Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Fix OdroidC1 fbdev vsync and panning #97

Merged
merged 2 commits into from
Apr 22, 2015
Merged

Fix OdroidC1 fbdev vsync and panning #97

merged 2 commits into from
Apr 22, 2015

Conversation

OtherCrashOverride
Copy link

No description provided.

mdrjr added a commit that referenced this pull request Apr 22, 2015
…anning

Fix OdroidC1 fbdev vsync and panning
@mdrjr mdrjr merged commit 6544606 into hardkernel:odroidc-3.10.y Apr 22, 2015
Dmole pushed a commit to Dmole/linux that referenced this pull request Jan 16, 2017
commit 1c7de2b upstream.

There is at least one Chelsio 10Gb card which uses VPD area to store some
non-standard blocks (example below).  However pci_vpd_size() returns the
length of the first block only assuming that there can be only one VPD "End
Tag".

Since 4e1a635 ("vfio/pci: Use kernel VPD access functions"), VFIO
blocks access beyond that offset, which prevents the guest "cxgb3" driver
from probing the device.  The host system does not have this problem as its
driver accesses the config space directly without pci_read_vpd().

Add a quirk to override the VPD size to a bigger value.  The maximum size
is taken from EEPROMSIZE in drivers/net/ethernet/chelsio/cxgb3/common.h.
We do not read the tag as the cxgb3 driver does as the driver supports
writing to EEPROM/VPD and when it writes, it only checks for 8192 bytes
boundary.  The quirk is registered for all devices supported by the cxgb3
driver.

This adds a quirk to the PCI layer (not to the cxgb3 driver) as the cxgb3
driver itself accesses VPD directly and the problem only exists with the
vfio-pci driver (when cxgb3 is not running on the host and may not be even
loaded) which blocks accesses beyond the first block of VPD data.  However
vfio-pci itself does not have quirks mechanism so we add it to PCI.

This is the controller:
Ethernet controller [0200]: Chelsio Communications Inc T310 10GbE Single Port Adapter [1425:0030]

This is what I parsed from its VPD:
===
b'\x82*\x0010 Gigabit Ethernet-SR PCI Express Adapter\x90J\x00EC\x07D76809 FN\x0746K'
 0000 Large item 42 bytes; name 0x2 Identifier String
	b'10 Gigabit Ethernet-SR PCI Express Adapter'
 002d Large item 74 bytes; name 0x10
	#00 [EC] len=7: b'D76809 '
	#0a [FN] len=7: b'46K7897'
	hardkernel#14 [PN] len=7: b'46K7897'
	#1e [MN] len=4: b'1037'
	hardkernel#25 [FC] len=4: b'5769'
	#2c [SN] len=12: b'YL102035603V'
	#3b [NA] len=12: b'00145E992ED1'
 007a Small item 1 bytes; name 0xf End Tag

 0c00 Large item 16 bytes; name 0x2 Identifier String
	b'S310E-SR-X      '
 0c13 Large item 234 bytes; name 0x10
	#00 [PN] len=16: b'TBD             '
	hardkernel#13 [EC] len=16: b'110107730D2     '
	hardkernel#26 [SN] len=16: b'97YL102035603V  '
	hardkernel#39 [NA] len=12: b'00145E992ED1'
	hardkernel#48 [V0] len=6: b'175000'
	hardkernel#51 [V1] len=6: b'266666'
	#5a [V2] len=6: b'266666'
	hardkernel#63 [V3] len=6: b'2000  '
	#6c [V4] len=2: b'1 '
	hardkernel#71 [V5] len=6: b'c2    '
	#7a [V6] len=6: b'0     '
	hardkernel#83 [V7] len=2: b'1 '
	hardkernel#88 [V8] len=2: b'0 '
	#8d [V9] len=2: b'0 '
	hardkernel#92 [VA] len=2: b'0 '
	hardkernel#97 [RV] len=80: b's\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'...
 0d00 Large item 252 bytes; name 0x11
	#00 [VC] len=16: b'122310_1222 dp  '
	hardkernel#13 [VD] len=16: b'610-0001-00 H1\x00\x00'
	hardkernel#26 [VE] len=16: b'122310_1353 fp  '
	hardkernel#39 [VF] len=16: b'610-0001-00 H1\x00\x00'
	#4c [RW] len=173: b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'...
 0dff Small item 0 bytes; name 0xf End Tag

10f3 Large item 13315 bytes; name 0x62
!!! unknown item name 98: b'\xd0\x03\x00@`\x0c\x08\x00\x00\x00\x00\x00\x00\x00\x00\x00'
===

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmole pushed a commit to Dmole/linux that referenced this pull request Dec 10, 2017
commit 6baea43 upstream.

KPROBES_SANITY_TEST throws the below splat when CONFIG_PREEMPT is
enabled:

  Kprobe smoke test: started
  DEBUG_LOCKS_WARN_ON(val > preempt_count())
  ------------[ cut here ]------------
  WARNING: CPU: 19 PID: 1 at kernel/sched/core.c:3094 preempt_count_sub+0xcc/0x140
  Modules linked in:
  CPU: 19 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc7-nnr+ hardkernel#97
  task: c0000000fea80000 task.stack: c0000000feb00000
  NIP:  c00000000011d3dc LR: c00000000011d3d8 CTR: c000000000a090d0
  REGS: c0000000feb03400 TRAP: 0700   Not tainted  (4.13.0-rc7-nnr+)
  MSR:  8000000000021033 <SF,ME,IR,DR,RI,LE>  CR: 28000282  XER: 00000000
  CFAR: c00000000015aa18 SOFTE: 0
  <snip>
  NIP preempt_count_sub+0xcc/0x140
  LR  preempt_count_sub+0xc8/0x140
  Call Trace:
    preempt_count_sub+0xc8/0x140 (unreliable)
    kprobe_handler+0x228/0x4b0
    program_check_exception+0x58/0x3b0
    program_check_common+0x16c/0x170
    --- interrupt: 0 at kprobe_target+0x8/0x20
                     LR = init_test_probes+0x248/0x7d0
    kp+0x0/0x80 (unreliable)
    livepatch_handler+0x38/0x74
    init_kprobes+0x1d8/0x208
    do_one_initcall+0x68/0x1d0
    kernel_init_freeable+0x298/0x374
    kernel_init+0x24/0x160
    ret_from_kernel_thread+0x5c/0x70
  Instruction dump:
  419effdc 3d22001b 39299240 81290000 2f890000 409effc8 3c82ffcb 3c62ffcb
  3884bc68 3863bc18 4803d5fd 60000000 <0fe00000> 4bffffa8 60000000 60000000
  ---[ end trace 432dd46b4ce3d29f ]---
  Kprobe smoke test: passed successfully

The issue is that we aren't disabling preemption in
kprobe_ftrace_handler(). Disable it.

Fixes: ead514d ("powerpc/kprobes: Add support for KPROBES_ON_FTRACE")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Trim oops a little for formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Feb 1, 2018
[ Upstream commit 02612bb ]

In pppoe_sendmsg(), reserving dev->hard_header_len bytes of headroom
was probably fine before the introduction of ->needed_headroom in
commit f5184d2 ("net: Allow netdevices to specify needed head/tailroom").

But now, virtual devices typically advertise the size of their overhead
in dev->needed_headroom, so we must also take it into account in
skb_reserve().
Allocation size of skb is also updated to take dev->needed_tailroom
into account and replace the arbitrary 32 bytes with the real size of
a PPPoE header.

This issue was discovered by syzbot, who connected a pppoe socket to a
gre device which had dev->header_ops->create == ipgre_header and
dev->hard_header_len == 0. Therefore, PPPoE didn't reserve any
headroom, and dev_hard_header() crashed when ipgre_header() tried to
prepend its header to skb->data.

skbuff: skb_under_panic: text:000000001d390b3a len:31 put:24
head:00000000d8ed776f data:000000008150e823 tail:0x7 end:0xc0 dev:gre0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:104!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 3670 Comm: syzkaller801466 Not tainted
4.15.0-rc7-next-20180115+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:skb_panic+0x162/0x1f0 net/core/skbuff.c:100
RSP: 0018:ffff8801d9bd7840 EFLAGS: 00010282
RAX: 0000000000000083 RBX: ffff8801d4f083c0 RCX: 0000000000000000
RDX: 0000000000000083 RSI: 1ffff1003b37ae92 RDI: ffffed003b37aefc
RBP: ffff8801d9bd78a8 R08: 1ffff1003b37ae8a R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff86200de0
R13: ffffffff84a981ad R14: 0000000000000018 R15: ffff8801d2d34180
FS:  00000000019c4880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000208bc000 CR3: 00000001d9111001 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  skb_under_panic net/core/skbuff.c:114 [inline]
  skb_push+0xce/0xf0 net/core/skbuff.c:1714
  ipgre_header+0x6d/0x4e0 net/ipv4/ip_gre.c:879
  dev_hard_header include/linux/netdevice.h:2723 [inline]
  pppoe_sendmsg+0x58e/0x8b0 drivers/net/ppp/pppoe.c:890
  sock_sendmsg_nosec net/socket.c:630 [inline]
  sock_sendmsg+0xca/0x110 net/socket.c:640
  sock_write_iter+0x31a/0x5d0 net/socket.c:909
  call_write_iter include/linux/fs.h:1775 [inline]
  do_iter_readv_writev+0x525/0x7f0 fs/read_write.c:653
  do_iter_write+0x154/0x540 fs/read_write.c:932
  vfs_writev+0x18a/0x340 fs/read_write.c:977
  do_writev+0xfc/0x2a0 fs/read_write.c:1012
  SYSC_writev fs/read_write.c:1085 [inline]
  SyS_writev+0x27/0x30 fs/read_write.c:1082
  entry_SYSCALL_64_fastpath+0x29/0xa0

Admittedly PPPoE shouldn't be allowed to run on non Ethernet-like
interfaces, but reserving space for ->needed_headroom is a more
fundamental issue that needs to be addressed first.

