(),
arch: "arm".into(),

options: TargetOptions {
families: cvs!["unix"],
os: "nuttx".into(),
abi: "eabi".into(),
max_atomic_width: Some(32),
..base::thumb::opts()
},
}
}
29 changes: 29 additions & 0 deletions compiler/rustc_target/src/spec/targets/thumbv8m_base_nuttx_eabi.rs
Original file line number Diff line number Diff line change
@@ -0,0 +1,29 @@
// Targets the Cortex-M23 processor (Baseline ARMv8-M)

use crate::spec::{base, cvs, Target, TargetOptions};

pub fn target() -> Target {
Target {
llvm_target: "thumbv8m.base-none-eabi".into(),
metadata: crate::spec::TargetMetadata {
description: None,
tier: None,
host_tools: None,
std: None,
},
pointer_width: 32,
data_layout: "e-m:e-p:32:32-Fi8-i64:64-v128:64:128-a:0:32-n32-S64".into(),
arch: "arm".into(),

options: TargetOptions {
families: cvs!["unix"],
os: "nuttx".into(),
abi: "eabi".into(),
// ARMv8-M baseline doesn't support unaligned loads/stores so we disable them
// with +strict-align.
features: "+strict-align".into(),
max_atomic_width: Some(32),
..base::thumb::opts()
},
}
}
27 changes: 27 additions & 0 deletions compiler/rustc_target/src/spec/targets/thumbv8m_main_nuttx_eabi.rs
Original file line number Diff line number Diff line change
@@ -0,0 +1,27 @@
// Targets the Cortex-M33 processor (Armv8-M Mainline architecture profile),
// without the Floating Point extension.

use crate::spec::{base, cvs, Target, TargetOptions};

pub fn target() -> Target {
Target {
llvm_target: "thumbv8m.main-none-eabi".into(),
metadata: crate::spec::TargetMetadata {
description: None,
tier: None,
host_tools: None,
std: None,
},
pointer_width: 32,
data_layout: "e-m:e-p:32:32-Fi8-i64:64-v128:64:128-a:0:32-n32-S64".into(),
arch: "arm".into(),

options: TargetOptions {
families: cvs!["unix"],
os: "nuttx".into(),
abi: "eabi".into(),
max_atomic_width: Some(32),
..base::thumb::opts()
},
}
}
Loading

0 comments on commit 768fe13

Please sign in to comment.