Rollup of 31 pull requests #52931
Closed
Rollup of 31 pull requests #52931
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This is a sequel to November 2017's rust-lang#46103 / 1a9dc2e. It had been reported (more than once—at least rust-lang#19140, rust-lang#44083, and rust-lang#44565) that the "never used" language was confusing for enum variants that were "used" as match patterns, so the wording was changed to say never "constructed" specifically for enum variants. More recently, the same issue was raised for structs (rust-lang#52325). It seems consistent to say "constructed" here, too, for the same reasons. We considered using more specific word "called" for unused functions and methods (while we declined to do this in rust-lang#46103, the rationale given in the commit message doesn't actually make sense), but it turns out that Cargo's test suite expects the "never used" message, and maybe we don't care enough even to make a Cargo PR over such a petty and subjective wording change. This resolves rust-lang#52325.
Refer instead to thanks page.
…ler and port libstd to it. As a start, the port uses the simplest possible configuration (no jemalloc, abort on panic) and makes use of existing Unix-specific code wherever possible. It adds targets for x86_64 (current main HermitCore platform) and aarch64 (HermitCore platform under development). Together with the patches to "liblibc" and "llvm", this enables HermitCore applications to be written in Rust.
Recent changes to lints disallowed lints from being emitted against code located in foreign macros, except for future-incompatible lints. For a future incompatible lint, however, the automatic suggestions may not be applicable! This commit updates this code path to force all applicability suggestions made to foreign macros to never be `MachineApplicable`. This should avoid rustfix actually attempting fixing these suggestions, causing non-compiling code to be produced. Closes rust-lang/cargo#5799
Its former contents are now in libcore.
…ark-Simulacrum Add timeout to use of `curl` in bootstrap.py. Recently we've seen a lot of "30 minutes no output" spurious errors while downloading the bootstrap compiler. This added several timeout options so if the "30 minutes no output" errors were caused by connection or transfer issue, we could fail quicker for curl to retry.
Make the tool_lints actually usable cc rust-lang#44690 Necessary for rust-lang/rust-clippy#2955 and rust-lang/rust-clippy#2977 This PR makes it possible for lint tools (at the moment only for Clippy) to implement the `tool_lints`, like it was documented in rust-lang#52018. Because the `declare_lint` macro is pretty cluttered right now, there was not really a good way to add the `tool_name` as an additional argument of the macro. That's why I chose to introduce the new `declare_tool_lint` macro. The switch from `&str` to `String` in the `lint_groups` `FxHashMap` is because I got weird error messages in the `check_lint_name` method. And the `by_name` field of the `LintStore` also uses `String`. ### What comes with this PR: If this PR lands and Clippy switches to the `tool_lints`, the currently used methods ```rust #[cfg_attr(feature = "cargo-clippy", allow(clippy_lint))] #[allow(unknown_lints, clippy_lint)] ``` to `allow`/`warn`/`deny`/`forbid` Clippy lints, won't have any effects anymore, but also won't produce a warning. That is because the name of `clippy_lint` will then be `clippy::clippy_lint`. (Maybe we can add a clippy lint to search for `cfg_attr` appearances with the `cargo-clippy` feature?) r? @oli-obk
…hton Improve bootstrap help on stages Cc @eddyb
…-Simulacrum Use Vec::extend in SmallVec::extend when applicable As calculated in rust-lang#52738, `Vec::extend` is much faster than `push`ing to it in a loop. We can take advantage of this method in `SmallVec` too - at least in cases when its underlying object is an `AccumulateVec::Heap`. ~~This approach also accidentally improves the `push` loop of the `AccumulateVec::Array` variant, because it doesn't utilize `SmallVec::push` which performs `self.reserve(1)` with every iteration; this is unnecessary, because we're already reserving the whole space we will be needing by performing `self.reserve(iter.size_hint().0)` at the beginning.~~
Add targets for HermitCore (https://hermitcore.org) to the Rust compiler and port libstd to it. As a start, the port uses the simplest possible configuration (no jemalloc, abort on panic) and makes use of existing Unix-specific code wherever possible. It adds targets for x86_64 (current main HermitCore platform) and aarch64 (HermitCore platform under development). Together with the patches to "liblibc" (rust-lang/libc#1048) and llvm (rust-lang/llvm#122), this enables HermitCore applications to be written in Rust.