Same problem exists for __pppoe_xmit(), which also needs to take
dev->needed_headroom into account in skb_cow_head().

Fixes: f5184d2 ("net: Allow netdevices to specify needed head/tailroom")
Reported-by: syzbot+ed0838d0fa4c4f2b528e20286e6dc63effc7c14d@syzkaller.appspotmail.com
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
peak3d pushed a commit to peak3d/linux that referenced this pull request Mar 3, 2018
[ Upstream commit 02612bb ]

In pppoe_sendmsg(), reserving dev->hard_header_len bytes of headroom
was probably fine before the introduction of ->needed_headroom in
commit f5184d2 ("net: Allow netdevices to specify needed head/tailroom").

But now, virtual devices typically advertise the size of their overhead
in dev->needed_headroom, so we must also take it into account in
skb_reserve().
Allocation size of skb is also updated to take dev->needed_tailroom
into account and replace the arbitrary 32 bytes with the real size of
a PPPoE header.

This issue was discovered by syzbot, who connected a pppoe socket to a
gre device which had dev->header_ops->create == ipgre_header and
dev->hard_header_len == 0. Therefore, PPPoE didn't reserve any
headroom, and dev_hard_header() crashed when ipgre_header() tried to
prepend its header to skb->data.

skbuff: skb_under_panic: text:000000001d390b3a len:31 put:24
head:00000000d8ed776f data:000000008150e823 tail:0x7 end:0xc0 dev:gre0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:104!
invalid opcode: 0000 [hardkernel#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 3670 Comm: syzkaller801466 Not tainted
4.15.0-rc7-next-20180115+ hardkernel#97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:skb_panic+0x162/0x1f0 net/core/skbuff.c:100
RSP: 0018:ffff8801d9bd7840 EFLAGS: 00010282
RAX: 0000000000000083 RBX: ffff8801d4f083c0 RCX: 0000000000000000
RDX: 0000000000000083 RSI: 1ffff1003b37ae92 RDI: ffffed003b37aefc
RBP: ffff8801d9bd78a8 R08: 1ffff1003b37ae8a R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff86200de0
R13: ffffffff84a981ad R14: 0000000000000018 R15: ffff8801d2d34180
FS:  00000000019c4880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000208bc000 CR3: 00000001d9111001 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  skb_under_panic net/core/skbuff.c:114 [inline]
  skb_push+0xce/0xf0 net/core/skbuff.c:1714
  ipgre_header+0x6d/0x4e0 net/ipv4/ip_gre.c:879
  dev_hard_header include/linux/netdevice.h:2723 [inline]
  pppoe_sendmsg+0x58e/0x8b0 drivers/net/ppp/pppoe.c:890
  sock_sendmsg_nosec net/socket.c:630 [inline]
  sock_sendmsg+0xca/0x110 net/socket.c:640
  sock_write_iter+0x31a/0x5d0 net/socket.c:909
  call_write_iter include/linux/fs.h:1775 [inline]
  do_iter_readv_writev+0x525/0x7f0 fs/read_write.c:653
  do_iter_write+0x154/0x540 fs/read_write.c:932
  vfs_writev+0x18a/0x340 fs/read_write.c:977
  do_writev+0xfc/0x2a0 fs/read_write.c:1012
  SYSC_writev fs/read_write.c:1085 [inline]
  SyS_writev+0x27/0x30 fs/read_write.c:1082
  entry_SYSCALL_64_fastpath+0x29/0xa0

Admittedly PPPoE shouldn't be allowed to run on non Ethernet-like
interfaces, but reserving space for ->needed_headroom is a more
fundamental issue that needs to be addressed first.

Same problem exists for __pppoe_xmit(), which also needs to take
dev->needed_headroom into account in skb_cow_head().

Fixes: f5184d2 ("net: Allow netdevices to specify needed head/tailroom")
Reported-by: syzbot+ed0838d0fa4c4f2b528e20286e6dc63effc7c14d@syzkaller.appspotmail.com
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmole pushed a commit to Dmole/linux that referenced this pull request Mar 28, 2018
[ Upstream commit 8610783 ]

If fbdev emulation is disabled, the QXL shutdown path will try to clean
a framebuffer that wasn't initialized, hitting the Oops below.  The
problem is that even when FBDEV_EMULATION is disabled we allocate the
qfbdev strutucture, but we don't initialize it.  The fix is to stop
allocating the memory, since it won't be used.  This allows the existing
verification in the cleanup hook to do it's job preventing the oops.

Now that we don't allocate the unused fbdev structure, we need to be
careful when dereferencing it in the PM suspend hook.

[   24.284684] BUG: unable to handle kernel NULL pointer dereference at 00000000000002e0
[   24.285627] IP: mutex_lock+0x18/0x30
[   24.286049] PGD 78cdf067
[   24.286050] PUD 7940f067
[   24.286344] PMD 0
[   24.286649]
[   24.287072] Oops: 0002 [hardkernel#1] SMP
[   24.287422] Modules linked in: qxl
[   24.287806] CPU: 0 PID: 2328 Comm: bash Not tainted 4.10.0-rc5+ hardkernel#97
[   24.288515] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[   24.289681] task: ffff88007c4c0000 task.stack: ffffc90001b58000
[   24.290354] RIP: 0010:mutex_lock+0x18/0x30
[   24.290812] RSP: 0018:ffffc90001b5bcb0 EFLAGS: 00010246
[   24.291401] RAX: 0000000000000000 RBX: 00000000000002e0 RCX: 0000000000000000
[   24.292209] RDX: ffff88007c4c0000 RSI: 0000000000000001 RDI: 00000000000002e0
[   24.292987] RBP: ffffc90001b5bcb8 R08: fffffffffffffffe R09: 0000000000000001
[   24.293797] R10: ffff880078d80b80 R11: 0000000000011400 R12: 0000000000000000
[   24.294601] R13: 00000000000002e0 R14: ffffffffa0009c28 R15: 0000000000000060
[   24.295439] FS:  00007f30e3acbb40(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
[   24.296364] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   24.296997] CR2: 00000000000002e0 CR3: 0000000078c7b000 CR4: 00000000000006f0
[   24.297813] Call Trace:
[   24.298097]  drm_framebuffer_cleanup+0x1f/0x70
[   24.298612]  qxl_fbdev_fini+0x68/0x90 [qxl]
[   24.299074]  qxl_modeset_fini+0xd/0x30 [qxl]
[   24.299562]  qxl_pci_remove+0x22/0x50 [qxl]
[   24.300025]  pci_device_remove+0x34/0xb0
[   24.300507]  device_release_driver_internal+0x150/0x200
[   24.301082]  device_release_driver+0xd/0x10
[   24.301587]  unbind_store+0x108/0x150
[   24.301993]  drv_attr_store+0x20/0x30
[   24.302402]  sysfs_kf_write+0x32/0x40
[   24.302827]  kernfs_fop_write+0x108/0x190
[   24.303269]  __vfs_write+0x23/0x120
[   24.303678]  ? security_file_permission+0x36/0xb0
[   24.304193]  ? rw_verify_area+0x49/0xb0
[   24.304636]  vfs_write+0xb0/0x190
[   24.305004]  SyS_write+0x41/0xa0
[   24.305362]  entry_SYSCALL_64_fastpath+0x1a/0xa9
[   24.305887] RIP: 0033:0x7f30e31d9620
[   24.306285] RSP: 002b:00007ffc54b47e68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[   24.307128] RAX: ffffffffffffffda RBX: 00007f30e3497600 RCX: 00007f30e31d9620
[   24.307928] RDX: 000000000000000d RSI: 0000000000da2008 RDI: 0000000000000001
[   24.308727] RBP: 000000000070bc60 R08: 00007f30e3498760 R09: 00007f30e3acbb40
[   24.309504] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000001
[   24.310295] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffc54b47f34
[   24.311095] Code: 0e 01 e9 7b fe ff ff 66 90 66 2e 0f 1f 84 00 00 00 00 00
55 48 89 e5 53 48 89 fb e8 83 e8 ff ff 65 48 8b 14 25 40 c4 00 00 31 c0 <3e>
48 0f b1 13 48 85 c0 74 08 48 89 df e8 66 fd ff ff 5b 5d c3
[   24.313182] RIP: mutex_lock+0x18/0x30 RSP: ffffc90001b5bcb0
[   24.313811] CR2: 00000000000002e0
[   24.314208] ---[ end trace 29669c1593cae14b ]---

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227203330.18542-1-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Sep 10, 2018
commit d8ffee2 upstream.

