Merge branch 'pidcodes:master' into master

1209/2150/index.md

@@ -0,0 +1,9 @@
+---
+layout: pid
+title: Sensor Watch UF2 Bootloader
+owner: oddlyspecific
+license: CC-BY-SA 4.0 (hardware), MIT (firmware)
+site: https://github.com/joeycastillo/Sensor-Watch
+source: https://github.com/joeycastillo/uf2-samdx1
+---
+This PID identifies the Sensor Watch when in bootloader mode. When the Sensor Watch is running as a normal USB device, it uses [PID 2151](https://pid.codes/1209/2151/).

1209/2151/index.md

@@ -0,0 +1,9 @@
+---
+layout: pid
+title: Sensor Watch
+owner: oddlyspecific
+license: CC-BY-SA 4.0 (hardware), MIT (firmware)
+site: https://www.sensorwatch.net/
+source: https://github.com/joeycastillo/Sensor-Watch
+---
+The Sensor Watch is a board replacement for the classic Casio F-91W wristwatch. It is powered by a Microchip SAM L22 microcontroller with built-in segment LCD controller. You can write your own programs for the watch using the provided watch library, program the watch over USB using the built-in [UF2 bootloader](https://pid.codes/1209/2150/), and then install the board in your existing watch case to run your own software on your wrist.

1209/3304/index.md

@@ -1,11 +1,11 @@
 ---
 layout: pid
-title: 3-Key-Ecosystem 2key2
+title: 2key-keyboards
 owner: 3-Key-Ecosystem
 license: Apache 2.0
 site: https://github.com/softplus/3keyecosystem
-source: https://github.com/softplus/3keyecosystem/tree/main/2key2
+source: https://github.com/softplus/3keyecosystem/tree/main/2key
 ---
 
-This is a 2x1 switch USB macro-keyboard running on QMK.
-It has 2-LED RGB backlighting, and uses a modular base-board.
+This is for my 2x1 switch USB macro-keyboards running on QMK.
+It's used by both 2key1 (single LED per key) and 2key2 (RGB WS2812B LED per key), and uses a modular base-board.

1209/3305/index.md

@@ -0,0 +1,11 @@
+---
+layout: pid
+title: 4key-keyboards
+owner: 3-Key-Ecosystem
+license: Apache 2.0
+site: https://github.com/softplus/3keyecosystem
+source: https://github.com/softplus/3keyecosystem/tree/main/4key
+---
+
+This is for my 2x2 switch USB macro-keyboards running on QMK.
+It's used by both 4key1 (single LED per key) and 4key2 (RGB WS2812B LED per key), and uses a modular base-board.

1209/3306/index.md

@@ -0,0 +1,11 @@
+---
+layout: pid
+title: 6key-keyboards
+owner: 3-Key-Ecosystem
+license: Apache 2.0
+site: https://github.com/softplus/3keyecosystem
+source: https://github.com/softplus/3keyecosystem/tree/main/6key
+---
+
+This is for my 2x2 switch USB macro-keyboards running on QMK.
+It's used by both kai6 (single LED per key) and 6key2 (RGB WS2812B LED per key), and uses a modular base-board.

1209/4654/index.md

@@ -0,0 +1,9 @@
+---
+layout: pid
+title: Kasumigasane
+owner: e3w2q
+license: MIT
+site: https://github.com/e3w2q/Kasumigasane-keypad
+source: https://github.com/e3w2q/Kasumigasane-keypad
+---
+Simple 16-key keypad.

1209/4655/index.md

@@ -0,0 +1,9 @@
+---
+layout: pid
+title: Pangaea
+owner: Keytectonix
+license: MIT
+site: https://github.com/e3w2q/Pangaea-keyboard
+source: https://github.com/e3w2q/Pangaea-keyboard
+---
+Parts adjustable keyboard.