…Simulacrum releases.md: fix 2 typos
Implement Unpin for FutureObj and LocalFutureObj cc @MajorBreakfast r? @aturon
run-pass/const-endianness: negate before to_le() `const LE_I128` needs parentheses to negate the value *before* calling `to_le()`, otherwise it doesn't match the operations performed in the black-boxed part of the test. This only makes a tangible difference on big-endian targets.
Fix wrong issue number in the test name I made a mistake in previous PR rust-lang#52620, second issue number was wrong, changing from rust-lang#52133 to rust-lang#52113 r? @kennytm
Include lifetime in mutability suggestion in NLL messages Fix rust-lang#52880.
…r=petrochenkov NLL: sort diagnostics by span Sorting the output diagnostics by span is a long planned revision to the NLL diagnostics that we hope will yield a less surprising user experience in some case. Once we got them buffered, it was trivial to implement. (The hard part is skimming the resulting changes to the diagnostics to make sure nothing broke... Note that I largely rubber-stamped the `#[rustc_regions]` output change.) Fix rust-lang#51167
Fix a typo in unsize.rs RfC -> RFC
…e-should-precede-suggestions, r=petrochenkov
NLL: On "cannot move out of type" error, print original before rewrite
NLL: On "cannot move out of type" error, print original source before rewrite.
* Arguably this change is sometimes injecting noise into the output (namely in the cases where the suggested rewrite is inline with the suggestion and we end up highlighting the original source code). I would not be opposed to something more aggressive/dynamic, like revising the suggestion code to automatically print the original source when necessary (e.g. when the error does not have a span that includes the span of the suggestion).
* Also, as another note on this change: The doc comment for `Diagnostic::span_suggestion` says:
```rust
/// The message
///
/// * should not end in any punctuation (a `:` is added automatically)
/// * should not be a question
/// * should not contain any parts like "the following", "as shown"
```
* but the `:` is *not* added when the emitted line appears out-of-line relative to the suggestion. I find that to be an unfortunate UI experience.
----
As a drive-by fix, also changed code to combine multiple suggestions for a pattern into a single multipart suggestion (which vastly improves user experience IMO).
----
Includes the updates to expected NLL diagnostics.
Fix rust-lang#52877
…chton Use SetLenOnDrop in Vec::truncate() This avoids a redundant length check in some cases when calling `Vec::truncate` or `Vec::clear`. Fixes rust-lang#51802 Note that the generated code still seems suboptimal. I tested with the following functions: ```rust #[no_mangle] pub extern fn foo(x: &mut Vec<u8>) { x.clear(); } #[no_mangle] pub extern fn bar(x: &mut Vec<u8>) { x.truncate(5); } #[no_mangle] pub extern fn baz(x: &mut Vec<u8>, n: usize) { x.truncate(n); } #[no_mangle] pub