Registers of DSPI should not be accessed before enabling its clock.  On
Toradex Colibri VF50 on Iris carrier board this could be seen during
bootup as imprecise abort:

    Unhandled fault: imprecise external abort (0x1c06) at 0x00000000
    Internal error: : 1c06 [#1] ARM
    Modules linked in:
    CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.39-dirty #97
    Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
    Backtrace:
    [<804166a8>] (regmap_write) from [<80466b5c>] (dspi_probe+0x1f0/0x8dc)
    [<8046696c>] (dspi_probe) from [<8040107c>] (platform_drv_probe+0x54/0xb8)
    [<80401028>] (platform_drv_probe) from [<803ff53c>] (driver_probe_device+0x280/0x2f8)
    [<803ff2bc>] (driver_probe_device) from [<803ff674>] (__driver_attach+0xc0/0xc4)
    [<803ff5b4>] (__driver_attach) from [<803fd818>] (bus_for_each_dev+0x70/0xa4)
    [<803fd7a8>] (bus_for_each_dev) from [<803fee74>] (driver_attach+0x24/0x28)
    [<803fee50>] (driver_attach) from [<803fe980>] (bus_add_driver+0x1a0/0x218)
    [<803fe7e0>] (bus_add_driver) from [<803fffe8>] (driver_register+0x80/0x100)
    [<803fff68>] (driver_register) from [<80400fdc>] (__platform_driver_register+0x48/0x50)
    [<80400f94>] (__platform_driver_register) from [<8091cf7c>] (fsl_dspi_driver_init+0x1c/0x20)
    [<8091cf60>] (fsl_dspi_driver_init) from [<8010195c>] (do_one_initcall+0x4c/0x174)
    [<80101910>] (do_one_initcall) from [<80900e8c>] (kernel_init_freeable+0x144/0x1d8)
    [<80900d48>] (kernel_init_freeable) from [<805ff6a8>] (kernel_init+0x10/0x114)
    [<805ff698>] (kernel_init) from [<80107be8>] (ret_from_fork+0x14/0x2c)

Cc: <stable@vger.kernel.org>
Fixes: 5ee67b5 ("spi: dspi: clear SPI_SR before enable interrupt")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mihailescu2m pushed a commit to mihailescu2m/linux that referenced this pull request Mar 20, 2019
[ Upstream commit 2a5ff07 ]

We keep receiving syzbot reports [1] that show that tunnels do not play
the rcu/IFF_UP rules properly.

At device dismantle phase, gro_cells_destroy() will be called
only after a full rcu grace period is observed after IFF_UP
has been cleared.

This means that IFF_UP needs to be tested before queueing packets
into netif_rx() or gro_cells.

This patch implements the test in gro_cells_receive() because
too many callers do not seem to bother enough.

[1]
BUG: unable to handle kernel paging request at fffff4ca0b9ffffe
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.0.0+ hardkernel#97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
kobject: 'loop2' (000000004bd7d84a): kobject_uevent_env
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0
Call Trace:
kobject: 'loop2' (000000004bd7d84a): fill_kobj_path: path = '/devices/virtual/block/loop2'
 ip_tunnel_dev_free+0x19/0x60 net/ipv4/ip_tunnel.c:1010
 netdev_run_todo+0x51c/0x7d0 net/core/dev.c:8970
 rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:116
 ip_tunnel_delete_nets+0x423/0x5f0 net/ipv4/ip_tunnel.c:1124
 vti_exit_batch_net+0x23/0x30 net/ipv4/ip_vti.c:495
 ops_exit_list.isra.0+0x105/0x160 net/core/net_namespace.c:156
 cleanup_net+0x3fb/0x960 net/core/net_namespace.c:551
 process_one_work+0x98e/0x1790 kernel/workqueue.c:2173
 worker_thread+0x98/0xe40 kernel/workqueue.c:2319
 kthread+0x357/0x430 kernel/kthread.c:246
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Modules linked in:
CR2: fffff4ca0b9ffffe
   [ end trace 513fc9c1338d1cb3 ]
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
kobject: 'loop3' (00000000e4ee57a6): kobject_uevent_env
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0

Fixes: c9e6bc6 ("net: add gro_cells infrastructure")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mihailescu2m pushed a commit to mihailescu2m/linux that referenced this pull request Mar 20, 2019
[ Upstream commit 1e02796 ]

syzbot found another add_timer() issue, this time in net/hsr [1]

Let's use mod_timer() which is safe.

[1]
kernel BUG at kernel/time/timer.c:1136!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 15909 Comm: syz-executor.3 Not tainted 5.0.0+ hardkernel#97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
kobject: 'loop2' (00000000f5629718): kobject_uevent_env
RIP: 0010:add_timer kernel/time/timer.c:1136 [inline]
RIP: 0010:add_timer+0x654/0xbe0 kernel/time/timer.c:1134
Code: 0f 94 c5 31 ff 44 89 ee e8 09 61 0f 00 45 84 ed 0f 84 77 fd ff ff e8 bb 5f 0f 00 e8 07 10 a0 ff e9 68 fd ff ff e8 ac 5f 0f 00 <0f> 0b e8 a5 5f 0f 00 0f 0b e8 9e 5f 0f 00 4c 89 b5 58 ff ff ff e9
RSP: 0018:ffff8880656eeca0 EFLAGS: 00010246
kobject: 'loop2' (00000000f5629718): fill_kobj_path: path = '/devices/virtual/block/loop2'
RAX: 0000000000040000 RBX: 1ffff1100caddd9a RCX: ffffc9000c436000
RDX: 0000000000040000 RSI: ffffffff816056c4 RDI: ffff88806a2f6cc8
RBP: ffff8880656eed58 R08: ffff888067f4a300 R09: ffff888067f4abc8
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88806a2f6cc0
R13: dffffc0000000000 R14: 0000000000000001 R15: ffff8880656eed30
FS:  00007fc2019bf700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000738000 CR3: 0000000067e8e000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 hsr_check_announce net/hsr/hsr_device.c:99 [inline]
 hsr_check_carrier_and_operstate+0x567/0x6f0 net/hsr/hsr_device.c:120
 hsr_netdev_notify+0x297/0xa00 net/hsr/hsr_main.c:51
 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
 call_netdevice_notifiers net/core/dev.c:1765 [inline]
 dev_open net/core/dev.c:1436 [inline]
 dev_open+0x143/0x160 net/core/dev.c:1424
 team_port_add drivers/net/team/team.c:1203 [inline]
 team_add_slave+0xa07/0x15d0 drivers/net/team/team.c:1933
 do_set_master net/core/rtnetlink.c:2358 [inline]
 do_set_master+0x1d4/0x230 net/core/rtnetlink.c:2332
 do_setlink+0x966/0x3510 net/core/rtnetlink.c:2493
 rtnl_setlink+0x271/0x3b0 net/core/rtnetlink.c:2747
 rtnetlink_rcv_msg+0x465/0xb00 net/core/rtnetlink.c:5192
 netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485
 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5210
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925
 sock_sendmsg_nosec net/socket.c:622 [inline]
 sock_sendmsg+0xdd/0x130 net/socket.c:632
 sock_write_iter+0x27c/0x3e0 net/socket.c:923
 call_write_iter include/linux/fs.h:1869 [inline]
 do_iter_readv_writev+0x5e0/0x8e0 fs/read_write.c:680
 do_iter_write fs/read_write.c:956 [inline]
 do_iter_write+0x184/0x610 fs/read_write.c:937
 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1001
 do_writev+0xf6/0x290 fs/read_write.c:1036
 __do_sys_writev fs/read_write.c:1109 [inline]
 __se_sys_writev fs/read_write.c:1106 [inline]
 __x64_sys_writev+0x75/0xb0 fs/read_write.c:1106
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457f29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fc2019bec78 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457f29
RDX: 0000000000000001 RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc2019bf6d4
R13: 00000000004c4a60 R14: 00000000004dd218 R15: 00000000ffffffff

Fixes: f421436 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Arvid Brodin <arvid.brodin@alten.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mihailescu2m pushed a commit to mihailescu2m/linux that referenced this pull request Mar 20, 2019
[ Upstream commit 95d6ebd ]

In case of failure x25_connect() does a x25_neigh_put(x25->neighbour)
but forgets to clear x25->neighbour pointer, thus triggering use-after-free.