1209/4DF1/index.md

@@ -0,0 +1,8 @@
+---
+layout: pid
+title: BREAD 2040
+owner: OakDevelopmentTechnologies
+license: MIT
+site: https://github.com/skerr92/odt-dev-boards/tree/master/boards/BREAD%202040
+source: https://github.com/skerr92/circuitpython/tree/add-ODT-bread-2040/ports/raspberrypi/boards/odt_bread_2040
+---

1209/5054/index.md

@@ -0,0 +1,9 @@
+---
+layout: pid
+title: ES Timer
+owner: ES
+license: GPL-3.0
+site: https://github.com/ErfanSn/ES-Timer
+source: https://github.com/ErfanSn/ES-Timer
+---
+A USB timer powered by Digispark ATtiny85 according to pomodoro time management technique

1209/5385/index.md

@@ -0,0 +1,8 @@
+---
+layout: pid
+title: Pulse85 HW
+owner: brianthe.dev
+license: MIT (software), CC BY-SA 4.0 (hardware)
+site: https://pulse85.brianthe.dev/
+source: https://github.com/brian-the-dev/Pulse85
+---

1209/5AF1/index.md

@@ -0,0 +1,9 @@
+---
+layout: pid
+title: ButterStick DFU Bootloader
+owner: GoodStuffDepartment
+license: CERN OHL v1.2, BSD-2-Clause
+site: https://github.com/butterstick-fpga
+source: https://github.com/butterstick-fpga/butterstick-hardware
+---
+ButterStick is a compact ECP5 FPGA development board with DDR3L, High-speed USB,Gigabit ethernet, and SYZYGY interfaces

1209/6400/index.md

@@ -0,0 +1,9 @@
+---
+layout: pid
+title: AstroX64 Steering Wheel
+owner: 64BitAstro-Systems
+license: APACHE 2.0
+site: http://www.64bitastro-systems.cf/
+source: http://github.com/MostlyWhat/64BitAstro-Steering-Wheel
+---
+Steering Wheel Designed to be used with F1 Games from Codemasters. But any other games should work fine through key-mapping. (Powered by Unojoy)

1209/6939/index.md

@@ -0,0 +1,8 @@
+---
+layout: pid
+title: bongopad
+owner: bonzi
+license: CC BY-SA 4.0
+site: https://keebs.bonzi.sh/bonzi/bongopad
+source: https://github.com/bonzi/bongopad
+---

1209/80A0/index.md

@@ -0,0 +1,9 @@
+---
+layout: pid
+title: ATMega-Z80 - an 8 bit hobby computer
+owner: SyMat
+license: Open source, permissive licenses. Software: BSD-3, Hardware: CERN-OHL-P.
+site: https://github.com/symat/atmega-z80
+source: https://github.com/symat/atmega-z80
+---
+An open source hobby computer based on Z80 CPU and an ATMega MCU used for IO controller and other tasks. Check it out! ;)

1209/8191/index.md

@@ -0,0 +1,9 @@
+---
+layout: pid
+title: Insane MacroPad
+owner: MetalBoards
+license: MIT
+site: https://MetalBoards.tech/
+source: https://github.com/MetalBoards/InsaneMacroPad
+---
+The Insane MacroPad is a 16 Key Macro Pad with Dual Encoders powered by an Arduino Pro Micro

1209/9209/index.md

@@ -0,0 +1,9 @@
+---
+layout: pid
+title: aek
+owner: djvs
+license: CC BY-SA for hardware, GPL for firmware
+site: http://www.github.com/djvs/aek
+source: http://github.com/djvs/aek
+---
+Rockin awesome aek pcb

1209/A170/index.md

@@ -0,0 +1,8 @@
+---
+layout: pid
+title: ALT Avatar Motion Controller
+owner: PLA-LABS
+license: GNU GPLv3 & TAPR OHL
+site: https://plalabs.com/
+source: https://github.com/ALTEDGE/pla-alt-device
+---

1209/B0DE/index.md

@@ -0,0 +1,9 @@
+---
+layout: pid
+title: OHMMIDIMOD
+owner: ohmmusiccollective
+license: MIT
+site: https://gitlab.com/ohmmusiccollective/ohmmidimod-hardware
+source: https://gitlab.com/ohmmusiccollective/ohmmidimod-firmware
+---
+USB-MIDI-to-DCB converter for Roland JUNO-60 analog synthesizer.

1209/CA70/index.md

@@ -0,0 +1,9 @@
+---
+layout: pid
+title: Squishy
+owner: aki-nyan
+license: BSD-3-Clause
+site: https://github.com/lethalbit/squishy
+source: https://github.com/lethalbit/squishy
+---
+An open source multitool/toolkit for working with old SCSI devices with modern systems in a flexible manner.