extern fn foo_string(x: &mut Vec<String>) { x.clear(); } #[no_mangle] pub extern fn bar_string(x: &mut Vec<String>) { x.truncate(5); } #[no_mangle] pub extern fn baz_string(x: &mut Vec<String>, n: usize) { x.truncate(n); } ``` <details> <summary>Old output</summary> ```asm 00000000000460a0 <foo>: 460a0: 48 83 7f 10 00 cmpq $0x0,0x10(%rdi) 460a5: 74 08 je 460af <foo+0xf> 460a7: 48 c7 47 10 00 00 00 movq $0x0,0x10(%rdi) 460ae: 00 460af: c3 retq 00000000000460b0 <bar>: 460b0: 48 83 7f 10 06 cmpq $0x6,0x10(%rdi) 460b5: 72 08 jb 460bf <bar+0xf> 460b7: 48 c7 47 10 05 00 00 movq $0x5,0x10(%rdi) 460be: 00 460bf: c3 retq 00000000000460c0 <baz>: 460c0: 48 39 77 10 cmp %rsi,0x10(%rdi) 460c4: 76 04 jbe 460ca <baz+0xa> 460c6: 48 89 77 10 mov %rsi,0x10(%rdi) 460ca: c3 retq 460cb: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1) 00000000000460d0 <foo_string>: 460d0: 41 57 push %r15 460d2: 41 56 push %r14 460d4: 53 push %rbx 460d5: 48 8b 47 10 mov 0x10(%rdi),%rax 460d9: 48 85 c0 test %rax,%rax 460dc: 74 4a je 46128 <foo_string+0x58> 460de: 49 89 fe mov %rdi,%r14 460e1: 48 8b 0f mov (%rdi),%rcx 460e4: 48 8d 14 40 lea (%rax,%rax,2),%rdx 460e8: 48 8d 58 ff lea -0x1(%rax),%rbx 460ec: 4c 8d 3c d1 lea (%rcx,%rdx,8),%r15 460f0: 49 83 c7 f0 add $0xfffffffffffffff0,%r15 460f4: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1) 460fb: 00 00 00 460fe: 66 90 xchg %ax,%ax 46100: 49 89 5e 10 mov %rbx,0x10(%r14) 46104: 49 8b 37 mov (%r15),%rsi 46107: 48 85 f6 test %rsi,%rsi 4610a: 74 0e je 4611a <foo_string+0x4a> 4610c: 49 8b 7f f8 mov -0x8(%r15),%rdi 46110: ba 01 00 00 00 mov $0x1,%edx 46115: e8 a6 e9 ff ff callq 44ac0 <__rust_dealloc@plt> 4611a: 48 83 c3 ff add $0xffffffffffffffff,%rbx 4611e: 49 83 c7 e8 add $0xffffffffffffffe8,%r15 46122: 48 83 fb ff cmp $0xffffffffffffffff,%rbx 46126: 75 d8 jne 46100 <foo_string+0x30> 46128: 5b pop %rbx 46129: 41 5e pop %r14 4612b: 41 5f pop %r15 4612d: c3 retq 4612e: 66 90 xchg %ax,%ax 0000000000046130 <bar_string>: 46130: 41 57 push %r15 46132: 41 56 push %r14 46134: 53 push %rbx 46135: 4c 8b 7f 10 mov 0x10(%rdi),%r15 46139: 49 83 ff 06 cmp $0x6,%r15 4613d: 72 49 jb 46188 <bar_string+0x58> 4613f: 49 89 fe mov %rdi,%r14 46142: 48 8b 07 mov (%rdi),%rax 46145: 4b 8d 0c 7f lea (%r15,%r15,2),%rcx 46149: 48 8d 1c c8 lea (%rax,%rcx,8),%rbx 4614d: 48 83 c3 f0 add $0xfffffffffffffff0,%rbx 46151: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1) 46158: 00 00 00 4615b: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1) 46160: 49 83 c7 ff add $0xffffffffffffffff,%r15 46164: 4d 89 7e 10 mov %r15,0x10(%r14) 46168: 48 8b 33 mov (%rbx),%rsi 4616b: 48 85 f6 test %rsi,%rsi 4616e: 74 0e je 4617e <bar_string+0x4e> 46170: 48 8b 7b f8 mov -0x8(%rbx),%rdi 46174: ba 01 00 00 00 mov $0x1,%edx 46179: e8 42 e9 ff ff callq 44ac0 <__rust_dealloc@plt> 4617e: 48 83 c3 e8 add $0xffffffffffffffe8,%rbx 46182: 49 83 ff 05 cmp $0x5,%r15 46186: 77 d8 ja 46160 <bar_string+0x30> 46188: 5b pop %rbx 46189: 