Since the socket is visible in x25_list, we need to hold x25_list_lock
to protect the operation.

syzbot report :

BUG: KASAN: use-after-free in x25_kill_by_device net/x25/af_x25.c:217 [inline]
BUG: KASAN: use-after-free in x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252
Read of size 8 at addr ffff8880a030edd0 by task syz-executor003/7854

CPU: 0 PID: 7854 Comm: syz-executor003 Not tainted 5.0.0+ hardkernel#97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
 x25_kill_by_device net/x25/af_x25.c:217 [inline]
 x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252
 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
 call_netdevice_notifiers net/core/dev.c:1765 [inline]
 __dev_notify_flags+0x1e9/0x2c0 net/core/dev.c:7607
 dev_change_flags+0x10d/0x170 net/core/dev.c:7643
 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237
 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488
 sock_do_ioctl+0x1bd/0x300 net/socket.c:995
 sock_ioctl+0x32b/0x610 net/socket.c:1096
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4467c9
Code: e8 0c e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 07 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fdbea222d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000006dbc58 RCX: 00000000004467c9
RDX: 0000000020000340 RSI: 0000000000008914 RDI: 0000000000000003
RBP: 00000000006dbc50 R08: 00007fdbea223700 R09: 0000000000000000
R10: 00007fdbea223700 R11: 0000000000000246 R12: 00000000006dbc5c
R13: 6000030030626669 R14: 0000000000000000 R15: 0000000030626669

Allocated by task 7843:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc mm/kasan/common.c:495 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:468
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:509
 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3615
 kmalloc include/linux/slab.h:545 [inline]
 x25_link_device_up+0x46/0x3f0 net/x25/x25_link.c:249
 x25_device_event+0x116/0x2b0 net/x25/af_x25.c:242
 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
 call_netdevice_notifiers net/core/dev.c:1765 [inline]
 __dev_notify_flags+0x121/0x2c0 net/core/dev.c:7605
 dev_change_flags+0x10d/0x170 net/core/dev.c:7643
 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237
 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488
 sock_do_ioctl+0x1bd/0x300 net/socket.c:995
 sock_ioctl+0x32b/0x610 net/socket.c:1096
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 7865:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:457
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:465
 __cache_free mm/slab.c:3494 [inline]
 kfree+0xcf/0x230 mm/slab.c:3811
 x25_neigh_put include/net/x25.h:253 [inline]
 x25_connect+0x8d8/0xde0 net/x25/af_x25.c:824
 __sys_connect+0x266/0x330 net/socket.c:1685
 __do_sys_connect net/socket.c:1696 [inline]
 __se_sys_connect net/socket.c:1693 [inline]
 __x64_sys_connect+0x73/0xb0 net/socket.c:1693
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8880a030edc0
 which belongs to the cache kmalloc-256 of size 256
The buggy address is located 16 bytes inside of
 256-byte region [ffff8880a030edc0, ffff8880a030eec0)
The buggy address belongs to the page:
page:ffffea000280c380 count:1 mapcount:0 mapping:ffff88812c3f07c0 index:0x0
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea0002806788 ffffea00027f0188 ffff88812c3f07c0
raw: 0000000000000000 ffff8880a030e000 000000010000000c 0000000000000000
page dumped because: kasan: bad access detected

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+04babcefcd396fabec37@syzkaller.appspotmail.com
Cc: andrew hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Mar 21, 2019
[ Upstream commit 2a5ff07 ]

We keep receiving syzbot reports [1] that show that tunnels do not play
the rcu/IFF_UP rules properly.

At device dismantle phase, gro_cells_destroy() will be called
only after a full rcu grace period is observed after IFF_UP
has been cleared.

This means that IFF_UP needs to be tested before queueing packets
into netif_rx() or gro_cells.

This patch implements the test in gro_cells_receive() because
too many callers do not seem to bother enough.

[1]
BUG: unable to handle kernel paging request at fffff4ca0b9ffffe
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
kobject: 'loop2' (000000004bd7d84a): kobject_uevent_env
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0
Call Trace:
kobject: 'loop2' (000000004bd7d84a): fill_kobj_path: path = '/devices/virtual/block/loop2'
 ip_tunnel_dev_free+0x19/0x60 net/ipv4/ip_tunnel.c:1010
 netdev_run_todo+0x51c/0x7d0 net/core/dev.c:8970
 rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:116
 ip_tunnel_delete_nets+0x423/0x5f0 net/ipv4/ip_tunnel.c:1124
 vti_exit_batch_net+0x23/0x30 net/ipv4/ip_vti.c:495
 ops_exit_list.isra.0+0x105/0x160 net/core/net_namespace.c:156
 cleanup_net+0x3fb/0x960 net/core/net_namespace.c:551
 process_one_work+0x98e/0x1790 kernel/workqueue.c:2173
 worker_thread+0x98/0xe40 kernel/workqueue.c:2319
 kthread+0x357/0x430 kernel/kthread.c:246
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Modules linked in:
CR2: fffff4ca0b9ffffe
   [ end trace 513fc9c1338d1cb3 ]
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
kobject: 'loop3' (00000000e4ee57a6): kobject_uevent_env
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0

Fixes: c9e6bc6 ("net: add gro_cells infrastructure")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Mar 21, 2019
[ Upstream commit 1e02796 ]

syzbot found another add_timer() issue, this time in net/hsr [1]

Let's use mod_timer() which is safe.

[1]
kernel BUG at kernel/time/timer.c:1136!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 15909 Comm: syz-executor.3 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
kobject: 'loop2' (00000000f5629718): kobject_uevent_env
RIP: 0010:add_timer kernel/time/timer.c:1136 [inline]
RIP: 0010:add_timer+0x654/0xbe0 kernel/time/timer.c:1134
Code: 0f 94 c5 31 ff 44 89 ee e8 09 61 0f 00 45 84 ed 0f 84 77 fd ff ff e8 bb 5f 0f 00 e8 07 10 a0 ff e9 68 fd ff ff e8 ac 5f 0f 00 <0f> 0b e8 a5 5f 0f 00 0f 0b e8 9e 5f 0f 00 4c 89 b5 58 ff ff ff e9
RSP: 0018:ffff8880656eeca0 EFLAGS: 00010246
kobject: 'loop2' (00000000f5629718): fill_kobj_path: path = '/devices/virtual/block/loop2'
RAX: 0000000000040000 RBX: 1ffff1100caddd9a RCX: ffffc9000c436000
RDX: 0000000000040000 RSI: ffffffff816056c4 RDI: ffff88806a2f6cc8
RBP: ffff8880656eed58 R08: ffff888067f4a300 R09: ffff888067f4abc8
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88806a2f6cc0
R13: dffffc0000000000 R14: 0000000000000001 R15: ffff8880656eed30
FS:  00007fc2019bf700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000738000 CR3: 0000000067e8e000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 hsr_check_announce net/hsr/hsr_device.c:99 [inline]
 hsr_check_carrier_and_operstate+0x567/0x6f0 net/hsr/hsr_device.c:120
 hsr_netdev_notify+0x297/0xa00 net/hsr/hsr_main.c:51
 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
 call_netdevice_notifiers net/core/dev.c:1765 [inline]
 dev_open net/core/dev.c:1436 [inline]
 dev_open+0x143/0x160 net/core/dev.c:1424
 team_port_add drivers/net/team/team.c:1203 [inline]
 team_add_slave+0xa07/0x15d0 drivers/net/team/team.c:1933
 do_set_master net/core/rtnetlink.c:2358 [inline]
 do_set_master+0x1d4/0x230 net/core/rtnetlink.c:2332
 do_setlink+0x966/0x3510 net/core/rtnetlink.c:2493
 rtnl_setlink+0x271/0x3b0 net/core/rtnetlink.c:2747
 rtnetlink_rcv_msg+0x465/0xb00 net/core/rtnetlink.c:5192
 netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485
 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5210
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925
 sock_sendmsg_nosec net/socket.c:622 [inline]
 sock_sendmsg+0xdd/0x130 net/socket.c:632
 sock_write_iter+0x27c/0x3e0 net/socket.c:923
 call_write_iter include/linux/fs.h:1869 [inline]
 do_iter_readv_writev+0x5e0/0x8e0 fs/read_write.c:680
 do_iter_write fs/read_write.c:956 [inline]
 do_iter_write+0x184/0x610 fs/read_write.c:937
 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1001
 do_writev+0xf6/0x290 fs/read_write.c:1036
 __do_sys_writev fs/read_write.c:1109 [inline]
 __se_sys_writev fs/read_write.c:1106 [inline]
 __x64_sys_writev+0x75/0xb0 fs/read_write.c:1106
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457f29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fc2019bec78 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457f29
RDX: 0000000000000001 RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc2019bf6d4
R13: 00000000004c4a60 R14: 00000000004dd218 R15: 00000000ffffffff

Fixes: f421436 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Arvid Brodin <arvid.brodin@alten.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Mar 21, 2019
[ Upstream commit 95d6ebd ]

In case of failure x25_connect() does a x25_neigh_put(x25->neighbour)
but forgets to clear x25->neighbour pointer, thus triggering use-after-free.