1209/CA71/index.md

@@ -0,0 +1,9 @@
+---
+layout: pid
+title: Squishy Bootloader
+owner: aki-nyan
+license: BSD-3-Clause
+site: https://github.com/lethalbit/squishy
+source: https://github.com/lethalbit/squishy
+---
+Bootloader for Squishy, an open source multitool/toolkit for working with old SCSI devices with modern systems in a flexible manner.

1209/DECA/index.md

@@ -0,0 +1,10 @@
+---
+layout: pid
+title: DECA USB2 audio interface
+owner: OpenAudioGear
+license: CERN-OHL-W-2.0
+site: https://github.com/hansfbaier/deca-usb2-audio-interface/
+source: https://github.com/hansfbaier/deca-usb2-audio-interface/
+---
+Gateware for the Arrow/Terasic DECA FPGA development board to use
+it as a high speed USB2, class compliant audio interface

1209/FACA/index.md

@@ -0,0 +1,9 @@
+---
+layout: pid
+title: ControllaBLE
+owner: brunofreitas.com
+license: GPL 3.0
+site: https://github.com/bootsector/ControllaBLE
+source: https://github.com/bootsector/ControllaBLE
+---
+A retro-controllers to Bluetooth BLE adapter.

org/64BitAstro-Systems/index.md

@@ -0,0 +1,6 @@
+---
+layout: org
+title: 64BitAstro Systems
+site: http://www.64bitastro-systems.cf/
+---
+We aim to create free and open-source softwares for people to create things. We also create video games and paid software to help support going forward.

org/ES/index.md

@@ -0,0 +1,6 @@
+---
+layout: org
+title: ES
+site: https://github.com/ErfanSn
+---
+ES produces only open-source gadgets

org/Keytectonix/index.md

@@ -0,0 +1,5 @@
+---
+layout: org
+title: Keytectonix
+---
+Key Tectonic Lab.

org/MetalBoards/index.md

@@ -0,0 +1,6 @@
+---
+layout: org
+title: Metal Boards
+site: https://MetalBoards.tech/
+---
+Team making Small Distribution Keyboard & Macropad Projects

org/OpenAudioGear/index.md

@@ -0,0 +1,6 @@
+---
+layout: org
+title: OpenAudioGear
+site: https://github.com/hansfbaier
+---
+We develop open source hardware and software for professional audio

org/PLA-LABS/index.md

@@ -0,0 +1,6 @@
+---
+layout: org
+title: PLA LABS
+site: https://plalabs.com/
+---
+PLA LABS is the designer of the Avatar Motion Controller, a gaming controller designed to succeed the keyboard in the traditional keyboard/mouse combination.

org/SyMat/index.md

@@ -0,0 +1,6 @@
+---
+layout: org
+title: Mate Szalay-Beko (SyMat)
+site: https://www.linkedin.com/in/mate-szalay-beko
+---
+Software engineer, open source enthusiast (Apache member) living in Hungary.

org/aki-nyan/index.md

@@ -0,0 +1,6 @@
+---
+layout: org
+title: Aki-nyan
+site: https://twitter.com/lethalbit
+---
+abyssal witch, deranged catgirl hardware/software engineer, professional blåhaj cuddler.

org/bonzi/index.md

@@ -0,0 +1,6 @@
+---
+layout: org
+title: bonzi
+site: https://keebs.bonzi.sh/
+---
+bonzi's keebs

org/brianthe.dev/index.md

@@ -0,0 +1,6 @@
+---
+layout: org
+title: brianthe.dev
+site: https://brianthe.dev/
+---
+A programmer and FOSS enthusiast.

org/djvs/index.md

@@ -0,0 +1,6 @@
+---
+layout: org
+title: djvs
+site: http://www.github.com/djvs
+---
+Open source keyboard PCB(s)

org/oddlyspecific/index.md

@@ -0,0 +1,6 @@
+---
+layout: org
+title: Oddly Specific Objects
+site: https://www.oddlyspecific.org
+---
+Oddly Specific Objects aims to create comprehensible open source designs that democratize the knowledge required to create useful gadgets.

org/ohmmusiccollective/index.md

@@ -0,0 +1,5 @@
+---
+layout: org
+title: OHMMUSICCOLLECTIVE
+---
+We are a collective of young musicians and engineers developing open-source audio hardware.