41 5e pop %r14 4618b: 41 5f pop %r15 4618d: c3 retq 4618e: 66 90 xchg %ax,%ax 0000000000046190 <baz_string>: 46190: 41 57 push %r15 46192: 41 56 push %r14 46194: 41 54 push %r12 46196: 53 push %rbx 46197: 50 push %rax 46198: 4c 8b 67 10 mov 0x10(%rdi),%r12 4619c: 49 39 f4 cmp %rsi,%r12 4619f: 76 46 jbe 461e7 <baz_string+0x57> 461a1: 49 89 f6 mov %rsi,%r14 461a4: 49 89 ff mov %rdi,%r15 461a7: 48 8b 07 mov (%rdi),%rax 461aa: 4b 8d 0c 64 lea (%r12,%r12,2),%rcx 461ae: 48 8d 1c c8 lea (%rax,%rcx,8),%rbx 461b2: 48 83 c3 f0 add $0xfffffffffffffff0,%rbx 461b6: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1) 461bd: 00 00 00 461c0: 49 83 c4 ff add $0xffffffffffffffff,%r12 461c4: 4d 89 67 10 mov %r12,0x10(%r15) 461c8: 48 8b 33 mov (%rbx),%rsi 461cb: 48 85 f6 test %rsi,%rsi 461ce: 74 0e je 461de <baz_string+0x4e> 461d0: 48 8b 7b f8 mov -0x8(%rbx),%rdi 461d4: ba 01 00 00 00 mov $0x1,%edx 461d9: e8 e2 e8 ff ff callq 44ac0 <__rust_dealloc@plt> 461de: 48 83 c3 e8 add $0xffffffffffffffe8,%rbx 461e2: 4d 39 f4 cmp %r14,%r12 461e5: 77 d9 ja 461c0 <baz_string+0x30> 461e7: 48 83 c4 08 add $0x8,%rsp 461eb: 5b pop %rbx 461ec: 41 5c pop %r12 461ee: 41 5e pop %r14 461f0: 41 5f pop %r15 461f2: c3 retq 461f3: 90 nop 461f4: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1) 461fb: 00 00 00 461fe: 66 90 xchg %ax,%ax ``` </details> <details> <summary>New output</summary> ```asm 0000000000084d10 <foo>: 84d10: 48 c7 47 10 00 00 00 movq $0x0,0x10(%rdi) 84d17: 00 84d18: c3 retq 84d19: 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 0000000000084d20 <bar>: 84d20: 48 8b 47 10 mov 0x10(%rdi),%rax 84d24: 48 83 f8 05 cmp $0x5,%rax 84d28: b9 05 00 00 00 mov $0x5,%ecx 84d2d: 48 0f 42 c8 cmovb %rax,%rcx 84d31: 48 89 4f 10 mov %rcx,0x10(%rdi) 84d35: c3 retq 84d36: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1) 84d3d: 00 00 00 0000000000084d40 <baz>: 84d40: 48 8b 47 10 mov 0x10(%rdi),%rax 84d44: 48 39 f0 cmp %rsi,%rax 84d47: 48 0f 47 c6 cmova %rsi,%rax 84d4b: 48 89 47 10 mov %rax,0x10(%rdi) 84d4f: c3 retq 0000000000084d50 <foo_string>: 84d50: 41 57 push %r15 84d52: 41 56 push %r14 84d54: 53 push %rbx 84d55: 49 89 fe mov %rdi,%r14 84d58: 4c 8b 7f 10 mov 0x10(%rdi),%r15 84d5c: 4d 85 ff test %r15,%r15 84d5f: 74 2f je 84d90 <foo_string+0x40> 84d61: 49 8b 06 mov (%r14),%rax 84d64: 4b 8d 0c 7f lea (%r15,%r15,2),%rcx 84d68: 48 8d 1c c8 lea (%rax,%rcx,8),%rbx 84d6c: 48 83 c3 f0 add $0xfffffffffffffff0,%rbx 84d70: 48 8b 33 mov (%rbx),%rsi 84d73: 48 85 f6 test %rsi,%rsi 84d76: 74 0e je 84d86 <foo_string+0x36> 84d78: 48 8b 7b f8 mov -0x8(%rbx),%rdi 84d7c: ba 01 00 00 00 mov $0x1,%edx 84d81: e8 1a b1 ff ff callq 7fea0 <__rust_dealloc@plt> 84d86: 48 83 c3 e8 add $0xffffffffffffffe8,%rbx 84d8a: 49 83 c7 ff add $0xffffffffffffffff,%r15 84d8e: 75 e0 jne 84d70 <foo_string+0x20> 84d90: 49 c7 46 10 00 00 00 movq $0x0,0x10(%r14) 84d97: 00 84d98: 5b pop %rbx 84d99: 41 5e pop %r14 84d9b: 41 5f pop %r15 84d9d: c3 retq 84d9e: 66 90 xchg %ax,%ax 0000000000084da0 <bar_string>: 84da0: 41 57 push %r15 84da2: 41 56 push %r14 84da4: 53 push %rbx 84da5: 49 89 fe mov %rdi,%r14 84da8: 4c 8b 7f 10 mov 0x10(%rdi),%r15 84dac: 49 83 ff 06 cmp $0x6,%r15 84db0: 72 44 jb 84df6 <bar_string+0x56> 84db2: 49 8b 06 mov (%r14),%rax 84db5: 4b 8d 0c 7f lea (%r15,%r15,2),%rcx 84db9: 48 8d 1c c8 lea (%rax,%rcx,8),%rbx 84dbd: 48 83 c3 f0 add $0xfffffffffffffff0,%rbx 84dc1: 49 83 c7 fb add $0xfffffffffffffffb,%r15 84dc5: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1) 84dcc: 00 00 00 84dcf: 90 nop 84dd0: 48 8b 33 mov (%rbx),%rsi 84dd3: 48 85 f6 test %rsi,%rsi 84dd6: 74 0e je 84de6 <bar_string+0x46> 84dd8: 48 8b 7b f8 mov -0x8(%rbx),%rdi 84ddc: ba 01 00 00 00 mov $0x1,%edx 84de1: e8 ba b0 ff ff callq 7fea0 <__rust_dealloc@plt> 84de6: 48 83 c3 e8 add $0xffffffffffffffe8,%rbx 84dea: 49 83 c7 ff add $0xffffffffffffffff,%r15 84dee: 75 e0 jne 84dd0 <bar_string+0x30> 84df0: 41 bf 05 00 00 00 mov $0x5,%r15d 84df6: 4d 89 7e 10 mov %r15,0x10(%r14) 84dfa: 5b pop %rbx 84dfb: 41 5e pop %r14 84dfd: 41 5f pop %r15 84dff: c3 retq 0000000000084e00 <baz_string>: 84e00: 41 57 push %r15 84e02: 41 56 push %r14 84e04: 41 54 push %r12 84e06: 53 push %rbx 84e07: 50 push %rax 84e08: 49 89 ff mov %rdi,%r15 84e0b: 48 8b 47 10 mov 0x10(%rdi),%rax 84e0f: 49 89 c4 mov %rax,%r12 84e12: 49 29 f4 sub %rsi,%r12 84e15: 76 3c jbe 84e53 <baz_string+0x53> 84e17: 49 89 f6 mov %rsi,%r14 84e1a: 49 8b 0f mov (%r15),%rcx 84e1d: 48 8d 04 40 lea (%rax,%rax,2),%rax 84e21: 48 8d 1c c1 lea (%rcx,%rax,8),%rbx 84e25: 48 83 c3 f0 add $0xfffffffffffffff0,%rbx 84e29: 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 84e30: 48 8b 33 mov (%rbx),%rsi 84e33: 48 85 f6 test %rsi,%rsi 84e36: 74 0e je 84e46 <baz_string+0x46> 84e38: 48 8b 7b f8 mov -0x8(%rbx),%rdi 84e3c: ba 01 00 00 00 mov $0x1,%edx 84e41: e8 5a b0 ff ff callq 7fea0 <__rust_dealloc@plt> 84e46: 48 83 c3 e8 add $0xffffffffffffffe8,%rbx 84e4a: 49 83 c4 ff add $0xffffffffffffffff,%r12 84e4e: 75 e0 jne 84e30 <baz_string+0x30> 84e50: 4c 89 f0 mov %r14,%rax 84e53: 49 89 47 10 mov %rax,0x10(%r15) 84e57: 48 83 c4 08 add $0x8,%rsp 84e5b: 5b pop %rbx 84e5c: 41 5c pop %r12 84e5e: 41 5e pop %r14 84e60: 41 5f pop %r15 84e62: c3 retq 84e63: 90 nop 84e64: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1) 84e6b: 00 00 00 84e6e: 66 90 xchg %ax,%ax ``` </details> For calling `truncate` with non-zero lengths on non-`Drop` types, it seems that a redundant load and comparison gets replaced with an awkward sequence with a conditional move. In the unknown length case, the new code is no longer awkward. Maybe someone moderately proficient at assembly could tell if this looks like a win or not. --- This came up when discussing replacing `unsafe { vec.set_len(0) }` with `vec.clear()` in a project where the author was worried about potential performance degradation. It might be worth replacing some unsafe code, even it it's trivial to see that it's actually safe.