Since the socket is visible in x25_list, we need to hold x25_list_lock
to protect the operation.

syzbot report :

BUG: KASAN: use-after-free in x25_kill_by_device net/x25/af_x25.c:217 [inline]
BUG: KASAN: use-after-free in x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252
Read of size 8 at addr ffff8880a030edd0 by task syz-executor003/7854

CPU: 0 PID: 7854 Comm: syz-executor003 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
 x25_kill_by_device net/x25/af_x25.c:217 [inline]
 x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252
 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
 call_netdevice_notifiers net/core/dev.c:1765 [inline]
 __dev_notify_flags+0x1e9/0x2c0 net/core/dev.c:7607
 dev_change_flags+0x10d/0x170 net/core/dev.c:7643
 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237
 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488
 sock_do_ioctl+0x1bd/0x300 net/socket.c:995
 sock_ioctl+0x32b/0x610 net/socket.c:1096
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4467c9
Code: e8 0c e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 07 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fdbea222d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000006dbc58 RCX: 00000000004467c9
RDX: 0000000020000340 RSI: 0000000000008914 RDI: 0000000000000003
RBP: 00000000006dbc50 R08: 00007fdbea223700 R09: 0000000000000000
R10: 00007fdbea223700 R11: 0000000000000246 R12: 00000000006dbc5c
R13: 6000030030626669 R14: 0000000000000000 R15: 0000000030626669

Allocated by task 7843:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc mm/kasan/common.c:495 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:468
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:509
 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3615
 kmalloc include/linux/slab.h:545 [inline]
 x25_link_device_up+0x46/0x3f0 net/x25/x25_link.c:249
 x25_device_event+0x116/0x2b0 net/x25/af_x25.c:242
 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
 call_netdevice_notifiers net/core/dev.c:1765 [inline]
 __dev_notify_flags+0x121/0x2c0 net/core/dev.c:7605
 dev_change_flags+0x10d/0x170 net/core/dev.c:7643
 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237
 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488
 sock_do_ioctl+0x1bd/0x300 net/socket.c:995
 sock_ioctl+0x32b/0x610 net/socket.c:1096
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 7865:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:457
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:465
 __cache_free mm/slab.c:3494 [inline]
 kfree+0xcf/0x230 mm/slab.c:3811
 x25_neigh_put include/net/x25.h:253 [inline]
 x25_connect+0x8d8/0xde0 net/x25/af_x25.c:824
 __sys_connect+0x266/0x330 net/socket.c:1685
 __do_sys_connect net/socket.c:1696 [inline]
 __se_sys_connect net/socket.c:1693 [inline]
 __x64_sys_connect+0x73/0xb0 net/socket.c:1693
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8880a030edc0
 which belongs to the cache kmalloc-256 of size 256
The buggy address is located 16 bytes inside of
 256-byte region [ffff8880a030edc0, ffff8880a030eec0)
The buggy address belongs to the page:
page:ffffea000280c380 count:1 mapcount:0 mapping:ffff88812c3f07c0 index:0x0
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea0002806788 ffffea00027f0188 ffff88812c3f07c0
raw: 0000000000000000 ffff8880a030e000 000000010000000c 0000000000000000
page dumped because: kasan: bad access detected

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+04babcefcd396fabec37@syzkaller.appspotmail.com
Cc: andrew hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Apr 16, 2019
[ Upstream commit 1e02796 ]

syzbot found another add_timer() issue, this time in net/hsr [1]

Let's use mod_timer() which is safe.

[1]
kernel BUG at kernel/time/timer.c:1136!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 15909 Comm: syz-executor.3 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
kobject: 'loop2' (00000000f5629718): kobject_uevent_env
RIP: 0010:add_timer kernel/time/timer.c:1136 [inline]
RIP: 0010:add_timer+0x654/0xbe0 kernel/time/timer.c:1134
Code: 0f 94 c5 31 ff 44 89 ee e8 09 61 0f 00 45 84 ed 0f 84 77 fd ff ff e8 bb 5f 0f 00 e8 07 10 a0 ff e9 68 fd ff ff e8 ac 5f 0f 00 <0f> 0b e8 a5 5f 0f 00 0f 0b e8 9e 5f 0f 00 4c 89 b5 58 ff ff ff e9
RSP: 0018:ffff8880656eeca0 EFLAGS: 00010246
kobject: 'loop2' (00000000f5629718): fill_kobj_path: path = '/devices/virtual/block/loop2'
RAX: 0000000000040000 RBX: 1ffff1100caddd9a RCX: ffffc9000c436000
RDX: 0000000000040000 RSI: ffffffff816056c4 RDI: ffff88806a2f6cc8
RBP: ffff8880656eed58 R08: ffff888067f4a300 R09: ffff888067f4abc8
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88806a2f6cc0
R13: dffffc0000000000 R14: 0000000000000001 R15: ffff8880656eed30
FS:  00007fc2019bf700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000738000 CR3: 0000000067e8e000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 hsr_check_announce net/hsr/hsr_device.c:99 [inline]
 hsr_check_carrier_and_operstate+0x567/0x6f0 net/hsr/hsr_device.c:120
 hsr_netdev_notify+0x297/0xa00 net/hsr/hsr_main.c:51
 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
 call_netdevice_notifiers net/core/dev.c:1765 [inline]
 dev_open net/core/dev.c:1436 [inline]
 dev_open+0x143/0x160 net/core/dev.c:1424
 team_port_add drivers/net/team/team.c:1203 [inline]
 team_add_slave+0xa07/0x15d0 drivers/net/team/team.c:1933
 do_set_master net/core/rtnetlink.c:2358 [inline]
 do_set_master+0x1d4/0x230 net/core/rtnetlink.c:2332
 do_setlink+0x966/0x3510 net/core/rtnetlink.c:2493
 rtnl_setlink+0x271/0x3b0 net/core/rtnetlink.c:2747
 rtnetlink_rcv_msg+0x465/0xb00 net/core/rtnetlink.c:5192
 netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485
 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5210
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925
 sock_sendmsg_nosec net/socket.c:622 [inline]
 sock_sendmsg+0xdd/0x130 net/socket.c:632
 sock_write_iter+0x27c/0x3e0 net/socket.c:923
 call_write_iter include/linux/fs.h:1869 [inline]
 do_iter_readv_writev+0x5e0/0x8e0 fs/read_write.c:680
 do_iter_write fs/read_write.c:956 [inline]
 do_iter_write+0x184/0x610 fs/read_write.c:937
 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1001
 do_writev+0xf6/0x290 fs/read_write.c:1036
 __do_sys_writev fs/read_write.c:1109 [inline]
 __se_sys_writev fs/read_write.c:1106 [inline]
 __x64_sys_writev+0x75/0xb0 fs/read_write.c:1106
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457f29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fc2019bec78 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457f29
RDX: 0000000000000001 RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc2019bf6d4
R13: 00000000004c4a60 R14: 00000000004dd218 R15: 00000000ffffffff

Fixes: f421436 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Arvid Brodin <arvid.brodin@alten.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Apr 16, 2019
[ Upstream commit 95d6ebd ]

In case of failure x25_connect() does a x25_neigh_put(x25->neighbour)
but forgets to clear x25->neighbour pointer, thus triggering use-after-free.

