Skip to content

sparkplug/momoapi-python

Repository files navigation

MTN MoMo API Python Client

Power your apps with our MTN MoMo API

Join our active, engaged community:
Website | Spectrum

Build Status Latest Version Coverage Status Join the community on Spectrum

Usage

Installation

Add the latest version of the library to your project using pip:

 $ pip install mtnmomo

This library supports Python 2.7+ or Python 3.4+ (PyPy supported)

Sandbox Environment

Creating a sandbox environment API user

Next, we need to get the User ID and User Secret and to do this we shall need to use the Primary Key for the Product to which we are subscribed, as well as specify a host. The library ships with a commandline application that helps to create sandbox credentials. It assumes you have created an account on https://momodeveloper.mtn.com and have your Ocp-Apim-Subscription-Key.

## within the project, on the command line. In this example, our domain is akabbo.ug
$ mtnmomo
$ providerCallBackHost: https://akabbo.ug
$ Ocp-Apim-Subscription-Key: f83xx8d8xx6749f19a26e2265aeadbcdeg

The providerCallBackHost is your callback host and Ocp-Apim-Subscription-Key is your API key for the specific product to which you are subscribed. The API Key is unique to the product and you will need an API Key for each product you use. You should get a response similar to the following:

Here is your User Id and API secret : {'apiKey': 'b0431db58a9b41faa8f5860230xxxxxx', 'UserId': '053c6dea-dd68-xxxx-xxxx-c830dac9f401'}

These are the credentials we shall use for the sandbox environment. In production, these credentials are provided for you on the MTN OVA management dashboard after KYC requirements are met.

Configuration

Before we can fully utilize the library, we need to specify global configurations. The global configuration must contain the following:

  • BASE_URL: An optional base url to the MTN Momo API. By default the staging base url will be used
  • ENVIRONMENT: Optional environment, either "sandbox" or "production". Default is 'sandbox'
  • CALLBACK_HOST: The domain where you webhooks urls are hosted. This is mandatory.

Once you have specified the global variables, you can now provide the product-specific variables. Each MoMo API product requires its own authentication details i.e its own Subscription Key, User ID and User Secret, also sometimes refered to as the API Secret. As such, we have to configure subscription keys for each product you will be using.

The full list of configuration options can be seen in the example below:

config = {
   "ENVIRONMENT": os.environ.get("ENVIRONMENT"), 
   "BASE_URL": os.environ.get("BASE_URL"), 
   "CALLBACK_HOST": os.environ.get("CALLBACK_HOST"), # Mandatory.
   "COLLECTION_PRIMARY_KEY": os.environ.get("COLLECTION_PRIMARY_KEY"), 
   "COLLECTION_USER_ID": os.environ.get("COLLECTION_USER_ID"),
   "COLLECTION_API_SECRET": os.environ.get("COLLECTION_API_SECRET"),
   "REMITTANCE_USER_ID": os.environ.get("REMITTANCE_USER_ID"), 
   "REMITTANCE_API_SECRET": os.environ.get("REMITTANCE_API_SECRET"),
   "REMITTANCE_PRIMARY_KEY": os.envieon.get("REMITTANCE_PRIMARY_KEY"),
   "DISBURSEMENT_USER_ID": os.environ.get("DISBURSEMENT_USER_ID"), 
   "DISBURSEMENT_API_SECRET": os.environ.get("DISBURSEMENTS_API_SECRET"),
   "DISBURSEMENT_PRIMARY_KEY": os.environ.get("DISBURSEMENT_PRIMARY_KEY"), 
}

You will only need to configure the variables for the product(s) you will be using.

Collections

The collections client can be created with the following paramaters. Note that the COLLECTION_USER_ID and COLLECTION_API_SECRET for production are provided on the MTN OVA dashboard;

  • COLLECTION_PRIMARY_KEY: Primary Key for the Collection product on the developer portal.
  • COLLECTION_USER_ID: For sandbox, use the one generated with the mtnmomo command.
  • COLLECTION_API_SECRET: For sandbox, use the one generated with the mtnmomo command.

You can create a collection client with the following:

import os
from mtnmomo.collection import Collection

client = Collection({
        "COLLECTION_USER_ID": os.environ.get("COLLECTION_USER_ID"),
        "COLLECTION_API_SECRET": os.environ.get("COLLECTION_API_SECRET"),
        "COLLECTION_PRIMARY_KEY": os.environ.get("COLLECTION_PRIMARY_KEY"),
    })

Methods

  1. requestToPay: This operation is used to request a payment from a consumer (Payer). The payer will be asked to authorize the payment. The transaction is executed once the payer has authorized the payment. The transaction will be in status PENDING until it is authorized or declined by the payer or it is timed out by the system. Status of the transaction can be validated by using getTransactionStatus.

  2. getTransactionStatus: Retrieve transaction information using the transactionId returned by requestToPay. You can invoke it at intervals until the transaction fails or succeeds. If the transaction has failed, it will throw an appropriate error.

  3. getBalance: Get the balance of the account.

  4. isPayerActive: check if an account holder is registered and active in the system.

Sample Code

import os
from mtnmomo.collection import Collection

client = Collection({
    "COLLECTION_USER_ID": os.environ.get("COLLECTION_USER_ID"),
    "COLLECTION_API_SECRET": os.environ.get("COLLECTION_API_SECRET"),
    "COLLECTION_PRIMARY_KEY": os.environ.get("COLLECTION_PRIMARY_KEY"),
})

client.requestToPay(
    mobile="256772123456", amount="600", external_id="123456789", payee_note="dd", payer_message="dd", currency="EUR")

Disbursement

The Disbursements client can be created with the following paramaters. Note that the DISBURSEMENT_USER_ID and DISBURSEMENT_API_SECRET for production are provided on the MTN OVA dashboard;

  • DISBURSEMENT_PRIMARY_KEY: Primary Key for the Disbursement product on the developer portal.
  • DISBURSEMENT_USER_ID: For sandbox, use the one generated with the mtnmomo command.
  • DISBURSEMENT_API_SECRET: For sandbox, use the one generated with the mtnmomo command.

You can create a disbursements client with the following

import os
from mtnmomo.disbursement import Disbursement

client = Disbursement({
    "DISBURSEMENT_USER_ID": os.environ.get("DISBURSEMENT_USER_ID"),
    "DISBURSEMENT_API_SECRET": os.environ.get("DISBURSEMENT_API_SECRET"),
    "DISBURSEMENT_PRIMARY_KEY": os.environ.get("DISBURSEMENT_PRIMARY_KEY"),
})

Methods

  1. transfer: Used to transfer an amount from the owner’s account to a payee account. Status of the transaction can be validated by using the getTransactionStatus method.

  2. getTransactionStatus: Retrieve transaction information using the transactionId returned by transfer. You can invoke it at intervals until the transaction fails or succeeds.

  3. getBalance: Get your account balance.

  4. isPayerActive: This method is used to check if an account holder is registered and active in the system.

Sample Code

import os
from mtnmomo.disbursement import Disbursement

client = Disbursement({
    "DISBURSEMENT_USER_ID": os.environ.get("DISBURSEMENT_USER_ID"),
    "DISBURSEMENT_API_SECRET": os.environ.get("DISBURSEMENT_API_SECRET"),
    "DISBURSEMENT_PRIMARY_KEY": os.environ.get("DISBURSEMENT_PRIMARY_KEY"),
})

client.transfer(amount="600", mobile="256772123456", external_id="123456789", payee_note="dd",      payer_message="dd", currency="EUR")

Thank you.