…s, r=alexcrichton Only run the sparc-abi test on sparc It is not required for LLVM to have SPARC target support, so it is necessary to only run this test when LLVM does support SPARC. Sadly, it isn’t possible to specify exactly this constraint. Instead, we specify that this test should run on SPARC host only (it surely is sane assumption to make that compiler running on a SPARC can generate SPARC, right?) Since you cannot specify multiple `only-*` to have it run on both 32-bit and 64-bit SPARC we pick 64-bit SPARC, because it is exactly what is being tested by this test. Fixes rust-lang#52881
…imulacrum Backport 1.27.2 release notes r? @Mark-Simulacrum
Update compatibility note for 1.28.0 to be correct You can still put implementations on `dyn Trait + Send + Send`, but it'd be the same as putting them on `dyn Trait + Send`. This is why the error is that there are duplicate definitions in the example.
|
@bors r+ p=10 |
|
📌 Commit dcb71f0 has been approved by |
bors
added
the
S-waiting-on-bors
bors
added a commit
that referenced
this pull request
Aug 1, 2018
Rollup of 31 pull requests Successful merges: - #52332 (dead-code lint: say "constructed" for structs) - #52340 (Document From trait implementations for OsStr, OsString, CString, and CStr) - #52628 (Cleanup some rustdoc code) - #52732 (Remove unstable and deprecated APIs) - #52745 (Update clippy to latest master) - #52756 (rustc: Disallow machine applicability in foreign macros) - #52771 (Clarify thread::park semantics) - #52810 ([NLL] Don't make "fake" match variables mutable) - #52821 (pretty print for std::collections::vecdeque) - #52822 (Fix From<LocalWaker>) - #52824 (Fix -Wpessimizing-move warnings in rustllvm/PassWrapper) - #52831 (remove references to AUTHORS.txt file) - #52835 (Fix Alias intra doc ICE) - #52842 (update comment) - #52846 (Add timeout to use of `curl` in bootstrap.py.) - #52851 (Make the tool_lints actually usable) - #52853 (Improve bootstrap help on stages) - #52859 (Use Vec::extend in SmallVec::extend when applicable) - #52861 (Add targets for HermitCore (https://hermitcore.org) to the Rust compiler and port libstd to it.) - #52867 (releases.md: fix 2 typos) - #52870 (Implement Unpin for FutureObj and LocalFutureObj) - #52876 (run-pass/const-endianness: negate before to_le()) - #52878 (Fix wrong issue number in the test name) - #52883 (Include lifetime in mutability suggestion in NLL messages) - #52904 (NLL: sort diagnostics by span) - #52905 (Fix a typo in unsize.rs) - #52907 (NLL: On "cannot move out of type" error, print original before rewrite) - #52908 (Use SetLenOnDrop in Vec::truncate()) - #52914 (Only run the sparc-abi test on sparc) - #52918 (Backport 1.27.2 release notes) - #52929 (Update compatibility note for 1.28.0 to be correct) Failed merges: - #52758 (Cleanup for librustc::session) - #52799 (Use BitVector for global sets of AttrId) r? @ghost
|
💔 Test failed - status-appveyor |
bors
added
S-waiting-on-review
|
RLS test failed due to #52332. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Successful merges:
curlin bootstrap.py. #52846 (Add timeout to use ofcurlin bootstrap.py.)Failed merges:
r? @ghost