Since the socket is visible in x25_list, we need to hold x25_list_lock
to protect the operation.

syzbot report :

BUG: KASAN: use-after-free in x25_kill_by_device net/x25/af_x25.c:217 [inline]
BUG: KASAN: use-after-free in x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252
Read of size 8 at addr ffff8880a030edd0 by task syz-executor003/7854

CPU: 0 PID: 7854 Comm: syz-executor003 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
 x25_kill_by_device net/x25/af_x25.c:217 [inline]
 x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252
 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
 call_netdevice_notifiers net/core/dev.c:1765 [inline]
 __dev_notify_flags+0x1e9/0x2c0 net/core/dev.c:7607
 dev_change_flags+0x10d/0x170 net/core/dev.c:7643
 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237
 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488
 sock_do_ioctl+0x1bd/0x300 net/socket.c:995
 sock_ioctl+0x32b/0x610 net/socket.c:1096
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4467c9
Code: e8 0c e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 07 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fdbea222d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000006dbc58 RCX: 00000000004467c9
RDX: 0000000020000340 RSI: 0000000000008914 RDI: 0000000000000003
RBP: 00000000006dbc50 R08: 00007fdbea223700 R09: 0000000000000000
R10: 00007fdbea223700 R11: 0000000000000246 R12: 00000000006dbc5c
R13: 6000030030626669 R14: 0000000000000000 R15: 0000000030626669

Allocated by task 7843:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc mm/kasan/common.c:495 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:468
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:509
 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3615
 kmalloc include/linux/slab.h:545 [inline]
 x25_link_device_up+0x46/0x3f0 net/x25/x25_link.c:249
 x25_device_event+0x116/0x2b0 net/x25/af_x25.c:242
 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
 call_netdevice_notifiers net/core/dev.c:1765 [inline]
 __dev_notify_flags+0x121/0x2c0 net/core/dev.c:7605
 dev_change_flags+0x10d/0x170 net/core/dev.c:7643
 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237
 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488
 sock_do_ioctl+0x1bd/0x300 net/socket.c:995
 sock_ioctl+0x32b/0x610 net/socket.c:1096
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 7865:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:457
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:465
 __cache_free mm/slab.c:3494 [inline]
 kfree+0xcf/0x230 mm/slab.c:3811
 x25_neigh_put include/net/x25.h:253 [inline]
 x25_connect+0x8d8/0xde0 net/x25/af_x25.c:824
 __sys_connect+0x266/0x330 net/socket.c:1685
 __do_sys_connect net/socket.c:1696 [inline]
 __se_sys_connect net/socket.c:1693 [inline]
 __x64_sys_connect+0x73/0xb0 net/socket.c:1693
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8880a030edc0
 which belongs to the cache kmalloc-256 of size 256
The buggy address is located 16 bytes inside of
 256-byte region [ffff8880a030edc0, ffff8880a030eec0)
The buggy address belongs to the page:
page:ffffea000280c380 count:1 mapcount:0 mapping:ffff88812c3f07c0 index:0x0
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea0002806788 ffffea00027f0188 ffff88812c3f07c0
raw: 0000000000000000 ffff8880a030e000 000000010000000c 0000000000000000
page dumped because: kasan: bad access detected

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+04babcefcd396fabec37@syzkaller.appspotmail.com
Cc: andrew hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Apr 16, 2019
[ Upstream commit 2a5ff07 ]

We keep receiving syzbot reports [1] that show that tunnels do not play
the rcu/IFF_UP rules properly.

At device dismantle phase, gro_cells_destroy() will be called
only after a full rcu grace period is observed after IFF_UP
has been cleared.

This means that IFF_UP needs to be tested before queueing packets
into netif_rx() or gro_cells.

This patch implements the test in gro_cells_receive() because
too many callers do not seem to bother enough.

[1]
BUG: unable to handle kernel paging request at fffff4ca0b9ffffe
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
kobject: 'loop2' (000000004bd7d84a): kobject_uevent_env
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0
Call Trace:
kobject: 'loop2' (000000004bd7d84a): fill_kobj_path: path = '/devices/virtual/block/loop2'
 ip_tunnel_dev_free+0x19/0x60 net/ipv4/ip_tunnel.c:1010
 netdev_run_todo+0x51c/0x7d0 net/core/dev.c:8970
 rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:116
 ip_tunnel_delete_nets+0x423/0x5f0 net/ipv4/ip_tunnel.c:1124
 vti_exit_batch_net+0x23/0x30 net/ipv4/ip_vti.c:495
 ops_exit_list.isra.0+0x105/0x160 net/core/net_namespace.c:156
 cleanup_net+0x3fb/0x960 net/core/net_namespace.c:551
 process_one_work+0x98e/0x1790 kernel/workqueue.c:2173
 worker_thread+0x98/0xe40 kernel/workqueue.c:2319
 kthread+0x357/0x430 kernel/kthread.c:246
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Modules linked in:
CR2: fffff4ca0b9ffffe
   [ end trace 513fc9c1338d1cb3 ]
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
kobject: 'loop3' (00000000e4ee57a6): kobject_uevent_env
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0

Fixes: c9e6bc6 ("net: add gro_cells infrastructure")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Apr 16, 2019
[ Upstream commit e5dcc0c ]

rose_write_internal() uses a temp buffer of 100 bytes, but a manual
inspection showed that given arbitrary input, rose_create_facilities()
can fill up to 110 bytes.

Lets use a tailroom of 256 bytes for peace of mind, and remove
the bounce buffer : we can simply allocate a big enough skb
and adjust its length as needed.

syzbot report :

BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:352 [inline]
BUG: KASAN: stack-out-of-bounds in rose_create_facilities net/rose/rose_subr.c:521 [inline]
BUG: KASAN: stack-out-of-bounds in rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116
Write of size 7 at addr ffff88808b1ffbef by task syz-executor.0/24854

CPU: 0 PID: 24854 Comm: syz-executor.0 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 check_memory_region_inline mm/kasan/generic.c:185 [inline]
 check_memory_region+0x123/0x190 mm/kasan/generic.c:191
 memcpy+0x38/0x50 mm/kasan/common.c:131
 memcpy include/linux/string.h:352 [inline]
 rose_create_facilities net/rose/rose_subr.c:521 [inline]
 rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116
 rose_connect+0x7cb/0x1510 net/rose/af_rose.c:826
 __sys_connect+0x266/0x330 net/socket.c:1685
 __do_sys_connect net/socket.c:1696 [inline]
 __se_sys_connect net/socket.c:1693 [inline]
 __x64_sys_connect+0x73/0xb0 net/socket.c:1693
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458079
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f47b8d9dc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458079
RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000004
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f47b8d9e6d4
R13: 00000000004be4a4 R14: 00000000004ceca8 R15: 00000000ffffffff

The buggy address belongs to the page:
page:ffffea00022c7fc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x1fffc0000000000()
raw: 01fffc0000000000 0000000000000000 ffffffff022c0101 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88808b1ffa80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff88808b1ffb00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 03
>ffff88808b1ffb80: f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 04 f3
                                                             ^
 ffff88808b1ffc00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
 ffff88808b1ffc80: 00 00 00 00 00 00 00 f1 f1 f1 f1 f1 f1 01 f2 01

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Apr 16, 2019
[ Upstream commit e5dcc0c ]

rose_write_internal() uses a temp buffer of 100 bytes, but a manual
inspection showed that given arbitrary input, rose_create_facilities()
can fill up to 110 bytes.

Lets use a tailroom of 256 bytes for peace of mind, and remove
the bounce buffer : we can simply allocate a big enough skb
and adjust its length as needed.

syzbot report :

BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:352 [inline]
BUG: KASAN: stack-out-of-bounds in rose_create_facilities net/rose/rose_subr.c:521 [inline]
BUG: KASAN: stack-out-of-bounds in rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116
Write of size 7 at addr ffff88808b1ffbef by task syz-executor.0/24854

CPU: 0 PID: 24854 Comm: syz-executor.0 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 check_memory_region_inline mm/kasan/generic.c:185 [inline]
 check_memory_region+0x123/0x190 mm/kasan/generic.c:191
 memcpy+0x38/0x50 mm/kasan/common.c:131
 memcpy include/linux/string.h:352 [inline]
 rose_create_facilities net/rose/rose_subr.c:521 [inline]
 rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116
 rose_connect+0x7cb/0x1510 net/rose/af_rose.c:826
 __sys_connect+0x266/0x330 net/socket.c:1685
 __do_sys_connect net/socket.c:1696 [inline]
 __se_sys_connect net/socket.c:1693 [inline]
 __x64_sys_connect+0x73/0xb0 net/socket.c:1693
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458079
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f47b8d9dc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458079
RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000004
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f47b8d9e6d4
R13: 00000000004be4a4 R14: 00000000004ceca8 R15: 00000000ffffffff

The buggy address belongs to the page:
page:ffffea00022c7fc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x1fffc0000000000()
raw: 01fffc0000000000 0000000000000000 ffffffff022c0101 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88808b1ffa80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff88808b1ffb00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 03
>ffff88808b1ffb80: f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 04 f3
                                                             ^
 ffff88808b1ffc00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
 ffff88808b1ffc80: 00 00 00 00 00 00 00 f1 f1 f1 f1 f1 f1 01 f2 01

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Jul 16, 2019
commit 1e02796 upstream.

syzbot found another add_timer() issue, this time in net/hsr [1]

Let's use mod_timer() which is safe.

[1]
kernel BUG at kernel/time/timer.c:1136!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 15909 Comm: syz-executor.3 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
kobject: 'loop2' (00000000f5629718): kobject_uevent_env
RIP: 0010:add_timer kernel/time/timer.c:1136 [inline]
RIP: 0010:add_timer+0x654/0xbe0 kernel/time/timer.c:1134
Code: 0f 94 c5 31 ff 44 89 ee e8 09 61 0f 00 45 84 ed 0f 84 77 fd ff ff e8 bb 5f 0f 00 e8 07 10 a0 ff e9 68 fd ff ff e8 ac 5f 0f 00 <0f> 0b e8 a5 5f 0f 00 0f 0b e8 9e 5f 0f 00 4c 89 b5 58 ff ff ff e9
RSP: 0018:ffff8880656eeca0 EFLAGS: 00010246
kobject: 'loop2' (00000000f5629718): fill_kobj_path: path = '/devices/virtual/block/loop2'
RAX: 0000000000040000 RBX: 1ffff1100caddd9a RCX: ffffc9000c436000
RDX: 0000000000040000 RSI: ffffffff816056c4 RDI: ffff88806a2f6cc8
RBP: ffff8880656eed58 R08: ffff888067f4a300 R09: ffff888067f4abc8
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88806a2f6cc0
R13: dffffc0000000000 R14: 0000000000000001 R15: ffff8880656eed30
FS:  00007fc2019bf700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000738000 CR3: 0000000067e8e000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 hsr_check_announce net/hsr/hsr_device.c:99 [inline]
 hsr_check_carrier_and_operstate+0x567/0x6f0 net/hsr/hsr_device.c:120
 hsr_netdev_notify+0x297/0xa00 net/hsr/hsr_main.c:51
 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
 call_netdevice_notifiers net/core/dev.c:1765 [inline]
 dev_open net/core/dev.c:1436 [inline]
 dev_open+0x143/0x160 net/core/dev.c:1424
 team_port_add drivers/net/team/team.c:1203 [inline]
 team_add_slave+0xa07/0x15d0 drivers/net/team/team.c:1933
 do_set_master net/core/rtnetlink.c:2358 [inline]
 do_set_master+0x1d4/0x230 net/core/rtnetlink.c:2332
 do_setlink+0x966/0x3510 net/core/rtnetlink.c:2493
 rtnl_setlink+0x271/0x3b0 net/core/rtnetlink.c:2747
 rtnetlink_rcv_msg+0x465/0xb00 net/core/rtnetlink.c:5192
 netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485
 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5210
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925
 sock_sendmsg_nosec net/socket.c:622 [inline]
 sock_sendmsg+0xdd/0x130 net/socket.c:632
 sock_write_iter+0x27c/0x3e0 net/socket.c:923
 call_write_iter include/linux/fs.h:1869 [inline]
 do_iter_readv_writev+0x5e0/0x8e0 fs/read_write.c:680
 do_iter_write fs/read_write.c:956 [inline]
 do_iter_write+0x184/0x610 fs/read_write.c:937
 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1001
 do_writev+0xf6/0x290 fs/read_write.c:1036
 __do_sys_writev fs/read_write.c:1109 [inline]
 __se_sys_writev fs/read_write.c:1106 [inline]
 __x64_sys_writev+0x75/0xb0 fs/read_write.c:1106
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457f29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fc2019bec78 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457f29
RDX: 0000000000000001 RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc2019bf6d4
R13: 00000000004c4a60 R14: 00000000004dd218 R15: 00000000ffffffff

Fixes: f421436 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Arvid Brodin <arvid.brodin@alten.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
mdrjr pushed a commit that referenced this pull request Jul 16, 2019
commit 2a5ff07 upstream.

We keep receiving syzbot reports [1] that show that tunnels do not play
the rcu/IFF_UP rules properly.

At device dismantle phase, gro_cells_destroy() will be called
only after a full rcu grace period is observed after IFF_UP
has been cleared.

This means that IFF_UP needs to be tested before queueing packets
into netif_rx() or gro_cells.

This patch implements the test in gro_cells_receive() because
too many callers do not seem to bother enough.

[1]
BUG: unable to handle kernel paging request at fffff4ca0b9ffffe
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
kobject: 'loop2' (000000004bd7d84a): kobject_uevent_env
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0
Call Trace:
kobject: 'loop2' (000000004bd7d84a): fill_kobj_path: path = '/devices/virtual/block/loop2'
 ip_tunnel_dev_free+0x19/0x60 net/ipv4/ip_tunnel.c:1010
 netdev_run_todo+0x51c/0x7d0 net/core/dev.c:8970
 rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:116
 ip_tunnel_delete_nets+0x423/0x5f0 net/ipv4/ip_tunnel.c:1124
 vti_exit_batch_net+0x23/0x30 net/ipv4/ip_vti.c:495
 ops_exit_list.isra.0+0x105/0x160 net/core/net_namespace.c:156
 cleanup_net+0x3fb/0x960 net/core/net_namespace.c:551
 process_one_work+0x98e/0x1790 kernel/workqueue.c:2173
 worker_thread+0x98/0xe40 kernel/workqueue.c:2319
 kthread+0x357/0x430 kernel/kthread.c:246
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Modules linked in:
CR2: fffff4ca0b9ffffe
   [ end trace 513fc9c1338d1cb3 ]
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
kobject: 'loop3' (00000000e4ee57a6): kobject_uevent_env
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0

Fixes: c9e6bc6 ("net: add gro_cells infrastructure")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16:
 - Adjust filename, context
 - Return type is void]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
tobetter pushed a commit that referenced this pull request Mar 30, 2020
[ Upstream commit b09fe70 ]

There was a bug that was causing packets to be sent to the driver
without first calling dequeue() on the "child" qdisc. And the KASAN
report below shows that sending a packet without calling dequeue()
leads to bad results.

The problem is that when checking the last qdisc "child" we do not set
the returned skb to NULL, which can cause it to be sent to the driver,
and so after the skb is sent, it may be freed, and in some situations a
reference to it may still be in the child qdisc, because it was never
dequeued.

The crash log looks like this:

[   19.937538] ==================================================================
[   19.938300] BUG: KASAN: use-after-free in taprio_dequeue_soft+0x620/0x780
[   19.938968] Read of size 4 at addr ffff8881128628cc by task swapper/1/0
[   19.939612]
[   19.939772] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc3+ #97
[   19.940397] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qe4
[   19.941523] Call Trace:
[   19.941774]  <IRQ>
[   19.941985]  dump_stack+0x97/0xe0
[   19.942323]  print_address_description.constprop.0+0x3b/0x60
[   19.942884]  ? taprio_dequeue_soft+0x620/0x780
[   19.943325]  ? taprio_dequeue_soft+0x620/0x780
[   19.943767]  __kasan_report.cold+0x1a/0x32
[   19.944173]  ? taprio_dequeue_soft+0x620/0x780
[   19.944612]  kasan_report+0xe/0x20
[   19.944954]  taprio_dequeue_soft+0x620/0x780
[   19.945380]  __qdisc_run+0x164/0x18d0
[   19.945749]  net_tx_action+0x2c4/0x730
[   19.946124]  __do_softirq+0x268/0x7bc
[   19.946491]  irq_exit+0x17d/0x1b0
[   19.946824]  smp_apic_timer_interrupt+0xeb/0x380
[   19.947280]  apic_timer_interrupt+0xf/0x20
[   19.947687]  </IRQ>
[   19.947912] RIP: 0010:default_idle+0x2d/0x2d0
[   19.948345] Code: 00 00 41 56 41 55 65 44 8b 2d 3f 8d 7c 7c 41 54 55 53 0f 1f 44 00 00 e8 b1 b2 c5 fd e9 07 00 3
[   19.950166] RSP: 0018:ffff88811a3efda0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13
[   19.950909] RAX: 0000000080000000 RBX: ffff88811a3a9600 RCX: ffffffff8385327e
[   19.951608] RDX: 1ffff110234752c0 RSI: 0000000000000000 RDI: ffffffff8385262f
[   19.952309] RBP: ffffed10234752c0 R08: 0000000000000001 R09: ffffed10234752c1
[   19.953009] R10: ffffed10234752c0 R11: ffff88811a3a9607 R12: 0000000000000001
[   19.953709] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
[   19.954408]  ? default_idle_call+0x2e/0x70
[   19.954816]  ? default_idle+0x1f/0x2d0
[   19.955192]  default_idle_call+0x5e/0x70
[   19.955584]  do_idle+0x3d4/0x500
[   19.955909]  ? arch_cpu_idle_exit+0x40/0x40
[   19.956325]  ? _raw_spin_unlock_irqrestore+0x23/0x30
[   19.956829]  ? trace_hardirqs_on+0x30/0x160
[   19.957242]  cpu_startup_entry+0x19/0x20
[   19.957633]  start_secondary+0x2a6/0x380
[   19.958026]  ? set_cpu_sibling_map+0x18b0/0x18b0
[   19.958486]  secondary_startup_64+0xa4/0xb0
[   19.958921]
[   19.959078] Allocated by task 33:
[   19.959412]  save_stack+0x1b/0x80
[   19.959747]  __kasan_kmalloc.constprop.0+0xc2/0xd0
[   19.960222]  kmem_cache_alloc+0xe4/0x230
[   19.960617]  __alloc_skb+0x91/0x510
[   19.960967]  ndisc_alloc_skb+0x133/0x330
[   19.961358]  ndisc_send_ns+0x134/0x810
[   19.961735]  addrconf_dad_work+0xad5/0xf80
[   19.962144]  process_one_work+0x78e/0x13a0
[   19.962551]  worker_thread+0x8f/0xfa0
[   19.962919]  kthread+0x2ba/0x3b0
[   19.963242]  ret_from_fork+0x3a/0x50
[   19.963596]
[   19.963753] Freed by task 33:
[   19.964055]  save_stack+0x1b/0x80
[   19.964386]  __kasan_slab_free+0x12f/0x180
[   19.964830]  kmem_cache_free+0x80/0x290
[   19.965231]  ip6_mc_input+0x38a/0x4d0
[   19.965617]  ipv6_rcv+0x1a4/0x1d0
[   19.965948]  __netif_receive_skb_one_core+0xf2/0x180
[   19.966437]  netif_receive_skb+0x8c/0x3c0
[   19.966846]  br_handle_frame_finish+0x779/0x1310
[   19.967302]  br_handle_frame+0x42a/0x830
[   19.967694]  __netif_receive_skb_core+0xf0e/0x2a90
[   19.968167]  __netif_receive_skb_one_core+0x96/0x180
[   19.968658]  process_backlog+0x198/0x650
[   19.969047]  net_rx_action+0x2fa/0xaa0
[   19.969420]  __do_softirq+0x268/0x7bc
[   19.969785]
[   19.969940] The buggy address belongs to the object at ffff888112862840
[   19.969940]  which belongs to the cache skbuff_head_cache of size 224
[   19.971202] The buggy address is located 140 bytes inside of
[   19.971202]  224-byte region [ffff888112862840, ffff888112862920)
[   19.972344] The buggy address belongs to the page:
[   19.972820] page:ffffea00044a1800 refcount:1 mapcount:0 mapping:ffff88811a2bd1c0 index:0xffff8881128625c0 compo0
[   19.973930] flags: 0x8000000000010200(slab|head)
[   19.974388] raw: 8000000000010200 ffff88811a2ed650 ffff88811a2ed650 ffff88811a2bd1c0
[   19.975151] raw: ffff8881128625c0 0000000000190013 00000001ffffffff 0000000000000000
[   19.975915] page dumped because: kasan: bad access detected
[   19.976461] page_owner tracks the page as allocated
[   19.976946] page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NO)
[   19.978332]  prep_new_page+0x24b/0x330
[   19.978707]  get_page_from_freelist+0x2057/0x2c90
[   19.979170]  __alloc_pages_nodemask+0x218/0x590
[   19.979619]  new_slab+0x9d/0x300
[   19.979948]  ___slab_alloc.constprop.0+0x2f9/0x6f0
[   19.980421]  __slab_alloc.constprop.0+0x30/0x60
[   19.980870]  kmem_cache_alloc+0x201/0x230
[   19.981269]  __alloc_skb+0x91/0x510
[   19.981620]  alloc_skb_with_frags+0x78/0x4a0
[   19.982043]  sock_alloc_send_pskb+0x5eb/0x750
[   19.982476]  unix_stream_sendmsg+0x399/0x7f0
[   19.982904]  sock_sendmsg+0xe2/0x110
[   19.983262]  ____sys_sendmsg+0x4de/0x6d0
[   19.983660]  ___sys_sendmsg+0xe4/0x160
[   19.984032]  __sys_sendmsg+0xab/0x130
[   19.984396]  do_syscall_64+0xe7/0xae0
[   19.984761] page last free stack trace:
[   19.985142]  __free_pages_ok+0x432/0xbc0
[   19.985533]  qlist_free_all+0x56/0xc0
[   19.985907]  quarantine_reduce+0x149/0x170
[   19.986315]  __kasan_kmalloc.constprop.0+0x9e/0xd0
[   19.986791]  kmem_cache_alloc+0xe4/0x230
[   19.987182]  prepare_creds+0x24/0x440
[   19.987548]  do_faccessat+0x80/0x590
[   19.987906]  do_syscall_64+0xe7/0xae0
[   19.988276]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   19.988775]
[   19.988930] Memory state around the buggy address:
[   19.989402]  ffff888112862780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   19.990111]  ffff888112862800: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
[   19.990822] >ffff888112862880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   19.991529]                                               ^
[   19.992081]  ffff888112862900: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
[   19.992796]  ffff888112862980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Fixes: 5a781cc ("tc: Add support for configuring the taprio scheduler")
Reported-by: Michael Schmidt <michael.schmidt@eti.uni-siegen.de>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Apr 2, 2021
commit 92063f3 upstream.

The kernel may be built with multiple LSMs, but only a subset may be
enabled on the boot command line by specifying "lsm=".  Not including
"integrity" on the ordered LSM list may result in a NULL deref.

As reported by Dmitry Vyukov:
in qemu:
qemu-system-x86_64       -enable-kvm     -machine q35,nvdimm -cpu
max,migratable=off -smp 4       -m 4G,slots=4,maxmem=16G        -hda
wheezy.img      -kernel arch/x86/boot/bzImage   -nographic -vga std
 -soundhw all     -usb -usbdevice tablet  -bt hci -bt device:keyboard
   -net user,host=10.0.2.10,hostfwd=tcp::10022-:22 -net
nic,model=virtio-net-pci   -object
memory-backend-file,id=pmem1,share=off,mem-path=/dev/zero,size=64M
  -device nvdimm,id=nvdimm1,memdev=pmem1  -append "console=ttyS0
root=/dev/sda earlyprintk=serial rodata=n oops=panic panic_on_warn=1
panic=86400 lsm=smack numa=fake=2 nopcid dummy_hcd.num=8"   -pidfile
vm_pid -m 2G -cpu host

But it crashes on NULL deref in integrity_inode_get during boot:

Run /sbin/init as init process
BUG: kernel NULL pointer dereference, address: 000000000000001c
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc2+ #97
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.13.0-44-g88ab0c15525c-prebuilt.qemu.org 04/01/2014
RIP: 0010:kmem_cache_alloc+0x2b/0x370 mm/slub.c:2920
Code: 57 41 56 41 55 41 54 41 89 f4 55 48 89 fd 53 48 83 ec 10 44 8b
3d d9 1f 90 0b 65 48 8b 04 25 28 00 00 00 48 89 44 24 08 31 c0 <8b> 5f
1c 4cf
RSP: 0000:ffffc9000032f9d8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888017fc4f00 RCX: 0000000000000000
RDX: ffff888040220000 RSI: 0000000000000c40 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: ffff888019263627
R10: ffffffff83937cd1 R11: 0000000000000000 R12: 0000000000000c40
R13: ffff888019263538 R14: 0000000000000000 R15: 0000000000ffffff
FS:  0000000000000000(0000) GS:ffff88802d180000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000001c CR3: 000000000b48e000 CR4: 0000000000750ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 integrity_inode_get+0x47/0x260 security/integrity/iint.c:105
 process_measurement+0x33d/0x17e0 security/integrity/ima/ima_main.c:237
 ima_bprm_check+0xde/0x210 security/integrity/ima/ima_main.c:474
 security_bprm_check+0x7d/0xa0 security/security.c:845
 search_binary_handler fs/exec.c:1708 [inline]
 exec_binprm fs/exec.c:1761 [inline]
 bprm_execve fs/exec.c:1830 [inline]
 bprm_execve+0x764/0x19a0 fs/exec.c:1792
 kernel_execve+0x370/0x460 fs/exec.c:1973
 try_to_run_init_process+0x14/0x4e init/main.c:1366
 kernel_init+0x11d/0x1b8 init/main.c:1477
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
Modules linked in:
CR2: 000000000000001c
---[ end trace 22d601a500de7d79 ]---

Since LSMs and IMA may be configured at build time, but not enabled at
run time, panic the system if "integrity" was not initialized before use.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 79f7865 ("LSM: Introduce "lsm=" for boottime LSM selection")
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

Successfully merging this pull request may close these issues.

2 participants